1. Introduction
The Douk Audio MC5 is a compact 4-channel analog stereo audio mixer designed for various audio mixing applications. It features four 3.5mm stereo inputs and one 3.5mm stereo output, along with a 3.5mm headphone jack. This mixer allows you to combine audio signals from sources such as CD players, instruments, portable recording devices, and video playback devices.
The MC5 supports both active and passive operating modes, offering flexibility for different setups and power requirements. Its passive circuit design ensures minimal interference to the sound quality, while the active mode provides amplification for a stronger output and direct headphone monitoring.
2. Features
- 4-Channel Stereo Inputs: Four independent 3.5mm stereo inputs for connecting multiple audio sources.
- Stereo Outputs: One 3.5mm AUX output and one 3.5mm headphone jack output.
- Dual Operating Modes: Supports Active mode (requires external USB power for amplification and headphone monitoring) and Passive mode (no power required, pure resistance attenuation).
- Independent Volume Control: Each of the four input channels has its own volume knob, along with a main output volume knob.
- Passive Circuit Design: Ensures high sonic quality with minimal interference, especially in passive mode.
- Compact and Durable: Mini size with an exquisite PCB+acrylic case, making it portable and robust.
- Input Impedance Switch: Features a DIP switch to select between 1K (default) and 4.7K impedance to better match various audio sources.
3. Product Overview
4. Setup and Connections
The MC5 mixer is designed for straightforward connection. Refer to the diagram below for typical setup configurations.
4.1. Connecting Audio Sources
- Connect up to four stereo audio sources (e.g., CD players, instruments, phones, computers) to the 3.5mm input jacks labeled 1, 2, 3, and 4.
- Ensure all connections are secure.
4.2. Connecting Audio Output
- Connect your output device (e.g., amplifier, recording interface) to the 3.5mm AUX output jack.
- If using headphones for monitoring in Active mode, connect them to the 3.5mm headphone jack. Note that the 3.5mm headphone jack output has priority; the 3.5mm AUX output on the back panel will automatically disconnect if headphones are inserted.
4.3. Power Connection (for Active Mode)
For Active mode operation, connect a DC 5V (0.5A) power supply to the Type-C USB port. It is crucial to use an independent USB power supply for the MC5 PRO and not share the same power supply with other audio devices to prevent common ground noise.
5. Operating Modes
The MC5 mixer offers two distinct operating modes:
5.1. Passive Mode
- Power Requirement: No external power is required.
- Functionality: The mixer operates as a pure resistance attenuation device.
- Output: The output audio signal will be slightly attenuated.
- Headphone Monitoring: The 3.5mm headphone jack output will NOT support direct headphone monitoring in this mode. An external headphone amplifier is necessary if headphone monitoring is desired.
5.2. Active Mode
- Power Requirement: Requires an independent DC 5V (0.5A) USB power supply connected via the Type-C port.
- Functionality: The built-in audio amplifier chip will boost the mixed audio signal, providing a larger output power.
- Headphone Monitoring: The 3.5mm headphone jack supports direct headphone monitoring.
- Important Note: Always use an independent USB power supply for the MC5 in active mode. Sharing a power supply with other audio devices can introduce common ground noise.
6. Controls
- Input Volume Knobs (1, 2, 3, 4): These four knobs independently control the volume level of each corresponding input channel. Adjust them to balance the levels of your connected audio sources.
- Main Output Volume Knob (VOL/OUT): This knob controls the overall output volume of the mixed audio signal.
- Input Impedance Switch: Located on the circuit board (visible in Figure 3), this DIP switch allows you to toggle the input impedance between 1K (default) and 4.7K. Adjust this setting to optimize compatibility and sound quality with different audio sources.
7. Specifications
| Parameter | Value |
|---|---|
| Brand | Douk Audio |
| Model | MC5 (XX-MC5) |
| Type | Audio Mixer |
| Channels | 4 |
| Audio Input | 4x 3.5mm AUX (Stereo) |
| Audio Output | 1x 3.5mm AUX, 1x 3.5mm Headphone Jack |
| Passive Mode Input Impedance | 50KΩ |
| Passive Mode Output Impedance | 4.7KΩ |
| Active Mode Working Voltage | DC 5V (0.5A) |
| Power Interface | Type-C USB |
| Active Mode Output Impedance | 30Ω |
| Dimensions (L*W*H) | 83.5*54*21mm / 3.29*2.13*0.83in (not including knobs) |
| Net Weight | 93g / 0.21lb |
| Package Weight | 132g / 0.29lb |
| Certification | CE |
8. Troubleshooting
- Common Ground Noise: If you experience noise, especially in Active mode, ensure you are using an independent USB power supply for the MC5. Do not share the power supply with other audio devices.
- Low Output Volume (Active Mode): If the output sound is very small, verify that the device is in Active mode and properly powered via the Type-C USB port.
- Headphone Monitoring Issues: In Passive mode, direct headphone monitoring is not supported; an external headphone amplifier is required. Active mode supports direct headphone monitoring.
- Noise Interference: Keep wireless devices such as Wi-Fi routers or mobile phones away from the MC5 mixer to prevent potential noise interference.
- No Output from AUX when Headphones are Connected: The 3.5mm headphone jack output has priority. If headphones are plugged in, the 3.5mm AUX output on the back panel will automatically disconnect.
- Input Compatibility: The MC5 is designed for standard audio signals (e.g., from CD/DVD players, phones). It cannot directly connect phono turntables or microphones without appropriate pre-amplification.
9. User Tips
- For portable setups where power is unavailable, the passive mode is convenient as it requires no battery or external power.
- If using multiple sources, be aware that passive mode may result in some volume loss. An active mode setup can provide necessary amplification for a stronger output.
- When adjusting volume knobs during live recording or performance, a slight static noise might occur. For best results, set your desired volume levels before starting a recording or performance.
- Experiment with the input impedance switch (1K/4.7K) to find the optimal setting for your specific audio sources, which can improve sound quality and compatibility.
- All inputs and outputs on the MC5 are stereo, allowing for full stereo signal mixing.
10. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the mixer. Avoid using liquid cleaners or solvents.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Handle the mixer with care to prevent physical damage to the knobs, jacks, or casing.
- Ventilation: Ensure adequate airflow around the device, especially if used in Active mode for extended periods, although passive mixers typically generate minimal heat.
11. Warranty and Support
The Douk Audio MC5 comes with a 2-year warranty, ensuring high-quality performance and reliability.
11.1. Contact Information
- Website: www.doukaudio.com
- Email: nobsound@doukaudio.com
- WeChat/Whatsapp: +86-17704028602
- Address: Room 1329, Wang Cheng Building, Long Guan East Road, Long Hua District, Shen Zhen, Guang Dong, China, 518000
11.2. Additional Resources
For a comprehensive guide and detailed diagrams, please refer to the official User Manual (PDF) available at: Douk Audio MC5 User Manual (PDF)
12. Product Demonstration Video
Watch this video for a visual demonstration of the Douk Audio MC5 mixer's features and operation: