E-SIMPO SR-Z1061

Contents

User Manual: B22 to E27/E26 Lamp Holder Adapter

Model: SR-Z1061 | Brand: E-SIMPO

1. Introduction

This manual provides instructions for the safe and effective use of your E-SIMPO B22 to E27/E26 Lamp Holder Adapter (Model SR-Z1061). This adapter is designed to convert a B22 bayonet socket into a standard E26/E27 screw socket, enabling the use of E26/E27 base bulbs in B22 fixtures. Please read this manual thoroughly before installation and use.

B22 to E27/E26 Lamp Holder Adapter
Image: E-SIMPO B22 to E27/E26 Lamp Holder Adapter, showing both B22 bayonet and E27 screw ends.

2. Safety Warnings

Failure to follow these safety warnings may result in electric shock, fire, or personal injury.

  • **Electrical Safety:** For indoor dry use only. Do not use in damp, wet, or outdoor places.
  • **Power Limit:** Do not use bulbs exceeding the rated power of 60W to avoid fire risk and overheating.
  • **Operation Safety:** Do not touch the adapter or bulb during operation, as high temperatures may cause burns.
  • **Usage Restriction:** Do not disassemble, modify, or forcibly bend the product.
  • **Fire Prevention:** Keep away from flammable materials such as fabric, paper, and plastic.
  • Always turn off the power supply completely before installation or maintenance to prevent electric shock.

3. Specifications

The following table details the technical specifications of the lamp holder adapter:

Parameter Specification
Product Name B22 to E27 Lamp Holder Adapter
Model Number SR-Z1061
Item Type Lamp Holder Converter
Input Type (Male Side) B22 Bayonet base
Output Type (Female Side) E26/E27 Screw holder
Material PBT (Flame retardant plastic) / High temperature resistant ceramic (depending on actual version)
Conductive Part Copper alloy, high conductivity, anti-oxidation
Rated Voltage AC 100-240V
Rated Current ≤ 2A
Max. Compatible Power ≤ 60W
Working Temperature -20°C ~ 180°C
Protection Class IP20
Flame Retardant Grade V-0 level (high safety)
Application Environment Indoor dry place only
Dimensional drawing of the B22 to E27 adapter
Image: Dimensional drawing showing the adapter's measurements (e.g., Ø22, 61.5mm height, Ø36.5mm base, Ø33.3mm E27 opening).

4. Installation Steps

Follow these steps to install the lamp holder adapter:

  1. **Turn off Power:** Completely turn off the power supply to the lamp fixture before beginning installation to prevent electric shock.
  2. **Insert Adapter:** Align the B22 bayonet end of the adapter with the lamp holder socket. Insert it and twist clockwise to lock it securely in place.
  3. **Install Bulb:** Screw an E27 or E26 bulb clockwise into the E27/E26 screw holder side of the adapter until it is firmly fixed.
  4. **Restore Power:** Turn on the power supply and check if the bulb lights up normally.
  5. **Power Limit Reminder:** Do not use bulbs exceeding the rated power of 60W to avoid overheating.
Adapter installed with a light bulb
Image: The B22 to E27/E26 adapter shown with an E27 bulb screwed into it, ready for installation into a B22 fixture.
Adapter and bulb installed in a ceiling fixture
Image: The adapter and an E27 bulb successfully installed into a B22 ceiling lamp fixture.

5. Operation

Once installed, the adapter functions as a pass-through for electrical current, allowing your E26/E27 bulb to operate in a B22 socket. No special operation is required beyond the normal use of your light fixture and bulb.

6. Maintenance & Storage

  • **Cleaning:** Turn off power and allow the bulb and adapter to cool down fully. Wipe with a dry cloth only. Do not use liquids or abrasive cleaners.
  • **Inspection:** Regularly check the adapter for any signs of cracks, deformation, or poor contact.
  • **Storage:** Store the adapter in a dry, cool, and dust-free environment when not in use.
  • **Replacement:** Stop using the product immediately if it is cracked, damaged, or shows any signs of malfunction.

7. Troubleshooting

If you encounter any issues with your lamp holder adapter, refer to the table below:

Fault Phenomenon Possible Cause Solution
Bulb not lighting Loose installation or power failure Reinstall the adapter and bulb; check power supply.
Flickering Poor contact or oxidized pins Clean contacts and reinstall tightly.
Overheating Overload bulb or improper connection Use bulb ≤60W; ensure firm installation.

8. User Tips

  • Ensure the adapter is fully seated and twisted into the B22 socket for a secure connection.
  • When screwing in the E26/E27 bulb, make sure it's snug but do not overtighten to avoid damage to the adapter or bulb.
  • Always verify the wattage of your E26/E27 bulb does not exceed 60W to prevent overheating and potential hazards.

9. Warranty and Support

For warranty information, technical support, or further assistance, please contact the seller or manufacturer directly. Refer to the original product packaging or purchase documentation for specific contact details.

A detailed user manual in PDF format is also available for download: View User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.