1. Introduction
Thank you for purchasing the KuWFi Waterproof Outdoor 4G WiFi Router. This device provides high-speed internet access via a 4G SIM card, or can operate in Gateway mode using PPPoE if a 4G SIM card is not available. It is designed for both indoor and outdoor use, offering reliable internet connectivity for various applications, including IP cameras and general outdoor Wi-Fi coverage.
This manual provides detailed instructions for setting up, operating, and troubleshooting your router to ensure optimal performance.
2. Package Contents
Please check the box for the following items:
- KuWFi Outdoor 4G LTE WiFi Router
- 2x Detachable Antennas (1x 4G Antenna, 1x 2.4GHz WiFi Antenna)
- Power Adapter (DC 12V-1A)
- Ethernet Cable
- Mounting Accessories (e.g., cable ties, wall mount bracket)
- Quick Installation Guide

3. Product Overview
3.1. Device Layout

The router features the following ports and indicators:
- DC 12V-1A: Power input port.
- Micro USB port: For alternative power input (e.g., from a power bank).
- SIM Slot: Insert your Micro 4G SIM card here.
- WAN/LAN Port: Ethernet port for wired connections. Can function as WAN (for internet input) or LAN (for connecting devices).
- RESET Button: Used to restore factory default settings.
3.2. LED Indicators

The LED indicators provide status information:
- Power Light: Indicates power status.
- WiFi Light: Indicates Wi-Fi activity.
- WAN/LAN Light: Indicates activity on the Ethernet port.
- WiFi Signal: Indicates Wi-Fi signal strength.
- 4G Signal: Indicates 4G signal strength.
3.3. Key Features
- Waterproof (IP65 rated) for indoor and outdoor use.
- Supports 4G LTE CAT4 with speeds up to 150Mbps download and 50Mbps upload.
- 2.4GHz Wi-Fi with speeds up to 300Mbps.
- High-gain detachable Wi-Fi and 4G antennas.
- Supports 4G to Wi-Fi and 4G to Wired connections.
- Can support 10+ concurrent users.
4. Setup Instructions
Follow these steps to set up your KuWFi 4G WiFi Router:
4.1. Mount Antennas
Unpack the product and mount the two detachable antennas onto the designated ports. Ensure the antenna labeled 'WiFi' is connected to the Wi-Fi antenna port and the antenna labeled '4G' is connected to the 4G antenna port.

4.2. Insert SIM Card
- Open the protective cover at the bottom of the router.
- Locate the SIM card slot.
- Insert a Micro 4G SIM card into the slot as shown in Figure 3.1. Ensure the SIM card is correctly oriented.
- Close the protective cover.
Important: Please insert the SIM card first, and then connect the product to the power supply.
4.3. Power On
Connect the provided power adapter to the DC 12V-1A port on the router and plug it into a power outlet. The Power Light LED should illuminate.
4.4. Initial Wi-Fi Connection
Once powered on, the router will broadcast a Wi-Fi network (SSID). The default SSID and password are typically printed on a label on the device itself. The default password is often 1234567890.
- On your computer or mobile device, search for available Wi-Fi networks.
- Select the router's SSID (e.g.,
4G-CPE_XXXXorHXFXXXX). - Enter the default Wi-Fi password (
1234567890) to connect.

5. Operating Instructions
5.1. Accessing the Web Management Interface
To configure advanced settings, access the router's web management interface:
- Ensure your device is connected to the router's Wi-Fi network or via an Ethernet cable.
- Open a web browser (e.g., Chrome, Firefox).
- In the address bar, type
192.168.199.1and press Enter. - You will be prompted for a username and password. The default credentials are usually
adminfor both username and password.
5.2. Configuring APN Settings
If you cannot connect to the internet after inserting the SIM card, you may need to configure the APN settings:
- Log in to the web management interface.
- Navigate to Settings > Network Settings > APN.
- Click on Add New.
- Fill in the following details provided by your mobile network operator:
- Profile Name: (e.g., your operator's name)
- APN: (Access Point Name)
- MCC: (Mobile Country Code)
- MNC: (Mobile Network Code)
- Authentication: (PAP/CHAP, usually Auto)
- User Name: (if required by your operator)
- Password: (if required by your operator)
- Click Apply to save the settings.
5.3. Network Selection
To improve signal stability or performance, you can manually select the network type:
- Log in to the web management interface.
- Navigate to Settings > Network Selection.
- Choose your preferred network mode (e.g., 4G Only, 3G Only, or Auto).
- Click Apply.
5.4. Changing Wi-Fi SSID and Password
It is recommended to change the default Wi-Fi network name (SSID) and password for security:
- Log in to the web management interface.
- Navigate to Settings > Wi-Fi Settings.
- Modify the SSID and Wi-Fi password as desired.
- Click Apply.
5.5. Ethernet Connection Modes
The WAN/LAN port can be configured for different connection types:
- Log in to the web management interface.
- Navigate to Settings > Ethernet Settings.
- Select the desired connection type:
- DHCP: Automatically obtains an IP address from an upstream router/modem.
- Static IP: Manually assign an IP address, subnet mask, gateway, and DNS servers.
- PPPoE: For internet connections requiring PPPoE authentication (e.g., DSL).
- Click Apply.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | KuWFi |
| Type | Wireless, With Modem Function |
| Application | Outdoor |
| Max. LAN Data Rate | 150Mbps |
| Wired Transfer Rate | 10/100Mbps |
| WAN Ports | 1 x 10/100Mbps |
| LAN Ports | 1 |
| Wi-Fi Transmission Standard | 802.11n |
| Wi-Fi Supported Frequency | 2.4G |
| 2.4G Wi-Fi Transmission Rate | 300 Mbps |
| Wireless transmission rate | 300m |
| Frequency Band Class | Single-Band |
| CAT4 4G Download Rate | Up to 150Mbps |
| CAT4 4G Upload Rate | Up to 50Mbps |
| Antennas | 2x Detachable Antennas (1x 4G, 1x 2.4GHz WiFi) |
| Supports WPS | No |
| Supports WDS | No |
| Support Mesh | Not Supported |
| Function | Firewall |
| Certification | CE |
7. Troubleshooting
If you encounter issues with your KuWFi router, refer to the following common problems and solutions:
7.1. No Internet Access After SIM Card Insertion
- Check SIM Card: Ensure the Micro 4G SIM card is correctly inserted and active.
- APN Settings: Verify that the APN settings are correctly configured in the web management interface (see Section 5.2). These settings are specific to your mobile operator.
- SIM Card PIN: If your SIM card has a PIN code enabled, disable it using a mobile phone before inserting it into the router.
- Frequency Band Compatibility: Confirm that your SIM card's frequency band is compatible with the router model you have. Different models (e.g., EU, AS versions) support different bands.
- Signal Strength: Check the 4G signal strength LED indicators. If the signal is weak, try repositioning the router or consider an external antenna.
7.2. Unstable or Slow Internet Connection
- Network Selection: In the web management interface, try setting the network mode to '4G Only' (see Section 5.3) if 4G coverage is available, to prevent the router from switching to weaker 2G/3G networks.
- Signal Strength: Weak 4G signal can lead to slow speeds. Ensure the router is placed in an area with good signal reception.
- Operator Throttling: Some mobile operators may detect if a phone SIM card is used in a router and throttle speeds. Consider using a SIM card with a data plan specifically for modems/routers if available.
- External Antennas: For areas with poor signal, connecting a high-gain external 4G antenna can significantly improve reception and speed.
7.3. Cannot Access Web Management Interface
- IP Address: Ensure you are using the correct IP address (
192.168.199.1). - Network Connection: Verify your device is connected to the router's Wi-Fi or via Ethernet.
- Browser Cache: Clear your browser's cache and cookies, or try a different browser.
- Firewall/Antivirus: Temporarily disable any firewall or antivirus software on your computer that might be blocking access.
- Reset Router: If all else fails, perform a factory reset by pressing and holding the RESET button for about 10 seconds. This will revert all settings to default, including the login credentials and Wi-Fi password.
7.4. Wi-Fi Range Issues
- Obstructions: Walls, metal objects, and other electronic devices can interfere with Wi-Fi signals. Position the router in a central location with minimal obstructions.
- Antenna Orientation: Ensure the Wi-Fi antenna is oriented for optimal coverage.
- Range: The Wi-Fi range can be up to 150 meters in direct line of sight without obstacles, but significantly less with obstructions.
8. User Tips
- SIM Card Type: Use a Micro SIM card. Some users report better compatibility with SIM cards intended for modems rather than smartphones, as operators may throttle phone SIMs used in routers.
- External Antennas: For improved 4G signal reception, especially in rural areas or locations with weak coverage, consider investing in a good external 4G antenna. The router uses SMA connectors for antennas.
- Power Options: The router can be powered via the included 12V-1A DC adapter or potentially via the Micro USB port, allowing for power bank use if the power bank provides 12V.
- Wi-Fi Password: The default Wi-Fi password is typically
1234567890and is often printed on the device. - Changing IP Address: To change the router's IP address, first disconnect from the internet in the web interface, then modify the IP settings, and finally reconnect.
- Durability: The router is designed for outdoor use and is reported by users to be durable, with some units functioning reliably for several years.
- Device Capacity: The router can handle multiple connected devices, with some users reporting successful connections for up to 10 devices.
9. Maintenance
- Cleaning: Use a soft, dry cloth to clean the router. Do not use liquid or aerosol cleaners.
- Firmware Updates: Periodically check the manufacturer's website (www.kuwfi.com) for firmware updates to ensure optimal performance and security.
- Environmental Conditions: While designed for outdoor use (IP65), extreme temperatures (e.g., below -20°C) or prolonged direct exposure to harsh UV radiation might affect the device's longevity.
10. Warranty and Support
For technical support, warranty information, or any questions not covered in this manual, please contact KuWFi customer service:
- Website: www.kuwfi.com
- Email: amazon1@kuwfi.com
Please have your product model and purchase information ready when contacting support.