AUXITO T10 LED Light Bulbs User Manual

1. Product Information

This manual provides essential information for the safe and effective use of your AUXITO T10 LED Light Bulbs. Please read it thoroughly before installation and use.

Product Name:

LED Light Bulb

Model Numbers:

T10, T15, T20, 7443, 7440, T25, 3157, 3156, 1156, 1157, etc.

Batch/Serial Number:

AUX-010

2. Safety & Warnings

• WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years.
• Exclusively for DC12V vehicle electrical systems. Never connect to 24V power sources to prevent LED burnout.
• Handle with bare hands during installation; do not touch LED chips with sharp objects to prevent damage.
• Avoid touching the lamp body after illumination to prevent burns from high temperatures.
• Do not disassemble the lamp body; doing so will void the warranty.
• For turn signal/brake light models, ensure LED power compatibility to prevent flickering or failure.

3. Product Features

The AUXITO LED Light Bulbs are designed to replace original halogen bulbs, offering enhanced illumination and warning effects with advanced technology.

• Quality Assurance: Extraordinary quality, low power consumption, eco-friendly.
• 360° Illumination: Equipped with 1pcs 3030SMD + 12pcs 4014 SMD for comprehensive, no dark spot illumination.
• Universal T10/194 Connector: Improved plug design ensures a tight fit into original sockets.
• Built-in Intelligent IC Driver: Ensures constant current and Canbus error-free operation for 95%+ vehicles.
• High Brightness: 300% brighter than standard halogen bulbs, providing 6500K white light.
• Non-polarity Design: Plug & play for easy installation.

4. Setup and Installation

These LED bulbs are designed for direct plug-in installation without modification.

Installation Steps:

1. Before installation, turn off the vehicle power and remove the key to prevent short circuits.
2. Locate the original socket. Pinch the socket and twist to remove the original bulb, or pull it straight out.
3. Align this bulb with the socket and insert fully. Gently shake to confirm secure seating.
4. Turn on power to test illumination.

If the light fails to illuminate, remove the bulb, reverse its orientation (swap polarity), and reinsert. Ensure secure seating before replacing the socket cover.

5. Operating Instructions

These LED bulbs are designed for various interior and exterior vehicle lighting applications, providing bright, consistent illumination.

Applications:

• Clearance Lights
• Reading Light
• Map Light
• Dome Light
• Interior Light
• Glove Box Light
• Door Light
• Trunk Light
• License Plate Light

Note: The application varies for different vehicles; these bulbs may not fit all positions on one vehicle.

6. Maintenance

These LED bulbs are designed for durability and minimal maintenance. Keep them clean and free from debris for optimal performance.

• Regularly check for secure seating in the socket.
• Avoid exposing the bulbs to harsh chemicals or abrasive cleaners.
• Ensure proper ventilation around the bulb area to prevent excessive heat buildup, which can affect lifespan.

7. Troubleshooting

Common Issues and Solutions:

• Light fails to illuminate:
  • Check if the bulb is securely seated in the socket.
  • Reverse the bulb's orientation (swap polarity) and reinsert.
  • Ensure vehicle power is on.
• Canbus Problem (flickering, error warning):
  • Some vehicles equipped with a Canbus system may experience flickering or error warnings.
  • Connect suitable decoders (load resistors) to resolve these Canbus problems. If decoders do not work, you may need to return for a full refund.
• Installation Problem (limited installation space):
  • Some vehicles may not be able to install the bulbs due to limited installation space. Verify compatibility and available space before purchase.

8. Specifications

9. User Tips

• Many users report excellent performance and brightness with no errors, especially for parking lights and interior applications.
• For vehicles with sensitive Canbus systems (e.g., some VW models), consider using external decoders if flickering or error messages occur, even though the bulbs have a built-in IC driver.
• Ensure the T10 socket type matches your vehicle's requirements for internal lights, such as those in a Jeep Compass.
• Proper installation and polarity are key for immediate illumination. If the bulb doesn't light up, simply flip it 180 degrees.
• While designed for longevity, ensuring good heat dissipation in enclosed fixtures can further extend the lifespan of the LEDs.

10. Warranty & Support

Manufacturer:

SHENZHEN TUYAO AUTO ACCESSORIES CO.,LTD

EU Authorized Representative:

Importer:

[Importer Name, Full Address] - (Please refer to your product packaging for specific importer details.)

Warranty Exclusions:

The following conditions are beyond the scope of warranty:

• Canbus Problem: Issues arising from vehicle Canbus incompatibility without suitable decoder use.
• Installation Problem: Inability to install due to limited vehicle installation space.
• Natural Disaster: Damages due to irresistible natural disasters like earthquake, flood, etc.

For additional information, you may refer to the official user manual PDF: View User Manual (PDF)

11. Compliance Information

This product complies with relevant European and international standards.

• EC REP: European Community Representative.
• FC CE RoHS: Indicates compliance with FCC regulations, CE marking for European conformity, and RoHS directive for hazardous substances.
• WEEE Symbol: The crossed-out wheeled bin symbol indicates that the product should not be disposed of with household waste. It should be handed over to an applicable collection point for the recycling of electrical and electronic equipment.
• Made in China.

French Recycling Information:

Cet appareil et ses accessoires se recyclent. Déposer en magasin ou en déchèterie. Points de collecte sur www.quefairedemesdechets.fr. Privilégiez la réparation ou le don de votre appareil!