CNSPEED YC101539

Contents

CNSPEED Turbo Boost Gauge Meter Filter

Model: YC101539

1. Introduction

The CNSPEED Turbo Boost Gauge Meter Filter (Model YC101539) is designed to protect your vehicle's turbo boost gauge from debris, dust, and other contaminants that can enter the vacuum/boost line. By filtering these particles, it helps maintain the accuracy and longevity of your boost gauge, ensuring reliable performance readings.

CNSPEED Turbo Boost Gauge Meter Filter

Figure 1: CNSPEED Turbo Boost Gauge Meter Filter

2. Setup and Installation

This filter is designed for a hassle-free setup and can be installed with ease. Ensure your vehicle's engine is off and cool before beginning installation.

2.1 Pre-Installation Check

  • Verify that the filter's inlet/outlet size is compatible with your boost gauge's vacuum/boost line.
  • Ensure you have appropriate tools, such as a hose cutter or sharp knife, and hose clamps if needed.

2.2 Installation Steps

  1. Locate the vacuum/boost line that connects to your turbo boost gauge.
  2. Carefully cut the boost line at a suitable point where the filter can be easily inserted and secured. Ensure the cut is clean and straight.
  3. Insert each end of the cut boost line onto the tapered nozzles of the filter. Push firmly to ensure a snug fit.
  4. If necessary, use small hose clamps (not included) on both ends of the filter to secure the lines and prevent leaks, especially in high-boost applications.
  5. Visually inspect all connections to ensure they are secure and free from kinks or potential leak points.
Filter Dimensions

Figure 2: Filter Dimensions (Length: 50.7mm / 2", Height: 20.9mm / 0.82")

WARNING: Ensure all connections are tight and secure to prevent vacuum/boost leaks, which can affect engine performance and gauge accuracy. Leaks can also pose a safety hazard.

3. Operating Instructions

The CNSPEED Turbo Boost Gauge Meter Filter operates passively. Once correctly installed, it continuously filters the air/pressure entering your boost gauge without requiring any user interaction. Its function is to prevent particulate matter from reaching the sensitive components of your gauge.

4. Maintenance

Regular maintenance of the filter ensures optimal performance of your boost gauge.

  • Inspection: Periodically inspect the filter element (visible through the clear housing) for discoloration, accumulation of debris, or signs of blockage. The frequency of inspection depends on your driving conditions and environment.
  • Replacement: Replace the filter if it appears heavily contaminated, discolored, or if you notice any erratic or sluggish readings from your boost gauge that could indicate a restriction. The filter is designed for easy replacement.
  • Cleaning: This filter is not designed to be cleaned; it should be replaced when contaminated.

5. Troubleshooting

ProblemPossible CauseSolution
Erratic or slow boost gauge readingsClogged filter element; Air leak in the boost lineInspect and replace filter if clogged. Check all boost line connections for leaks and secure them.
Leaks at filter connectionsLoose connections; Damaged filter housing or nozzlesEnsure boost lines are pushed fully onto the filter nozzles and secured with clamps. Inspect filter for cracks; replace if damaged.
Filter appears heavily cloggedExcessive debris in the boost lineReplace the filter. Consider checking the source of debris if clogging occurs frequently.

6. Specifications

FeatureDetail
BrandCNSPEED
Model NumberYC101539
MaterialHigh-quality ABS Plastic
Length50.7 mm (2 inches)
Height/Diameter20.9 mm (0.82 inches)
Special FeaturesInline Filter for Boost Gauges
Country/Region of ManufactureCN

7. User Tips

  • Hose Compatibility: Ensure the filter's tapered nozzles are compatible with your boost gauge hose diameter for a secure and leak-free fit.
  • Regular Inspection: Periodically inspect the filter for signs of contamination to maintain optimal gauge performance and prevent potential issues.
  • Keep a Spare: Given its critical role in protecting your gauge and its easy replacement, consider keeping a spare filter on hand for quick changes when needed.

8. Warranty and Support

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms, conditions, and support inquiries, please refer to the official product documentation or contact your retailer.

For additional detailed information and diagrams, you may consult the official user manual PDF: View User Manual PDF

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.