1. Introduction
This manual provides instructions for the ZHRIVOER Ultra Short Micro Stroke Stainless Steel Push Button Switches. These switches are designed for various applications, featuring a momentary (self-resetting) action, optional LED illumination, and a waterproof construction. They are available in multiple sizes and head shapes to suit diverse needs.
2. Safety Information
- Always disconnect power before installing or servicing the switch.
- Ensure the voltage and current ratings of the switch match your application requirements.
- Installation should be performed by a qualified professional if you are unsure about electrical wiring.
- Avoid exposing the switch to extreme temperatures or corrosive environments beyond its specified operating conditions.
3. Product Overview
The ZHRIVOER push button switches come in various configurations:
- Head Shapes: Flat head, High head
- LED Options: Without LED, Ring LED, Power Symbol + Ring LED
- Available Sizes (Installation Diameter): 12mm, 16mm, 19mm, 22mm, 25mm, 30mm
- LED Colors: Red, Yellow, Blue, Green, White
4. Installation and Setup
These switches feature a pin-type wiring connection for easy integration into your electrical circuits.
4.1. Mounting
Drill a mounting hole of the appropriate diameter for your chosen switch size (e.g., 12mm, 16mm, 19mm, 22mm, 25mm, 30mm). Secure the switch using the provided nut on the threaded body.
4.2. Dimensional Diagrams
Refer to the following diagrams for precise dimensions for each switch type and size:
4.3. Wiring Instructions
The switches utilize a pin-type connection. For models with an LED, ensure correct polarity when connecting the LED terminals to the power source. The LED voltage must match the specified range (3-6V or 12-24V).
Common Wiring Method (LED Always On):
- Connect the positive (+) terminal of your power supply to one of the LED terminals (e.g., LED+).
- Connect the negative (-) terminal of your power supply to the other LED terminal (e.g., LED-).
- Connect the device to be controlled between the power supply and the switch's NO (Normally Open) contact terminals.
- Connect the power supply's positive (+) to one side of the switch's NO contact.
- Connect the device's input to the other side of the switch's NO contact.
Note: Always verify the specific pinout for your switch model before wiring.
5. Operating Instructions
These are Momentary (Self-reset) push button switches. This means that when you press the button, the switch actuates, and when you release it, the button automatically returns to its original position, and the switch de-actuates.
For LED models, the LED will illuminate according to its wiring configuration (e.g., when the button is pressed, or always on if wired for continuous illumination).
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the switch surface. Avoid abrasive cleaners or solvents that could damage the stainless steel finish or plastic components.
- Inspection: Periodically check wiring connections to ensure they are secure.
- Waterproof Seal: While waterproof, avoid prolonged submersion or high-pressure water jets unless specifically rated for such conditions. Ensure the mounting nut is tightened to maintain the seal.
7. Troubleshooting
- Switch Not Responding:
- Check all wiring connections for looseness or incorrect placement.
- Verify that the power supply is active and providing the correct voltage.
- Ensure the switch's current rating is not exceeded by the connected device.
- LED Not Illuminating:
- Check LED wiring for correct polarity (+/-).
- Verify that the LED voltage matches the power supply voltage (3-6V or 12-24V).
- Inspect the LED for damage.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | ZHRIVOER |
| Item Type | SWITCHES (Push Button Switch) |
| Model Number | 12mm, 16mm, 19mm, 22mm (also available in 25mm, 30mm) |
| Features | Self-reset/Momentary, Ultra Short Micro Stroke, Waterproof |
| Shell Material | Stainless steel |
| Contact Form | 1NO (Normally Open) |
| Current Rating | 3A |
| LED Voltage Options | 3-6V, 12-24V |
| Operating Voltage (EU LVD) | Below 50Vac or 75Vdc |
| Is Smart Device | Yes |
| Certification | RoHS, CE, CCC |
| Origin | Mainland China |
9. Warranty and Support
This product comes with a 2-year warranty. For detailed warranty information, technical support, or further inquiries, please refer to the official user manual PDF or contact ZHRIVOER customer service.
You can view the comprehensive user manual (PDF) here.
10. User Tips
- Momentary Action: Remember that these switches are momentary. They only maintain their state (ON or OFF) while being actively pressed. If you require a switch that latches (stays ON or OFF after a single press), this product is not suitable.
- Voltage Matching: Always double-check the voltage requirements for the LED (3-6V or 12-24V) and the main switch circuit to prevent damage.
- Waterproofing: While designed to be waterproof, ensure proper installation and sealing to maintain its integrity, especially in outdoor or wet environments.