Godox SL-60W Kit

Contents

Godox SL-60W Studio LED Continuous Photo Video Light Kit

Model: SL-60W Kit

Instruction Manual

Introduction

Thank you for purchasing this Godox product! The SL Series video lights are designed to provide stable and even illumination, making them excellent for product shooting, photojournalism, and video recording. This kit includes two models: the White Version (5600K) and the Yellow Version (3300K).

Key Features:

  • 60W LED bulbs ensure high light brightness.
  • High color rendering index (CRI >95, R9 >90) for authentic object color reproduction.
  • Wireless brightness adjustment.
  • Wireless 433MHz grouping system (6 groups & 16 channels).
  • Large-sized LCD panel with automatic settings saving.
  • Temperature control function to prevent overheating.
  • Specialized protective cover for LED beads.
  • Red copper heatsink and built-in fan for efficient heat dissipation.

What's in the Box

The Godox SL-60W Studio LED Continuous Photo Video Light Kit typically includes the following components:

  • 2x Godox SL-60W Video Light (White Version 5600K)
  • 2x Standard Reflector
  • 2x 5m Power Cable
  • 2x Godox 60x90cm Bowens Mount Softbox
  • 2x 180cm Light Stand
Contents of the Godox SL-60W kit, showing two SL-60W lights, two softboxes, two standard reflectors, two power cables, and two light stands.
Contents of the Godox SL-60W Studio LED Continuous Photo Video Light Kit.

Parts Identification

Familiarize yourself with the different parts of the SL-60W video light:

Diagram showing the labeled parts of the Godox SL-60W video light, including LED bead, protect cover, heatsink, accessory slot, mounting bracket, and direction adjusting handle.
Labeled parts of the Godox SL-60W Video Light.
  1. LED Beads
  2. Protect Cover
  3. Heatsink
  4. Accessory Slot
  5. ON/OFF Power Switch
  6. Select Dial + SET Button
  7. CH/GRP Button
  8. AC Power Jack
  9. LCD Panel (White in Blue)
  10. Mounting Bracket
  11. Umbrella Input
  12. Direction Adjusting Handle

Setup Instructions

1. Assembling the Light Stand

  • Unfold the light stand legs to their widest angle for maximum stability.
  • Extend the telescopic sections of the stand to the desired height (maximum 180cm), securing each section with the quick-release levers.
Diagram showing the dimensions of the 1.8m light stand, including folding height of 49cm and extended height of 180cm.
Dimensions of the 1.8m Light Stand.

2. Attaching the SL-60W Light

  • Mount the SL-60W video light onto the top stud of the light stand.
  • Secure the light by tightening the mounting bracket knob.
  • Adjust the direction of the light using the direction adjusting handle.

3. Installing the Softbox/Reflector

  • For the softbox, assemble it according to its specific instructions, ensuring the Bowens mount ring is correctly attached.
  • Attach the assembled softbox or the standard reflector to the Bowens mount on the front of the SL-60W light by aligning the pins and twisting until it locks into place.
Image of the Godox SL-60W light with a standard reflector mounted on a light stand.
Godox SL-60W light with standard reflector on a light stand.

4. Power Connection

  • Connect the 5m power cable to the AC Power Jack (08) on the back of the SL-60W light.
  • Plug the other end of the power cable into a suitable AC power outlet.

5. Initial Power On

  • Press the ON/OFF Power Switch (05) to turn on the video light.
  • The LCD panel (09) will display the current information.
Video demonstrating a live fill light solution setup using the Godox SL-60W kit.

Operating Instructions

Light Brightness Adjustment

  • Turn the Select Dial (06) on the main unit to adjust the light brightness.
  • The brightness can be adjusted from 10% to 100%.

Temperature Indication

  • The video light continuously monitors its temperature to prevent dangerous situations. It will automatically power off if the temperature becomes too high.
  • To switch the temperature display between Celsius and Fahrenheit, press and hold the SET button (06) for 2 seconds.

Wireless Remote Control (Sold Separately)

If you have a Godox wireless remote control, you can adjust settings remotely:

  • Channel and Group Matching: Ensure the remote control's channel and group settings match those of the video light.
  • Adjusting Channel/Group on Video Light:
    1. Press the CH/GRP button (07) once; the group ID (A-F) will blink. Turn the Select Dial (06) to choose the desired group.
    2. Press the CH/GRP button (07) twice; the channel icon (1-16) will blink. Turn the Select Dial (06) to choose the desired channel.
  • Adjusting Channel/Group on Remote Control:
    1. Press the CH/GRP button; the group icon (A-F) will blink. Use the "-" / "+" buttons to choose the desired group.
    2. Press the CH/GRP button twice; the channel icon (1-16) will blink. Use the "-" / "+" buttons to choose the desired channel.
  • Adjusting Brightness/Color Temperature with Remote Control:
    • Use the "-" / "+" buttons to adjust the light brightness.
    • Press the SET button once; the color temperature icon will blink. Use the "-" / "+" buttons to adjust the color temperature.
  • Turning Lights On/Off Remotely:
    • Press the ON/OFF button on the remote control to turn all video light groups on or off.
    • Press and hold the SET button on the remote control for 2 seconds to turn the current video light group on or off.
Image of a remote control for the Godox SL-60W, showing buttons for channel, group, brightness, and temperature adjustment.
Remote control for wireless light brightness and grouping system.

Maintenance

  • Do not place the product in high temperature or high humidity conditions.
  • Do not handle the product with wet hands, immerse it in water, or expose it to rain.
  • If the product will not be used for an extended period, remove any batteries from the remote control (if applicable).
  • Clean the exterior of the light with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.

Troubleshooting

Warning Indicators:

  • Fan Malfunction: If the cooling fan stops working due to a fault, the "!!" icon on the LCD panel will blink to indicate an alarm.
  • Overheating: If the heatsink temperature exceeds 70°C, the temperature display on the LCD panel will blink, and the video light will automatically stop working to prevent damage. It will resume operation once the temperature cools down.

General Safety Precautions:

  • Do not disassemble or modify this product. Unauthorized alterations can lead to malfunction or damage and will void the warranty.
  • Should the product break due to a fall or other accident, send the defective unit to an authorized service center for inspection and maintenance.

Specifications

Godox SL-60W Video Light

FeatureSpecification (White Version SL60W)Specification (Yellow Version SL60Y)
AC Power SupplyAC 100~240V 50/60HzAC 100~240V 50/60Hz
Channel1616
Group6 groups (A, B, C, D, E, F)6 groups (A, B, C, D, E, F)
PowerMax. 60WMax. 60W
Color Temperature5600K±300K3300K±300K
100% Illuminance (LUX)4100 (1m)4100 (1m)
100% Luminous Flux45004500
Color Rendering Index>95>95
R99090
TLCI(Qa)>90>90
Light Brightness Range10%~100%10%~100%
Operation Temperature-10~50°C-10~50°C
Safe Temperature≤70°C≤70°C
Dimension23x24x14cm (Not including the Lamp Cover)23x24x14cm (Not including the Lamp Cover)
Net WeightApprox. 1.61kgApprox. 1.61kg

Godox 60x90cm Bowens Mount Softbox

  • Brand: Godox
  • Color: Black, Silver, Translucent
  • Size: 60cm x 90cm
  • Weight: 0.95KG
  • Shape: Rectangular
  • Mount: Bowens mount

180cm Light Stand

  • Color: Black
  • Weight: 890g
  • Maximum Height: 180cm
  • Folded Height: 53cm
  • Material: Professional quality aluminum frame

Standard Reflector Honeycomb Grid

  • Material: Aluminum
  • Diameter: 6.7” (170mm)
  • Honeycomb Grid Size: 6mm

User Tips

  • Power Plug Compatibility: The product may come with a power cable designed for a specific region (e.g., American energy system) and include an adapter for other regions (e.g., European socket). Always verify the plug type upon receipt and ensure any adapters are securely attached and not easily lost or damaged during use.
Image showing different power plug types: US, EU, UK, AU.
Various power plug types for different regions.

Warranty and Support

Warranty Period

The warranty period for products and accessories is implemented according to the relevant Product Maintenance Information. The warranty period is calculated from the purchase date when the product is bought for the first time, and the purchase date is considered as the date registered on the warranty card when buying the product.

How to Get Maintenance Service

If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service. When applying for maintenance service, you should provide a valid warranty card. If you cannot provide a valid warranty card, service may still be offered if the product or accessory is confirmed to be within the maintenance scope, but this is not an obligation.

Inapplicable Cases for Warranty

The guarantee and service offered by this document are not applicable in the following cases:

  • The product or accessory has expired its warranty period.
  • Breakage or damage caused by inappropriate usage, maintenance, or preservation (e.g., improper packing, plugging in/out external equipment, falling off, squeezing, contact with improper temperature/solvents/liquids, etc.).
  • Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alteration, addition, and detachment.
  • The original identifying information of the product or accessory is modified, altered, or removed.
  • No valid warranty card.
  • Breakage or damage caused by using illegally authorized, non-standard, or non-public released software.
  • Breakage or damage caused by force majeure or accident.
  • Breakage or damage that could not be attributed to the product itself.

Normal discoloration, abrasion, and consumption are not considered breakage within the maintenance scope.

Maintenance and Service Support Information

Product TypeNameMaintenance Period (months)Warranty Service Type
PartsCircuit Board12Customer sends the product to designated site
Battery3Customer sends the product to designated site
Electrical parts (e.g., battery charger, power cord, sync cable, etc.)12Customer sends the product to designated site
Other ItemsFlash tube, modeling lamp, lamp body, lamp cover, locking device, package, etc.NoWithout warranty

Godox After-sale Service Call: 0755-29609320-8062

For a detailed user manual, please refer to the official PDF document: Godox SL-60W User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.