MICTUNING C1 8 Pods RGBW LED Rock Light

Contents

MICTUNING C1 8 Pods RGBW LED Rock Light User Manual

Model: C1 8 Pods RGBW LED Rock Light

Brand: MICTUNING

Introduction

Thank you for choosing the MICTUNING C1 8 Pods RGBW LED Rock Light kit. This product is designed to provide vibrant, customizable lighting for your vehicle, enhancing its appearance and functionality. Featuring advanced RGBW LED technology, a stable Bluetooth controller, and a user-friendly app, this kit offers pure colors and various lighting modes. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of your product.

Safety Information

  • Ensure the vehicle's power is disconnected before beginning installation to prevent electrical shock.
  • The controller is not waterproof. Install it in a location protected from rain and moisture.
  • Do not place the control box near the engine or any other hot areas to prevent overheating.
  • It is recommended to connect no more than 4 or 8 LED lights per safety circuit, depending on your specific setup, to prevent overloading.
  • Always use appropriate personal protective equipment during installation.
  • Ensure all wiring connections are secure and properly insulated to prevent short circuits.

Package Contents

The MICTUNING C1 8 Pods RGBW LED Rock Light kit includes the following components:

  • 8 x LED Rock Light Pods
  • 1 x Control Box (with integrated Bluetooth controller)
  • 1 x Fuse
  • 14 x Cable Ties
  • 16 x Screws
  • Installation Instructions (this manual)
MICTUNING C1 8 Pods RGBW LED Rock Light kit components, including 8 light pods, control box, and wiring.
Figure 1: Package Contents Overview

Specifications

Feature Specification
Model Name Led Rock Lights (C1 RGBW)
Input Voltage DC 9-32V
Output Power 5A (max)
Control Mode Mobile Phone App (Bluetooth)
Gray Scale 256-256-256
Total Brightness Level 8 grades
Operating Temperature -20°C to 50°C
Waterproof Rating IP68
Lifespan Up to 50,000 hours
Material Aircraft Aluminum Housing (for heat dissipation), Plastic
Special Features Wireless Control, Music Mode, Pure White Light, Broadcom Dual-mode Chip for stable connection, 11.5ft extendable wire
Certification CE

Setup and Installation

The C1/C2 rock lights are designed for straightforward installation. The following steps outline the general process:

  1. Plan Mounting Locations: Determine the desired locations for each of the 8 rock light pods on your vehicle. Consider areas under the chassis, wheel wells, or other desired accent locations. The 11.5ft extendable wire provides flexibility for placement.
    Examples of rock light placement on various vehicles like Jeeps, pickups, RVs, boats, and UTVs.
    Figure 2: Wide Application Examples
  2. Mount the Pods: Securely attach each LED rock light pod using the provided screws. The kit includes two types of fixed frames for versatile mounting.
    Close-up of an 8-pod rock light, showing its design and mounting points.
    Figure 3: Individual Rock Light Pod
  3. Install the Control Box: Choose a dry location for the control box, away from direct exposure to rain, moisture, and high heat sources like the engine. Secure it using appropriate fasteners.
    MICTUNING control box with an internal Broadcom chip and an external safety protection fuse.
    Figure 4: Control Box with Broadcom Chip and Safety Fuse
  4. Wiring Connections:
    • Connect the red wire from the control box to the positive (+) terminal of your vehicle's 12V/24V power source. Ensure the provided fuse is installed on this line for protection.
    • Connect the black wire from the control box to the negative (-) terminal or a suitable ground point on your vehicle.
    • Connect the individual rock light pods to the control box using the waterproof connectors. Ensure all connections are tight and secure.

    The system uses a 5-core waterproof connector for reliable connections, even in challenging environments.

    Close-up of a 5-core waterproof connector, highlighting its robust design for wet conditions.
    Figure 5: 5-Core Waterproof Connector
  5. Secure Wiring: Use the provided cable ties to neatly route and secure all wiring, keeping it away from moving parts, sharp edges, and heat sources.

Operating Instructions

1. App Installation and Bluetooth Connection

  1. Download the App: Scan the QR code provided in the physical manual or on the control box to download the official MICTUNING app for your iOS or Android device.
    Screenshot of the user-friendly MICTUNING app interface for personalizing colors and patterns.
    Figure 6: User-Friendly App Interface
  2. Enable Bluetooth: Ensure Bluetooth is enabled on your mobile phone.
  3. Connect to Device: Open the MICTUNING app. The app will automatically search for and connect to the rock light controller upon initial use. If prompted, authorize the app for Bluetooth access. For some Android phones, you may need to manually pair the device in your phone's general Bluetooth settings the first time.
  4. Multi-Set Control: The app allows you to control multiple sets of 4-pod or 8-pod rock lights simultaneously. Select the desired devices and use the 'Group' button for synchronized operation.

2. App Features and Lighting Modes

Once connected, you can control your rock lights through the app's various features:

  • Home Page: Provides quick access to settings, Bluetooth on/off, and navigation to other control modes.
    Video 1: Product demonstration showing app control and color changes.
  • Color Option:
    • Constant Colors: Select from a wide spectrum of 16 million RGBW colors using the color wheel. The C1 features a dedicated pure white light, unlike many other RGB lights that produce mixed or mottled white.
    • DIY Page: Customize your own color effects. Adjust change speed, brightness, strobe speed, and flash speed.
    Comparison image showing the pure white light of C1 RGBW rock lights versus the mixed colors of other rock lights.
    Figure 7: Pure Color Output Comparison
  • Music Mode: Synchronize your rock lights with your music. The lights will flash and change color according to the rhythm and beat of the music playing on your phone.
  • Settings Page: Access advanced settings such as 'Shake' for random color changes, 'Add Groups' to manage multiple light sets, 'Delete' for removing configurations, and 'Edit' for modifying group control popups.

Maintenance

  • Regularly inspect all wiring and connections for any signs of wear, damage, or corrosion.
  • Keep the light pods clean from dirt, mud, and debris. Use a soft cloth and mild cleaning solution if necessary.
  • Ensure the control box remains in a dry, protected environment.
  • Check the fuse periodically and replace it with one of the same rating if it blows.
  • The aircraft aluminum housing is designed for better heat dissipation, but ensure no obstructions block airflow around the pods.

Troubleshooting

Bluetooth Connection Failure

Situation 1: The Bluetooth device signal cannot be searched in the APP.

  1. Check Power and Fuse: Verify that the rock lights are receiving power. Check the line fuse to ensure it is intact and correctly installed. Under normal power-on conditions, the lights should illuminate.
  2. Proximity: Ensure your phone is within 15 meters (approximately 50 feet) of the control box in an open environment. Obstacles can reduce Bluetooth range.
  3. Exclusive Connection: Confirm that the Bluetooth device is not already connected to another mobile phone. Only one phone can be connected to the device at a time.

Situation 2: The APP searched for the Bluetooth signal but could not connect.

  1. App Authorization: Ensure the MICTUNING app has been granted all necessary permissions, especially for Bluetooth access, on your mobile device.
  2. Android Specific Pairing: For some Android phones, the initial connection may require you to manually turn on Bluetooth for pairing within your phone's general settings before the app can connect normally.
  3. Phone Model Compatibility: While rare, some phone models might experience connection issues. If problems persist, please contact customer support.

User Tips

  • For optimal light distribution, consider mounting the pods evenly around the vehicle's undercarriage.
  • Experiment with different color and music modes to find the perfect ambiance for various occasions or driving conditions.
  • Regularly update the MICTUNING app to ensure you have the latest features and bug fixes for the best performance.
  • While the product is IP68 waterproof, avoid prolonged submersion of the pods and ensure the control box is always protected from water.

Warranty and Support

The MICTUNING C1 8 Pods RGBW LED Rock Light kit comes with a 2-year limited warranty. For warranty claims, technical support, or any questions not covered in this manual, please contact MICTUNING customer service.

For additional guides and documents, including a detailed user manual in PDF format, please refer to the official product page or contact MICTUNING support. The PDF manual can be found at: User manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.