ZHRIVOER XB2-BD21

Contents

ZHRIVOER XB2-BD21 Series Rotary Switch Instruction Manual

Model: XB2-BD21

Brand: ZHRIVOER

1. Introduction

This manual provides instructions for the safe installation, operation, and maintenance of the ZHRIVOER XB2-BD21 series 2-position self-locking latching rotary switch. This switch is designed for industrial control applications, offering reliable on-off control with a maintained action.

Two ZHRIVOER XB2-BD21 rotary switches showing the knob and contact block

Figure 1: ZHRIVOER XB2-BD21 Rotary Switches

2. Safety Information

Please read and understand all safety instructions before installing or operating this device. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Always disconnect power to the circuit before installing, wiring, or performing any maintenance on the switch.
  • Installation and wiring should only be performed by qualified personnel in accordance with all local and national electrical codes.
  • Ensure the switch's electrical ratings (voltage, current) are compatible with your application.
  • This device is designed for low voltage applications: Below 50Vac or 75Vdc.
  • Do not use the switch in environments exceeding its specified operating conditions.

3. Package Contents

Verify that all components are present and undamaged upon opening the package:

  • 1 x ZHRIVOER XB2-BD21 Rotary Switch Unit

4. Specifications

Attribute Value
Brand Name ZHRIVOER
Model Number XB2-BD21
Item Type SWITCHES
Switch Type Knob switch
Features On-Off, 2 Positions Rotating, Self-locking Latching, 1 NO Contact
Current Rating 10A
Material Alloy
Hole Diameter 22mm
EU LVD Voltage Low voltage: Below 50Vac or 75Vdc
High-concerned chemical None
Certification RoHS, CE, CCC
Is Smart Device Yes
Origin Mainland China

5. Installation and Wiring

Follow these steps for proper installation:

  1. Prepare Mounting Hole: Ensure a 22mm diameter hole is available on your control panel for mounting the switch.
  2. Mount the Switch: Insert the switch body through the mounting hole from the front of the panel. Secure it from the rear using the provided locking nut and washer.
  3. Connect Wiring: The XB2-BD21 model features 1 Normally Open (NO) contact. Refer to the wiring diagram below for correct connections.
Side view of the rotary switch showing the contact block and mounting bracket

Figure 2: Switch Assembly Detail

5.1 Wiring Diagram

The following diagram illustrates the contact types and their states. For the XB2-BD21 with 1 Normally Open (NO) contact, focus on the row labeled '1常开1常闭' (1 NO 1 NC) and understand that your specific model will only utilize the Normally Open contact behavior. The diagram shows the default state and the state when the knob is rotated (pressed status).

Wiring diagram showing contact types (1NO1NC, 2NO, 2NC) and their default and activated states with green for open and red for closed

Figure 3: Contact Type and Schematic Diagram

  • Contact Type: The XB2-BD21 is a 1 Normally Open (NO) switch.
  • Default State: In its default position, the Normally Open contact is open (circuit broken).
  • Activated State: When the knob is rotated to the activated position, the Normally Open contact closes (circuit connected).

For more detailed wiring instructions and specific application diagrams, please refer to the official user manual PDF.

6. Operation

The XB2-BD21 is a 2-position self-locking (maintained) rotary switch. This means the switch will remain in the position it is set to until manually changed.

  1. Position 1 (Default): In this position, the 1 Normally Open (NO) contact is open, meaning the circuit is disconnected.
  2. Position 2 (Activated): Rotate the knob to the second position. The switch will latch into this position, and the 1 Normally Open (NO) contact will close, connecting the circuit.
  3. Changing State: To return to Position 1, rotate the knob back. The switch will again latch into this position, and the NO contact will open.

7. Maintenance

Regular maintenance helps ensure the longevity and reliable operation of your rotary switch.

  • Cleaning: Keep the switch clean and free from dust, dirt, and debris. Use a soft, dry cloth for cleaning. Avoid using abrasive cleaners or solvents.
  • Inspection: Periodically inspect the switch for any signs of wear, damage, or loose connections. Ensure the knob rotates smoothly and latches securely.
  • Environmental Conditions: Ensure the switch is not exposed to excessive moisture, extreme temperatures, or corrosive substances beyond its operating specifications.

8. Troubleshooting

If you encounter issues with your rotary switch, consider the following common troubleshooting steps:

  • Switch Not Responding:
    • Check if the power supply to the circuit is active.
    • Verify all wiring connections are secure and correctly terminated according to the wiring diagram (Figure 3).
    • Ensure the switch knob is fully rotated and latched into the desired position.
  • Intermittent Operation:
    • Inspect for loose wiring connections or damaged insulation.
    • Check for any foreign objects obstructing the switch mechanism.

If problems persist after performing these checks, consult a qualified electrician or contact customer support.

9. User Tips

  • Reliable Operation: Ensure proper wiring and secure mounting for reliable and consistent operation.
  • On-Off Functionality: The switch acts as an on-off mechanism, either breaking or connecting the circuit depending on its 2-position setting.
  • Single Channel: This model is typically designed for single-channel operation (1 NO contact).

10. Warranty and Support

This ZHRIVOER rotary switch comes with a 2-year warranty from the date of purchase, covering defects in materials and workmanship under normal use.

For further technical assistance, detailed diagrams, or warranty claims, please refer to the comprehensive user manual available in PDF format: View User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.