1. Introduction
This manual provides essential information for the safe and effective use of your TLZWLA AWG30 Wrapping Wire. This product is designed for various electronic applications, including PCB prototyping, flying lead connections, and general jumpering, offering reliable conductivity with its tinned copper core and durable PVC insulation.
2. Safety Information
Please read and understand the following safety precautions before using the wrapping wire:
- This wire is intended for low-voltage applications. Do not use it in high-voltage circuits or for power transmission beyond its rated capacity.
- Always use appropriate tools (wire strippers, cutters) to prepare the wire. Improper tools can damage the insulation or conductor.
- Avoid direct contact with exposed wire ends when power is applied to a circuit.
- Ensure proper ventilation when soldering, as fumes can be harmful.
- Keep the wire away from sharp objects, excessive heat, and open flames to prevent insulation damage.
- Store the wire in a dry, cool place, out of reach of children.
3. Product Description
The TLZWLA AWG30 Wrapping Wire is a high-quality, multi-color wire designed for precision electronic work. It features a tinned copper solid core for excellent conductivity and ease of soldering, encased in durable PVC insulation. With 200 meters of wire in 8 distinct colors, it facilitates organized and efficient circuit building.

Figure 1: TLZWLA AWG30 Wrapping Wire spools.

Figure 2: Demonstration of wire flexibility and color variety.
4. Specifications
| Brand Name | TLZWLA |
| Model Number | ok |
| Wire Gauge | AWG30 |
| Length | 200 Meters |
| Number of Colors | 8 |
| Type | Low Voltage |
| Application | Industrial (Prototyping, PCB, Jumpering) |
| Conductor Material | Tinned Copper |
| Jacket Material | PE |
| Insulation Material | PVC |
| Origin | Mainland China |
| Certification | CE, RoHS |
| Customization | Yes |
| Wireless Functionality | No |
| Battery Included | No |
| High-Concerned Chemical | None |

Figure 3: Spool dimensions: Inner diameter 25mm (0.98in), Height 35mm (1.38in), Outer diameter 34mm (1.34in).
5. Setup and Preparation
Before using the wrapping wire, ensure your workspace is clean and well-lit.
- Unspooling: Gently pull the desired length of wire from the spool. Avoid pulling too hard to prevent tangles or kinks.
- Cutting: Use sharp wire cutters to cut the wire to the required length. Make clean, perpendicular cuts.
- Stripping: Use a precision wire stripper set to AWG30 to carefully remove the insulation from the ends of the wire. Strip only the necessary amount for your connection (typically 2-5mm). Be careful not to nick or damage the copper conductor.
6. Operating Instructions
This wire is ideal for various electronic connections:
- PCB Jumpering: For connecting points on a printed circuit board, bend the stripped wire ends to fit the pads or through-holes. Solder securely.
- Wire Wrapping: While primarily a soldering wire, it can be used for basic wire-wrap connections on compatible posts. Ensure the wire is tightly wrapped around the post for a reliable mechanical and electrical connection.
- Prototyping: Use in breadboards or perfboards for temporary or permanent connections. The solid core makes it easy to insert into breadboard holes.
- Soldering: The tinned copper conductor is designed for easy soldering. Use a fine-tip soldering iron and appropriate solder for small gauge wires. Ensure the joint is clean and shiny for a good connection.
7. Maintenance
- Storage: Keep the wire spools in their original packaging or a sealed container to protect them from dust, moisture, and physical damage.
- Handling: Avoid sharp bends or kinks in the wire, as this can weaken the conductor or damage the insulation.
- Inspection: Before use, visually inspect the wire for any signs of insulation damage or corrosion on the conductor. Do not use damaged wire.
8. Troubleshooting
- Poor Electrical Connection: Ensure the wire ends are properly stripped, the conductor is clean, and solder joints are solid and complete. Check for any nicks in the wire that might have broken the conductor.
- Insulation Damage: If insulation is damaged, cut out the damaged section and use a fresh piece of wire, or insulate with heat shrink tubing if appropriate for the application.
- Wire Breaks Easily: This can happen if the wire is repeatedly bent at the same point or if it was nicked during stripping. Handle with care and use proper stripping techniques.
9. User Tips
- Color Coding: Utilize the 8 different colors to organize your circuits, making debugging and modifications much easier. For example, use red for VCC, black for GND, blue for data lines, etc.
- Pre-tinning: For easier soldering, especially to small pads, consider pre-tinning the stripped ends of the wire with a small amount of solder.
- Heat Shrink: For robust and insulated connections, especially flying leads, use small diameter heat shrink tubing over your solder joints.
10. Frequently Asked Questions (FAQ)
- Q: What does AWG30 mean?
- A: AWG stands for American Wire Gauge. AWG30 is a very thin wire, commonly used for low-current signals and prototyping due to its small size.
- Q: Can this wire be used for power supply connections?
- A: It can be used for very low-power supply connections (e.g., powering small ICs), but it is not suitable for high-current applications due to its small gauge.
- Q: Is the wire solid or stranded?
- A: This is a solid core wire, which is ideal for breadboards and wire-wrap applications as it holds its shape well.
11. Warranty and Support
For warranty information, technical support, or any product-related inquiries, please contact your original seller or refer to the product listing page. Keep your purchase records for any warranty claims.