Introduction
This manual provides essential information for the safe and effective use of RiccoDi UL10064 Micro Litz Wire. This high-conductivity, insulated wire is designed for various electrical applications, particularly within household appliances, and is available in multiple AWG sizes. Please read this manual thoroughly before use to ensure proper handling and installation.
Safety Warnings
Observe the following safety guidelines when working with electrical wire:
- Do not use this wire in excessively humid environments unless specifically rated for such conditions.
- Never connect or disconnect the wire from a power source while the circuit is live. Always ensure power is off.
- Do not overload the wire by exceeding its rated current capacity. This can lead to overheating and potential hazards.
- Avoid storing the wire in high-temperature environments, as this can degrade the insulation.
- Keep all electrical components, including this wire, out of reach of children.
Product Features
The RiccoDi UL10064 Micro Litz Wire offers the following characteristics:
- High Conductivity: Made with copper conductors for efficient electrical transmission.
- Stranded Design: Features a litz wire construction (multiple fine strands) for flexibility and reduced skin effect at higher frequencies.
- Insulated: Provides electrical isolation for safe operation.
- UL Certified: Meets Underwriters Laboratories safety standards.
- Versatile: Compatible with various interface types and suitable for a range of household appliance applications.
The wire is available in different colors and gauges:

This image displays three spools of RiccoDi UL10064 Micro Litz Wire, clearly labeled with their respective colors: Black, White, and Red. The UL10064 standard is also visible.
Individual color options:



Setup and Installation
When integrating the UL10064 Micro Litz Wire into an electrical system, follow these general steps for making a secure connection:
- Ensure Power is Off: Before beginning any wiring, confirm that the power supply to the circuit is completely disconnected.
- Prepare the Wire: Carefully strip the insulation from the end of the wire to expose the copper conductor. Take care not to cut or damage the fine litz strands.
- Prepare the Connection Point: Ensure the terminal, connector, or component where the wire will be attached is clean, dry, and free of any debris or corrosion.
- Make the Connection: Align the prepared wire end with the designated connection point. Insert the wire and secure it firmly, whether by soldering, crimping, or using a screw terminal. Ensure a robust and stable mechanical and electrical connection.
- Verify Connection: Double-check all connections for proper alignment, tightness, and absence of stray strands that could cause a short circuit.
- Apply Power: Only re-apply power to the system after all connections have been thoroughly checked and confirmed to be secure and correct.
Operating Guidelines
Once properly installed, the UL10064 Micro Litz Wire functions as part of your electrical circuit. Adhere to the following guidelines during operation:
- Match Specifications: Always ensure that the wire's AWG size and material are appropriate for the voltage and current requirements of your specific application. Using an undersized wire can lead to overheating and potential fire hazards.
- Environmental Conditions: Operate the wired system within environmental conditions (temperature, humidity) that are suitable for the wire's insulation and overall design.
- Disconnection Procedure: If disconnection is necessary, always power off the device or circuit completely before attempting to remove the wire.
Maintenance and Care
To ensure the longevity and reliable performance of your RiccoDi UL10064 Micro Litz Wire, follow these maintenance and care recommendations:
- Regular Visual Inspection: Periodically inspect the wire and its connections for any signs of physical damage, such as cuts, abrasions, fraying of strands, or discoloration of the insulation.
- Cleanliness: Keep the wire and its connection points clean from dust, dirt, moisture, and any corrosive substances that could degrade performance or insulation.
- Proper Storage: Store any unused wire in a cool, dry place, away from direct sunlight, extreme temperatures, and chemicals. Keep it neatly coiled to prevent kinks or damage.
- Avoid Overloading: Continuously monitor that the electrical load on the wire does not exceed its specified current rating. Overloading is a primary cause of wire degradation and failure.
Troubleshooting
If you encounter issues related to the wire's performance, consult the following table for common problems and their solutions:
| Problem | Possible Cause / Solution |
|---|---|
| Poor electrical contact | Check whether the wire ends or connection points are clean and free of oxidation, dirt, or loose strands. Re-strip and re-terminate the wire if necessary to ensure a solid connection. |
| Circuit failure (e.g., no power, intermittent signal) | Verify that the power supply to the circuit is turned on and functioning correctly. Check the continuity of the wire using a multimeter. Inspect all connections for looseness or incorrect wiring. |
| Abnormal heating of the wire | Immediately discontinue use and disconnect power. This indicates an overload or short circuit. Inspect the wiring for any shorts, ensure the wire gauge is sufficient for the current draw, and verify there are no damaged sections. Consult a qualified electrician if the cause is not apparent. |
Specifications
| Attribute | Detail |
|---|---|
| Model Number | UL10064 26-36AWG |
| Brand Name | RiccoDi |
| Type | Insulated Wire |
| Conductor Type | Stranded (Litz Wire) |
| Conductor Material | Copper |
| Insulation Material | Rubber (as per product specifications) |
| Application | Household Appliances, General Electrical Wiring |
| Certification | UL |
| Origin | Mainland China |
| Length per Lot | 10 Meters |
| Approx. Package Weight | 0.03 kg |
| Approx. Package Dimensions | 12 x 11 x 20 cm |
User Tips
Based on common inquiries and user feedback, here are some helpful tips for using your RiccoDi UL10064 Micro Litz Wire:
- Stranded Count: The UL10064 specification implies a stranded wire. Users have confirmed the presence of multiple internal strands (e.g., "seven wires inside standard"), which is typical for litz wire and contributes to its flexibility and performance.
- Insulation Material Clarification: While the product specifications list "Rubber" as the insulation material, some user discussions mention "vinyl insulation" or inquire about "PTFE insulation". If the specific insulation type is critical for your application's temperature or chemical resistance, it is advisable to confirm with the supplier.
- Conductor Material: The wire uses copper as its conductor material, which is known for its excellent electrical conductivity.
- Overall Quality: Users frequently describe the product as "High quality and good value," indicating satisfaction with its performance and cost-effectiveness.
Warranty and Support
For detailed warranty information, specific product certifications, or technical support, please refer to the official product documentation provided by RiccoDi or contact the seller directly. A comprehensive user manual in PDF format, which includes general guidelines, is available for reference: