RASTP RS-STW017-TP

Contents

RASTP Car Sport Steering Wheel

Operating and Installing Instruction

Model: RS-STW017-TP

Introduction

Thank you for choosing the RASTP Car Sport Steering Wheel. This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your new steering wheel. Please read this instruction manual carefully before use and keep it for future reference.

This steering wheel is designed for universal car applications, offering a high-quality aluminum and PU construction for enhanced driving experience.

Safety Information

  • Always disconnect the positive pole of the car battery before beginning any installation work to prevent electrical hazards.
  • Ensure all screws are securely fastened after installation. Re-check the tightness of all six screws and the power cord connection after driving a few miles to ensure safety.
  • Professional installation is recommended if you are unfamiliar with automotive electrical systems or steering wheel replacement procedures.
  • ⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Installation Guide

Follow these steps carefully for proper installation:

1. Removing the Original Steering Wheel

  1. Position the original steering wheel in a balanced, straight-ahead position.
  2. Cut off the positive pole of the car battery to disable the electrical system.
  3. Carefully remove the cover of the original steering wheel, typically the horn pad.
  4. Unfix the screws that secure the original steering wheel to the steering column.
  5. Take out the original steering wheel by pulling it in the indicated direction, usually straight off the spline.

2. Installing the RASTP Steering Wheel

The RASTP steering wheel consists of several parts that need to be assembled and connected. Refer to the illustrative diagrams in the original manual for visual guidance on the construction and assembly of the steering wheel components, including the hub adapter, horn button, and wiring.

RASTP Car Sport Steering Wheel (Blue)

Image: RASTP Car Sport Steering Wheel (Blue) - Front view.

  1. Fix the Chassis: Securely attach the hub adapter (chassis) to the steering column spline. Ensure it is properly aligned and tightened.
  2. Fix the Electrical Source: Connect the horn wiring and any other electrical components as shown in the diagrams. Ensure all connections are firm and insulated.
  3. Fix the Screws: Attach the RASTP steering wheel to the hub adapter using the provided screws. Tighten all screws evenly and securely.
  4. Install Horn Button: Insert the horn button into the center of the steering wheel, ensuring its electrical connections are made.
RASTP Car Sport Steering Wheel Horn Wiring

Image: RASTP Car Sport Steering Wheel (Blue) - Horn wiring connections.

3. Post-Installation Check

After installation, reconnect the positive pole of the car battery. Test the horn and ensure all functions are working correctly. For safety, re-check the power cord and the six screws after driving a few miles to confirm they remain fixed and secure.

Installation Video Guide

Video: Product unboxing and overview, demonstrating the steering wheel and its components.

Operation

Once properly installed, the RASTP Car Sport Steering Wheel operates like any standard steering wheel. Ensure a firm grip and maintain control of the vehicle at all times. The horn button is integrated into the center of the wheel for easy access.

Maintenance

  • Cleaning: Use a soft, damp cloth to clean the steering wheel. Avoid harsh chemicals or abrasive cleaners that could damage the aluminum or PU material.
  • Fastener Check: Periodically inspect all mounting screws and electrical connections for tightness. Re-tighten if necessary to ensure secure attachment and proper function.
  • Storage: If the vehicle is stored for an extended period, ensure the steering wheel is clean and protected from extreme temperatures or direct sunlight.

Troubleshooting

Problem Possible Cause Solution
Steering wheel feels loose after installation. Mounting screws are not sufficiently tightened. Re-tighten all six mounting screws evenly. Check again after a short drive.
Horn is not working. Incorrect electrical connection for the horn, or battery not reconnected. Check horn wiring connections. Ensure the car battery's positive pole is reconnected.
Difficulty installing the steering wheel. Improper alignment or incorrect hub adapter. Review the installation steps carefully. Ensure the hub adapter is compatible with your vehicle. Seek professional assistance if needed.

Specifications

Feature Detail
Brand Name RASTP
Model Name RS-STW017-TP
Product Type Steering Wheel Accessories
Car Maker Compatibility Universal
Material Aluminum & PU
Diameter 14 inches (340MM)
Available Colors Red, Blue, Black, Grey, Yellow
Package Dimensions (approx.) 36 cm (Length) x 36 cm (Width) x 6 cm (Height)
Package Weight (approx.) 1.5 kg
Origin Mainland China
RASTP Car Sport Steering Wheel with Dimensions

Image: RASTP Car Sport Steering Wheel (Red) with approximate dimensions.

User Tips

  • While the steering wheel is universal, always double-check compatibility with your specific car model and ensure you have the correct hub adapter.
  • The product is designed for high durability, ensuring a long-lasting performance.
  • Installation is generally straightforward, but taking your time and following each step precisely will ensure a smooth process.

Warranty and Support

For detailed warranty information, technical support, or further inquiries, please refer to the official product documentation or contact the seller directly. It is recommended to keep this instruction manual and any purchase receipts for warranty purposes.

A user manual in PDF format is available for download: View User Manual (PDF)

© RASTP. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.