1. Product Overview
The diymore Lithium Battery Capacity Indicator is a compact voltmeter designed to display the real-time charge level of 1S to 7S lithium battery packs. It features a green LED bar display with a red outline, providing a clear visual representation of battery capacity.

Figure 1: Front and Back View of the Indicator Module
2. Setup Instructions
Follow these steps to correctly connect your Lithium Battery Capacity Indicator:
- Identify the positive (+) and negative (-) terminals on the indicator board. These are typically marked on the PCB.
- Connect the positive (+) terminal of the indicator board to the positive (+) terminal of the battery pack you wish to monitor.
- Connect the negative (-) terminal of the indicator board to the negative (-) terminal of the battery pack.
- Ensure all connections are secure and correct polarity is observed to prevent damage to the indicator or battery.

Figure 2: Indicator Module with Connection Terminals
3. Operating Instructions
Once connected, the indicator will automatically display the battery's charge level. The display features a red outline and green illuminated blocks.
3.1 Display Interpretation
The number of illuminated green blocks corresponds to the battery voltage, where 'N' represents the number of cells in the battery pack (e.g., 1S, 2S, 3S, etc.):
- 1 Block Illuminated: Battery voltage is over N * 3.3V.
- 2 Blocks Illuminated: Battery voltage is over N * 3.5V.
- 3 Blocks Illuminated: Battery voltage is over N * 3.7V.
- 4 Blocks Illuminated: Battery voltage is over N * 3.9V.
- All 4 Blocks Off: Battery voltage is less than N * 3.3V. This indicates the battery is low and requires charging.

Figure 3: Indicator Displaying Full Charge (4 Blocks)
3.2 Operational Video
Video 1: Demonstration of the Battery Capacity Indicator in operation.
4. Maintenance
This device requires minimal maintenance. Keep the module clean and dry. Avoid exposing it to extreme temperatures, humidity, or corrosive substances. Do not attempt to open or modify the device, as this may void any implied warranty and could damage the unit.
5. Troubleshooting
- No Display:
- Check if the positive and negative connections are correctly made and secure.
- Verify that the battery pack has sufficient voltage (above the minimum threshold for 1 block).
- Ensure the battery pack itself is functional.
- Incorrect Reading:
- Confirm that the indicator is compatible with your battery's cell count (1S-7S).
- Ensure the battery is not under heavy load during measurement, which can temporarily drop voltage readings.
- All Blocks Off: This is normal when the battery voltage is below N * 3.3V. Charge your battery.
6. Specifications
| Feature | Specification |
|---|---|
| Brand | diymore |
| Model Number | Digital Voltmeter |
| DIY Supplies | Electrical |
| Accuracy Class | 1S/2S/3S/4S/6S/7S (for Lithium Battery Packs) |
| Power Supply | DC |
| Display Type | Analog Only (Segmented LED) |
| Display Color | Outline: Red, Blocks: Green |
| Certification | CE |
| Battery Included | No |
| Dimensions (L x H x T) | 45mm x 20mm x 8mm (approx.) |

Figure 4: Product Dimensions
7. User Tips
- Always double-check polarity before connecting the indicator to your battery to prevent damage.
- For accurate readings, connect the indicator when the battery is not under heavy discharge or charge.
- If the display is consistently off, it's a strong indication that the battery needs immediate charging.
8. Warranty and Support
No specific warranty information is provided for this product. For technical support or further inquiries, please contact your retailer or the manufacturer.
For additional detailed instructions and diagrams, you may refer to the official user manual PDF available at: Lithium Battery Capacity Indicator User Manual (PDF).