ZHRIVOER 6mm/8mm/10mm/12mm/14mm/16mm/19mm/22mm/25mm/30mm

Contents

ZHRIVOER Metal LED Indicator Light User Manual

Models: 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 19mm, 22mm, 25mm, 30mm

Brand: ZHRIVOER

1. Introduction

Thank you for choosing the ZHRIVOER Metal LED Indicator Light. This product is designed for reliable visual signaling in various applications, featuring a durable metal shell and an IP67 waterproof rating. This manual provides essential information for the safe and effective installation, operation, and maintenance of your indicator light.

Assortment of ZHRIVOER metal LED indicator lights in various colors and sizes.
Assortment of ZHRIVOER metal LED indicator lights in various colors and sizes.

2. Safety Information

Please read and understand all safety instructions before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.

  • Always disconnect power before installing or servicing the indicator light.
  • Ensure the selected voltage of the indicator light matches your power supply.
  • Installation should be performed by a qualified electrician if you are unsure about wiring procedures.
  • Do not exceed the specified current rating of 1A.
  • This product is designed for low voltage applications (below 50Vac or 75Vdc) unless a 110V/220V variant is specifically chosen and correctly wired.

3. Package Contents

Each package typically includes:

  • 1 x ZHRIVOER Metal LED Indicator Light (selected size and color)
  • Mounting nut and washer(s)

4. Specifications

FeatureDetail
Product NameMetal LED Indicator Light
BrandZHRIVOER
Mounting Diameter6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 19mm, 22mm, 25mm, 30mm
Lamp Voltage (Optional)3V, 5V, 6V, 12V, 24V, 36V, 48V, 110V, 220V
Illuminating ColorRed, Yellow, Green, Blue, White
Shell MaterialNickel Plated Brass
Wiring TypeScrew Type Terminal
Head ShapeFlat Head
Current Rating1A
Switch TypePush Button Switch (for models with switch functionality)
Waterproof RatingIP67
CertificationCE, CCC
EU LVD VoltageLow voltage: Below 50Vac or 75Vdc
Table detailing product specifications including mounting diameter, lamp voltage, illuminating color, shell material, wiring type, and head shape.
Product Information Overview
Dimensional drawing for 12mm and 16mm flat screw type metal indicator lights.
Product Dimensions: 12mm and 16mm Flat Screw Type
Dimensional drawing for 19mm and 22mm flat screw type metal indicator lights.
Product Dimensions: 19mm and 22mm Flat Screw Type
Dimensional drawing for 25mm and 30mm flat screw type metal indicator lights.
Product Dimensions: 25mm and 30mm Flat Screw Type

5. Installation

Follow these steps for proper installation:

  1. Prepare Mounting Hole: Drill a hole of the appropriate diameter (e.g., 12mm, 16mm, 19mm, 22mm, 25mm, or 30mm) in your panel or enclosure. Refer to the product dimensions for exact measurements.
  2. Insert Indicator Light: Insert the indicator light into the drilled hole from the front of the panel.
  3. Secure with Nut: Place the washer and then thread the mounting nut onto the indicator light from the back of the panel. Tighten securely, but do not overtighten.
  4. Wiring: Connect your power source and load to the screw terminals on the back of the indicator light. Ensure correct polarity for DC applications (LED + and LED -). For AC applications, polarity is generally not critical for the LED itself, but follow circuit requirements.
Wiring method diagram for 1NO switch, showing connection to load and power supply.
Wiring Diagram: 1NO (Normally Open) Configuration

Wiring Method 1 (1NO): Press the switch, LED lights are powered on together with the load. Connect the positive (+) of the power supply to one terminal of the LED and one terminal of the NO (Normally Open) contact. Connect the other terminal of the NO contact to the load. Connect the negative (-) of the power supply to the other terminal of the LED and the other side of the load.

Close-up view of the screw type terminals on the metal LED indicator light.
Screw Type Terminals for Wiring

6. Operation

Once correctly installed and wired, the LED indicator light will illuminate when power is supplied according to its intended function. If your model includes a push-button switch, pressing the button will activate or deactivate the connected circuit, and the LED will indicate its status.

Metal LED indicator lights illuminated in various colors: white, green, blue, yellow, and red.
Illuminated LED Indicator Lights

7. Maintenance

The ZHRIVOER Metal LED Indicator Light requires minimal maintenance due to its durable construction and IP67 rating.

  • Cleaning: Use a soft, damp cloth to wipe the surface of the indicator light. Avoid abrasive cleaners or solvents that could damage the metal finish or LED lens.
  • Inspection: Periodically check the wiring connections to ensure they remain secure.
  • Environmental Conditions: While splash-proof, avoid prolonged submersion or exposure to harsh chemicals unless specifically rated for such conditions.
Image highlighting the metal shell and splash-proof design of the indicator lights.
Durable Metal Shell and Splash-Proof Design

8. Troubleshooting

  • Light does not illuminate:
    • Check power supply: Ensure power is being supplied to the indicator light and that the voltage matches the light's rating.
    • Check wiring: Verify all connections are secure and correctly wired according to the diagram, paying attention to polarity for DC lights.
    • Inspect LED: Although rare, the LED might be faulty.
  • Light flickers or is dim:
    • Insufficient voltage or current: Ensure the power supply meets the light's requirements.
    • Loose connections: Tighten all screw terminals.

9. User Tips

  • Voltage Selection: Always double-check the required voltage for your application and select the corresponding indicator light model (e.g., 3-6V, 12-24V, 220V).
  • Wiring Clarity: For complex setups, label your wires to avoid confusion during installation and future maintenance.
  • Switch Functionality: Be aware that some models are purely indicator lights, while others incorporate a push-button switch with momentary or latching action. Confirm the specific functionality of your purchased model.

10. Frequently Asked Questions

Q: Is this an indicator light or a switch?
A: This product is primarily an LED indicator light. Some variants may also function as a push-button switch, with options for momentary or latching action. Please check your specific model's description and the wiring diagram for details.
Q: Can I use this with 220V?
A: Yes, models are available for various voltages, including 220V. It is crucial to select the correct voltage variant for your application to prevent damage.
Q: Can I use this with a 9V battery?
A: Yes, models with a 3-6V rating are available and can be used with a 9V battery, typically with an appropriate current-limiting resistor to ensure the LED operates within its safe voltage range.

11. Warranty

This ZHRIVOER product comes with a 2-year warranty from the date of purchase, covering manufacturing defects. The warranty does not cover damage caused by improper installation, misuse, unauthorized modifications, or normal wear and tear. Please retain your proof of purchase for warranty claims.

12. Support

For further assistance, technical support, or inquiries regarding your ZHRIVOER Metal LED Indicator Light, please contact the seller or refer to the official product documentation.

An additional user manual in PDF format is available for download: View User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.