UXCELL Mirror Screws

Contents

Uxcell Mirror Screws Decorative Cap Cover Nails Instruction Manual

1. Introduction

Thank you for choosing Uxcell Mirror Screws. These decorative cap cover nails are designed to provide a clean and elegant finish for mounting mirrors, glass panels, and other decorative items. Crafted from solid brass, they are built to resist daily corrosion, scratches, and tarnishing, ensuring durability and longevity.

2. Package Contents

Your Uxcell Mirror Screws kit typically includes:

  • Decorative Caps (Polished Gold or Polished Stainless Steel)
  • Brass Cap Bases
  • Mounting Screws (Wood Screws)
  • Plastic Washers

Note: The quantity of components (2, 4, or 8 pieces) varies by the specific kit purchased.

3. Safety & Warnings

Warning: Keep the device and its components out of reach of children under 3 years old to prevent choking hazards.

Read all instructions before use to ensure safety and prevent damage.

4. Setup and Installation

Follow these steps for proper installation of your mirror screws:

  1. Inspect Components: Before use, check all screws for thread damage or bent shanks. Ensure all components are clean and free of debris.
  2. Prepare Mounting Surface: Drill appropriate pilot holes in your mounting surface (wood, wall with anchors, etc.) that match the diameter of the mounting screws.
  3. Assemble Base: Place a plastic washer onto the mounting screw, then insert the screw through the brass cap base.
  4. Mount Item: Align the item to be mounted (e.g., mirror, glass sign) over the pilot holes. Insert the assembled screw and base through the item's mounting hole.
  5. Fasten Securely: Fasten the screw evenly into the pilot hole using appropriate tools. Avoid over-tightening to prevent thread stripping or shank breakage. If mounting a heavy item, consider adding an additional washer for better load distribution.
  6. Attach Decorative Cap: Once the item is securely mounted, screw the decorative cap onto the threaded post of the brass cap base until snug.
Exploded view of Uxcell mirror screw components: wood screw, plastic washer, brass cap base, and decorative cap.
Figure 1: Exploded view of mirror screw components.
Example of mirror screws used to mount a glass panel on a wooden surface.
Figure 2: Example application on wood.
Example of mirror screws used to mount a glass panel on a wall.
Figure 3: Example application on a wall.

5. Maintenance

  • Cleaning: Wipe decorative caps with a soft, damp cloth to remove dust or smudges. Avoid abrasive cleaners that may damage the finish.
  • Rust Prevention: For carbon steel screws used in humid or outdoor environments, apply anti-rust oil periodically to prevent corrosion.
  • Storage: Store unused screws and components in a dry, well-ventilated area, separated by specifications to prevent damage or mix-ups.

6. Troubleshooting

  • Screw Not Holding: Ensure the pilot hole size is appropriate for the screw. If the hole is too large, use a larger screw or fill the hole and redrill.
  • Cap Not Fitting: Verify that the cap base is securely fastened and not cross-threaded. Ensure the decorative cap is aligned correctly before twisting.
  • Finish Tarnishing: For brass components, occasional polishing with a brass cleaner can restore luster. Ensure the cleaner is suitable for polished finishes.

7. Specifications

AttributeDetail
Brand NameUXCELL
Model NumberMirror Screws
MaterialBrass
FinishPolished Gold, Polished Stainless Steel
Screw TypeOther
Drive StyleNone
Head StyleNone
DimensionsM3*7 (Screw)
Cap Size (Diameter x Height)10/12/14/18/22/25mm x 5mm; 10/12/14/18/22/25mm x 6.8mm
Screw Size (Diameter x Length)4mm x 20mm; 3.5mm x 25mm
DIY SuppliesWoodworking
Package QuantityUnder 50Pcs
OriginMainland China
CertificationNONE
Dimensional diagram for 12mm cap mirror screw showing 4mm screw head, 5mm cap height, and 12mm cap diameter.
Figure 4: Example dimensions for 12mm cap.
Dimensional diagram for 18mm cap mirror screw showing 4mm screw head, 5mm cap height, and 18mm cap diameter.
Figure 5: Example dimensions for 18mm cap.

8. User Tips

  • Always double-check the product description for specific cap size, finish (e.g., glossy vs. matte), and shape (e.g., rounded vs. flat) to ensure it matches your aesthetic requirements.
  • Verify the dimensions of the screws and caps against your project needs before starting installation.
  • These screws are versatile and can be used in various woodworking projects, including mounting mirrors, tea tables, wardrobes, and glass signs.

9. Frequently Asked Questions (FAQ)

Q: What is the typical package quantity?
A: The package includes under 50 pieces, with specific kits offering 2, 4, or 8 pieces.
Q: Where can I use these screws?
A: These screws are widely used in various woodworking projects, including mirrors, tea tables, wardrobes, and glass signs.
Q: What are the dimensions of these screws?
A: The general dimensions for the screws are M3*7.

10. Warranty and Support

For any product-related inquiries, technical support, or warranty information, please contact your retailer or the manufacturer directly.

Manufacturer Information:

Manufacturer: Guangzhou Dajiali Network Technology Co., Ltd.
Address: B395, Room 106, Rulin Street, Tianhe, Guangzhou, China

EU Authorized Representative: SUCCESS COURIER SL
Address: CALLE RIO TORMESNUM.1, PLANTAI, DERECHAOFICINA 3Fuenlabrada, Madrid, 28947 Spain

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.