AUXITO T15 W16W LED Bulb

Contents

AUXITO T15 W16W LED Bulb Instruction Manual

Model: T15 W16W LED Bulb

1. Introduction

Thank you for choosing AUXITO T15 W16W LED Bulbs. These high-brightness, energy-saving LED bulbs are designed to replace original halogen bulbs, offering enhanced illumination and warning effects. Featuring a shock-resistant and temperature-tolerant design, they are compatible with most vehicle models' corresponding light positions, primarily for reverse lights.

Key features include high flux 2020-SMD LED chips, rapid heat dissipation through a full aluminum housing and screw thread design, and an easy plug-and-play installation with CANBUS error-free functionality for most vehicles.

Two AUXITO T15 W16W LED bulbs and a car with bright reverse lights

Image: AUXITO T15 W16W LED bulbs and their bright illumination.

2. Safety & Warnings

  • CHOKING HAZARD: Small parts. Not for children under 3 years.
  • Voltage Compatibility: Exclusively for DC12V vehicle electrical systems. Never connect to 24V power sources to prevent LED burnout.
  • Handling: Handle with bare hands during installation. Do not touch LED chips with sharp objects to prevent damage.
  • Temperature: Avoid touching the lamp body after illumination, as it can become hot and cause burns.
  • Disassembly: Do not disassemble the lamp body; doing so will void the warranty.
  • Flickering: For turn signal or brake light applications (if applicable), ensure LED power compatibility to prevent flickering or failure.

3. Product Specifications

Model NameT15 W16W 920 921 912 906 902 904 LED Bulbs
Interface TypeT15
Rated VoltageDC12V
Wattage8.4W
Lumens1200LM
Light SourceLED (3pcs 2020SMD high power chip)
Color Temperature6500K White
Beam Angle360 Degree
Special FeaturesCanbus, No Error, OBC Error Free, Non-polarity, Plug and Play
Item Weight68g
Package Dimensions12cm (L) x 7cm (W) x 2cm (H)
Package Included2pcs T15 LED lights
Diagram showing 2020 SMD High Flux LED Chip details

Image: High Flux 2020-SMD LED Chip details.

Diagram showing bulb dimensions and focused light pattern

Image: Bulb dimensions and focused light for improved visibility.

Diagram illustrating rapid heat dissipation features

Image: Rapid heat dissipation design with full aluminum housing and screw threads.

4. Setup (Installation Steps)

Installation is direct plug-in and typically requires no modification.

  1. Prepare Vehicle: Before installation, turn off the vehicle power and remove the key from the ignition to prevent short circuits.
  2. Remove Original Bulb: Locate the original bulb socket. Pinch the socket and twist to remove the original bulb, or pull it straight out, depending on the socket type.
  3. Install LED Bulb: Align the AUXITO LED bulb with the socket and insert it fully. Gently shake the bulb to confirm secure seating.
  4. Test Illumination: Turn on the vehicle power to test if the new LED bulb illuminates.
  5. Troubleshoot (if needed): If the light fails to illuminate, remove the bulb, reverse its orientation (swap polarity), and reinsert. Ensure secure seating before replacing any socket covers or housing components.
Diagram showing easy plug and play installation

Image: Easy plug-and-play installation diagram, highlighting CANBUS error-free design.

5. Operating (Usage)

These AUXITO T15 W16W LED bulbs are designed primarily for use as Backup Reverse Lights. They are intended to replace halogen reverse lights only, providing brighter and more efficient illumination for improved visibility when reversing.

Images showing the effect of bright LED reverse lights

Image: Effect display showing enhanced visibility with LED reverse lights.

6. Maintenance

These LED bulbs are designed for durability and minimal maintenance. To ensure optimal performance and longevity:

  • Cleanliness: Keep the bulb surface clean from dirt and debris. Use a soft, dry cloth for cleaning.
  • Avoid Damage: Do not touch the LED chips with sharp objects.
  • No Disassembly: Do not attempt to disassemble the lamp body, as this will void the warranty and may damage the product.
  • Heat Management: While designed for rapid heat dissipation, ensure adequate space around the bulb within the light housing for proper airflow, especially if used in enclosed or tight spaces.

7. Troubleshooting

  • Light Does Not Illuminate: If the bulb does not light up after installation, remove it, reverse its orientation (polarity), and reinsert it firmly into the socket.
  • Flickering or Error Warning (Canbus Issues): Some vehicles equipped with sensitive Canbus systems may experience flickering or dashboard error warnings. While these bulbs are Canbus error-free for most vehicles, a few highly sensitive or European models might still require additional Canbus decoders (resistors) to resolve these issues. If decoders are used and the problem persists, you may be eligible for a refund.
  • Installation Space: In rare cases, some vehicle light housings may have limited installation space, preventing the bulb from fitting correctly. Please verify your vehicle's available space before purchase.

8. User Tips

  • Easy Installation: These bulbs are designed for a straightforward plug-and-play installation, making upgrades simple for most users.
  • Wide Compatibility: Compatible with a broad range of car models including Audi, Peugeot, Mercedes, Kia, Honda, Seat, Volkswagen, Ford Fiesta, BMW E46, E39, E90, E60, F10, F30, and more. Always confirm your vehicle's bulb type before purchasing.
  • Polarity Check: If the bulb doesn't light up, simply flip it 180 degrees and reinsert. This often resolves initial non-illumination issues.
  • Heat Dissipation: Although designed for reverse lights (intermittent use), ensure adequate space for heat dissipation, especially if your vehicle's light housing is particularly enclosed.

9. Warranty & Support

Warranty Information

AUXITO offers a 12-month warranty on this product from the date of purchase.

How to Claim Warranty:

  1. Take a clear photo showing the code located on the bottom of the lamp.
  2. Send the pictures to us via AliExpress message.
  3. After reviewing the pictures and confirming the issue, we will arrange for replacements.

Warranty Exclusions:

  • Damage caused by natural disasters (e.g., earthquake, flood).
  • Issues arising from limited installation space in specific vehicles.
  • Canbus issues where suitable decoders do not resolve the problem (though refunds may be offered in such cases).
  • Damage due to improper installation, misuse, or unauthorized modification.

Customer Support

For any questions, concerns, or support needs, please feel free to contact us directly through the AliExpress messaging system. We are committed to providing assistance and ensuring your satisfaction.

A detailed user manual in PDF format may also be available for download from the product page: View User Manual (PDF)

10. Compliance Information

Manufacturer Information

Manufacturer: SHENZHEN TUYAO AUTO ACCESSORIES CO.,LTD
Address: NO.504, BUILDIND 225, BULONG ROAD, MAANTANG COMMUN BANTIAN STREET, LONGGANG SHENZHEN 518028 GUANGDONG, CHINA
E-mail/Tel: Tuyao_AF@163.com / +86 15220052490

EU Authorized Representative

Company: APEX CE SPECIALISTS LIMITED
Address: Grafenberger Allee 277, 40237 Düsseldorf, DE
Contact: Wells Yan
Email: Info@apex-ce.com
Tel: +49 21312066043

Certifications

This product complies with relevant safety and environmental standards.

FC CE RoHS

Made in China

Recycling Information

Please dispose of this product and its accessories responsibly at designated collection points. Prioritize repair or donation of your device.

© 2024 AUXITO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.