E-SIMPO PLS LED Horizontal Plug Lamp (H Series)

Contents

E-SIMPO PLS LED Horizontal Plug Lamp (H Series) User Manual

Model: PLS LED Horizontal Plug Lamp (H Series)

Brand: E-SIMPO

1. Product Overview

This PLS LED Horizontal Plug Lamp (H Series) is a patented LED replacement for traditional PL-S glass fluorescent tubes. It features a large-area aluminum alloy heatsink, high-efficiency SMD LEDs, and a long-life driver, delivering energy-saving, flicker-free, and environmentally friendly lighting. It directly replaces PL-S CFLs with G23 / GX23 / 2G7 / 2GX7 lamp bases, suitable for commercial, residential, and industrial lighting scenarios.

Various E-SIMPO PLS LED Horizontal Plug Lamps with different bases and wattages
Figure 1: E-SIMPO PLS LED Horizontal Plug Lamps (3W, 4W, 5W) with G23, GX23, 2G7, 2GX7 bases, 85-135V/195-265V input, and 180-degree beam angle.
Comparison chart showing LED wattage equivalent to CFL wattage
Figure 2: Wattage equivalence: 3W LED ≈ 7W CFL, 4W LED ≈ 8W CFL, 5W LED ≈ 9W CFL.

2. Specifications

Core Specifications

Model Power (W) LED Type Luminous Flux (lm) Length (mm) Width (mm) Replacement for CFL (W)
ELT-S033SMD2835300-35010727PLS-7W
ELT-S044SMD2835380-45013527PLS-7W
ELT-S055SMD2835450-55016527PLS-9W
ELT-S077SMD2835650-75018027PLS-10W
ELT-S7.57.5SMD2835700-80018027PLS-13W (110V)
ELT-S088SMD2835750-85023427PLS-11W

Electrical & Environmental Parameters

Parameter Specification
Input Voltage85-135V / 195-265V / 260-300V AC; 50-60Hz
Lamp BaseG23 / GX23 / 2G7 / 2GX7
CoverClear cover / Milky white cover (light diffuser)
Heatsink OptionsPlastic-aluminum heatsink / Aluminum alloy heatsink
Power Factor (PF)≥ 0.5 / ≥ 0.9
Color Rendering Index (CRI)RA ≥ 82
CertificationsCE, RoHS
Driver TypeLinear driver (dimmable version available)
Working Temperature-45°C ~ +55°C
Lifespan≥ 30,000 hours
Packaging50 pcs/ctn
Beam Angle180°
Waterproof LevelIP44
Dimensions of G23 3W and 4W LED bulbs
Figure 3: Dimensions for G23 3W (107mm/4.2") and G23 4W (135mm/5.3") LED bulbs, both 27mm/1.1" wide.
Dimensions of a 5W LED bulb
Figure 4: Dimensions for 5W LED bulb: 165mm/6.5" length, 27mm/1.1" width.
Image showing different lamp bases: G23, GX23, 2G7, 2GX7
Figure 5: Available lamp bases: G23, GX23, 2G7, 2GX7.

3. Features

  • Patented Design: Certified with two utility model patents.
  • Excellent Heat Dissipation: Large-area aluminum alloy heatsink ensures optimal light output control and long-term stability.
  • Direct Replacement: Same dimensions and lamp base as traditional PL-S fluorescent tubes, enabling plug-and-play replacement (note: electronic ballast must be bypassed).
  • Dual Heatsink Options: Available in plastic-aluminum or full aluminum alloy heatsink to meet different cost and performance needs.
  • High Safety: Flame-retardant PC cover, double insulation, and built-in surge/overload protection.
  • Superior Electrical Performance: High PF, low flicker, excellent EMC compatibility, and no high-frequency electromagnetic radiation.
  • Eco-Friendly: Lead-free, mercury-free, compliant with CE (LVD, EMC) and RoHS, with a dielectric strength of >3500V.
  • Wide Voltage Input: Supports 230V (185-265V) or 120V (90-140V) for global use.
  • High Luminous Efficacy: Up to 95 lm/W, using high-brightness, low-light-decay SMD LEDs.
Close-up view of the LED bulb highlighting its internal components and features
Figure 6: Key features include a built-in constant current LED driver with over-voltage, over-load, and short-circuit protection; high-quality aluminum heatsink for fast heat conduction; and large-chip, pure gold wire LEDs for high brightness and no dead light.
Certificates for CE and RoHS compliance
Figure 7: Product certifications including CE and RoHS.

4. Installation Instructions

Important Ballast Note

  • Inductance Ballast: Plug-and-play, no modification needed. However, if there are multiple CFLs in one fixture, please follow the 'Remove ballast steps' below.
  • Electronic Ballast: Must be bypassed (removed from the circuit) before installation. Failure to do so will cause flickering, burning, or permanent damage to the LED lamp.

Step-by-Step Installation

  1. Power Off: Turn off the power supply at the circuit breaker before installation to prevent electric shock.
  2. Remove Old CFL: Unscrew the existing PL-S fluorescent tube from the fixture.
  3. Bypass Electronic Ballast (if applicable):
    • Disconnect and remove the electronic ballast from the circuit.
    • Directly connect the live (L) and neutral (N) wires to the lamp holder terminals.
  4. Install LED Lamp: Align the lamp base (G23/GX23/2G7/2GX7) with the fixture socket and insert firmly.
  5. Test Operation: Restore power and switch on the light to verify normal illumination.
Wiring diagram for bypassing an electronic ballast
Figure 8: Wiring diagram illustrating how to bypass an electronic ballast for LED lamp installation. Ensure the electronic ballast is removed to prevent damage.

5. Operating Instructions

Once installed, the E-SIMPO PLS LED Horizontal Plug Lamp operates like any standard light bulb. Simply use the wall switch or fixture switch to turn the light on or off. If you have a dimmable version and a compatible dimmer switch, you can adjust the light intensity as needed.

Examples of LED bulb applications in various settings
Figure 9: The LED lamps are suitable for various applications, including desk lamps, ceiling lights, and general indoor lighting.

6. Maintenance

  • Ensure the power is off before cleaning the lamp.
  • Wipe the lamp with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Regularly check the lamp and fixture for any signs of damage or loose connections.

7. Troubleshooting

  • Lamp not turning on:
    • Check if the power supply is on at the circuit breaker.
    • Ensure the lamp is correctly inserted into the fixture socket.
    • Verify that the electronic ballast has been properly bypassed (if applicable).
    • Test the fixture with another working bulb to rule out fixture issues.
  • Flickering or inconsistent light:
    • This often indicates an electronic ballast that has not been bypassed. Ensure it is removed from the circuit.
    • Check for loose connections in the wiring.
    • Ensure the input voltage is within the specified range (85-135V or 195-265V AC).
  • Lamp burning out quickly:
    • Ensure the lamp is not exposed to excessive heat or moisture.
    • Verify that the rated voltage and power of the lamp are not exceeded.

8. Safety Precautions

  • Do not install or handle the lamp while the power is on.
  • Do not exceed the rated voltage and power of the lamp.
  • Avoid exposing the lamp to moisture, corrosive gases, or direct sunlight for extended periods.
  • If the lamp shows signs of damage (cracking, discoloration, flickering), discontinue use immediately and replace it.
  • Keep the lamp out of reach of children.
  • Installation must be performed by a qualified electrician.

9. User Tips

  • Always double-check the lamp base type (G23, GX23, 2G7, 2GX7) before purchasing to ensure compatibility with your fixture.
  • For optimal performance and longevity, ensure proper ballast bypass for electronic ballasts during installation.
  • Consider the color temperature (Warm White 3000K, Natural White 4000K, Cold White 6000K) to match your desired ambiance.
  • Users have reported that the product fits perfectly and is exactly as described, indicating good compatibility and quality.

10. Warranty and Support

This product is backed by a 1-year manufacturer warranty against manufacturing defects from the date of purchase. For warranty claims, please contact our sales team with proof of purchase and product details.

For further assistance or inquiries, please refer to the official user manual PDF available at: User manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.