Important Safety Information and Precautions
Thank you for choosing the Yovanxer ALR PET Crystal Fixed Frame Projection Screen. For optimal use and longevity of your product, please read and keep this manual carefully before installation and use.
- Every screen undergoes special quality checks. The manufacturer records a video of each screen produced in the factory to document its condition as it leaves. We recommend that you also record a video for documentation when unpacking the screen. This will facilitate processing any service requests.
- Damage that occurs during installation cannot be claimed. The screen material is very fragile; avoid folding, denting, or applying excessive force.
- Handle all components with care during installation to prevent personal injury or product damage.
- Do not touch the surface of the projection screen with your bare hands or with sharp/hard objects to prevent damage. Do not write or draw on the screen.
- Keep children away from the screen to prevent accidents.
- For ultra-short throw ambient light rejecting screens, it is highly recommended to have two people for assembly to prevent damage.
1.0 Setup Guide
1.1 Package Contents (Parts List)
Before beginning assembly, please verify that all parts listed below are present and undamaged. Refer to the included user manual PDF for detailed diagrams: View User Manual (PDF)
| Part | Quantity |
|---|---|
| Inner frame | 6 |
| Outside frame | 6 |
| Corner connectors (Type 1) | 4 |
| Corner connectors (Type 2) | 4 |
| Corner protectors | 4 |
| Screen | 1 |
| Fiberglass strip | 6 |
| Support rod | 1 |
| 4mm hexagon wrench | 1 |
| Pull hook | 1 |
| Tension spring | N (varies by screen size) |
| Upper wall bracket | 2 |
| Under wall bracket | 2 |
| M5*5 pan head screws | 16 |
| Gloves | 2 |
| User's manual | 1 |
| Wall bracket screws | 8 |
| M4*8 screws | 16 |
| Level ruler | 1 |
1.2 Frame Assembly
Prepare a clean, flat surface (floor or table) covered with a soft cloth or blanket to prevent damage to components.
- Unpack and categorize all components, cross-referencing with the parts list.
- The horizontal inner frames are segmented. Splice them together, ensuring the mark in the middle of the splicing strip aligns.
- Insert the four corner connectors into the vertical inner frame sections.
- Assemble the horizontal and vertical inner frame sections according to the diagram.
- Once the inner frame is assembled, secure the corners with M5x5 screws.
- Install the support rods, ensuring they are perpendicular to the middle of the frame.

Figure 1.2.1: Frame Assembly Diagram - Shows how to connect frame sections and secure corners with screws. Tips: Put all screws on first, align them, then tighten one by one.
1.3 Screen Material Assembly
- Wear the provided gloves to avoid leaving fingerprints on the screen material.
- Carefully remove the screen material from its packaging. Lay it face down on your prepared clean, flat surface.
- Unroll the screen material completely and spread it flat.
- Insert the fiberglass strips into the channels around the perimeter of the screen material. Ensure the strips extend out the same length at both ends.
- Carefully place the assembled inner frame onto the screen material. Note: The ALR (Ambient Light Rejecting) screen has a specific up-and-down direction. Ensure the 'UP' marking on the back of the screen aligns with the top of the frame. Adjust the screen's position according to the alignment marks on the frame's corners.
- Using the pull hook, attach the tension springs to hook the screen material to the inner frame. Follow this sequence: first, hook springs 1-8; then hook springs 9-12; finally, hook the remaining springs from the middle outwards to both sides.
- After all springs are attached, stand the screen up and check for overall flatness. If there are any uneven areas, adjust the tension of the springs locally until the screen is perfectly flat.

Figure 1.3.1: Screen Attachment Diagram - Illustrates how to insert fiberglass strips and attach the screen to the inner frame using tension springs.
1.4 Outside Frame Installation
- Carefully place the outside frame sections against the assembled screen and inner frame. Align the four corners precisely.
- Secure the inner and outer frames together using the M4x8 screws. If there is a brand logo on the outside frame, ensure it is positioned at the bottom of the screen.
- Adjust the outside frame at each corner to minimize any gaps, then tighten the screws. Work your way around, securing each corner. If any gaps are too large in the horizontal sections, gently push the left and right outer frames inward.
- Finally, install the corner protectors onto the four corners of the assembled frame.
1.5 Wall Mounting
- Identify the upper and under wall brackets and their correct installation direction.
- Determine the mounting location on your wall. Use a level ruler, pencil, and measuring tape. The horizontal distance from the screen's sides to the wall brackets should be approximately 30cm. The recommended height for the lower edge of the screen from the floor is generally between 600mm and 800mm.
- Drill holes and install the wall brackets using the provided wall bracket screws. Ensure they are securely fastened and level.
- To hang the screen: First, buckle the top edge of the screen into the upper wall brackets from top to bottom.
- Push the screen forward towards the wall, then lift it slightly to insert the bottom edge into the lower wall brackets, compressing the spring mechanism. Ensure the screen is securely seated.

Figure 1.5.1: Wall Mounting Diagram - Shows recommended wall bracket placement and the process of hanging the screen.
2.0 Operating Instructions
Your Yovanxer ALR PET Crystal Fixed Frame Projection Screen is designed to provide an exceptional viewing experience, especially with Ultra Short Throw (UST) projectors.
- Compatibility: This screen is specifically designed for use with all types of Ultra Short Throw (UST) projectors.
- Viewing Experience: The screen supports 3D, 4K, and 8K content, offering a wide 170-degree viewing angle.
- Ambient Light Rejection (ALR): The PET Crystal material is engineered to reject ambient light, providing a vibrant and clear image even in well-lit rooms.
- Optional LED Backlight: The frame is designed to accommodate an optional LED backlight for enhanced aesthetics and bias lighting.

Figure 2.0.1: Yovanxer Projection Screen in Use - Demonstrates the screen displaying high-quality content.

Figure 2.0.2: UST Projector Compatibility - Illustrates various Ultra Short Throw projectors compatible with this screen, including LG-PF1000UG, ENC U321H+, Ailowi V8, JMGO S1 PRO, JMGO SC, ViewSonic LS820, Hisense Laser TV, JMGO S1, Xiaomi Laser Projection TV, Sony Laser TV, BenQ i955L, BenQ 950L.
Video 2.0.1: Projection Test - A demonstration showing the screen's performance during daytime with lights on, windows open, and sunshine, comparing it against white, grey, dark grey, and silver screens.
3.0 Maintenance
To ensure the best performance and longevity of your projection screen, follow these maintenance guidelines:
- Cleaning: The surface of the screen should be cleaned regularly, ideally once every two weeks. Use a soft cotton cloth, slightly dampened with water, to gently wipe the screen.
- Avoid Chemicals: Do not use any chemical cleaners, solvents, or abrasive materials on the screen surface, as this can cause permanent damage.
- Handling: Always handle the screen with care. Avoid touching the screen surface directly with your fingers, especially after installation.
4.0 Troubleshooting
- Uneven Screen Surface After Assembly: If the screen appears uneven or wavy after attaching all tension springs, gently adjust the tension of individual springs. Loosen or tighten springs in specific areas until the screen surface is perfectly flat.
- Visible Vertical Streaks: Some users have reported vertical streaks, possibly from tight rolling during packaging. Ensure the screen is unrolled carefully and allowed to relax before final tensioning. If streaks persist after proper installation and relaxation, contact customer support.
- Suboptimal Image Quality: Ensure your Ultra Short Throw (UST) projector is correctly positioned and aligned with the screen. Verify that the screen's 'UP' direction is correctly oriented. Minimize direct light sources hitting the screen surface, even though it is an ALR screen.
- Difficulty During Assembly: If you encounter difficulties, especially with screen material handling, remember that two people are recommended for assembly of ALR screens. Refer to the detailed diagrams in the user manual PDF.
5.0 Specifications
| Feature | Specification |
|---|---|
| Model Number | DQ-FSBSP060-130 |
| Material | PET Crystal |
| Screen Type | Frame Screen |
| Type | ALR UST projector Screen / CLR UST projector Screen |
| Format | 16:9 |
| Gain | 0.8 |
| Size Options | 80-120 inches, 130 inch max |
| 3D/4K/8K Support | Supported |
| Style | Ultra-thin border Fixed Frame |
| Suitable for | All kinds of Ultra Short Throw Projectors |
| Viewing Angle | 170 degrees |
| Mount Type | Wall Mount |
| LED Backlight | Optional |
| Portable | No |
| Certification | CE |
| Warranty | 2 Years |
| Package Length | 120 cm |
| Package Width | 24 cm |
| Package Height | 14 cm |
| Package Weight | 16.5 kg |
6.0 User Tips
- Easy Assembly: Many users find the screen straightforward to assemble. Follow the instructions carefully, and consider having a second person for assistance, especially when handling the screen material.
- Daytime Viewing: The Ambient Light Rejecting (ALR) technology significantly enhances picture quality, making it excellent even during the day with curtains open. The difference compared to a white wall is often described as 'night and day'.
- Unboxing Care: While packaging is generally secure, always inspect the box upon arrival. When unboxing, handle the screen material with extreme care to prevent any stress marks or damage.
- Enhanced Experience: This screen significantly enhances the viewing experience for TV, movies, and 3D content, providing a vibrant and immersive picture.
7.0 Warranty and Support
7.1 Product Warranty
This Yovanxer ALR PET Crystal Fixed Frame Projection Screen comes with a 2-year warranty from the date of purchase. The warranty covers manufacturing defects under normal use. Damage resulting from improper installation, misuse, accidents, or unauthorized modifications is not covered.
7.2 Customer Support
For any questions, technical assistance, or warranty claims, please contact Yovanxer customer support:
- Service Hotline: 008618621934178
- Email: sales@dqprojection.com
Please have your product model number (DQ-FSBSP060-130) and purchase details ready when contacting support.