MotoLovee Z2509

Contents

MotoLovee CNC Aluminum Motorcycle Kickstand

Model: Z2509

Brand: MotoLovee

1. Product Overview

This manual provides basic guidelines for the installation, use, and maintenance of the MotoLovee CNC Aluminum Motorcycle Kickstand. This accessory is designed to provide stable support for your motorcycle when parked. Made from high-quality CNC Aluminum, it offers durability and a precise fit for compatible motorcycle models.

MotoLovee CNC Motorcycle Kickstand, silver with blue accents
The MotoLovee CNC Aluminum Motorcycle Kickstand.

2. Safety Warnings

  • Read and Understand: Before using this kickstand, carefully read this manual and any specific instructions provided with your motorcycle or the kickstand itself.
  • Professional Installation: Unless you possess the appropriate skills and tools, it is highly recommended that a professional technician performs the installation to ensure safety and proper function.
  • Compatibility: Ensure that the kickstand is compatible with your specific motorcycle model, year, and specifications (e.g., Honda Grom MSX125). Using an incompatible kickstand can lead to instability and potential damage.
  • Personal Protection: Wear appropriate protective equipment, such as gloves and eye protection, during installation or replacement of the kickstand.
  • Comply with Regulations: Ensure that the kickstand complies with all local traffic regulations and safety standards.

3. Specifications

Feature Detail
Brand Name MotoLovee
Model Name Z2509
Item Type Stands
Material CNC Aluminum (T6 6061)
Item Length 25 cm
Fitment For Honda Grom MSX125
Package Length 28 cm
Package Width 9 cm
Package Height 4 cm
Package Weight 0.388 kg

4. Setup and Installation

The MotoLovee CNC Aluminum Motorcycle Kickstand is designed for direct bolt-on installation without the need for modifications on compatible models. However, professional installation is recommended to ensure correct and secure fitting.

Installation Steps:

  1. Preparation: Ensure your motorcycle is on a stable, level surface, preferably using a center stand or a paddock stand for safety. Gather any necessary tools.
  2. Remove Old Kickstand (if applicable): Carefully unbolt and remove the existing kickstand from your motorcycle. Keep track of all hardware.
  3. Position New Kickstand: Align the new MotoLovee kickstand with the mounting points on your motorcycle.
  4. Secure with Bolts: Use the appropriate bolts (e.g., M10 thread as indicated in diagrams) to securely fasten the kickstand to the motorcycle frame. Ensure all bolts are tightened to the manufacturer's specifications.
  5. Test Functionality: Before riding, test the kickstand multiple times to ensure it deploys smoothly, locks securely in both the deployed and retracted positions, and provides stable support for the motorcycle.
Motorcycle Kickstand with dimensions: 25cm length, M10 thread, 3.7cm foot height
Kickstand dimensions and thread type for installation reference.

5. Operating Instructions

Operating the kickstand is straightforward:

  • To Deploy: When parking your motorcycle, ensure the ground is level and firm. Use your foot to push the kickstand down and forward until it fully extends and locks into place. Gently lean the motorcycle onto the kickstand, ensuring it is stable before dismounting.
  • To Retract: Before riding, ensure the kickstand is fully retracted and secured against the motorcycle frame. Failure to do so can cause serious accidents.

6. Maintenance

Regular maintenance will ensure the longevity and safe operation of your kickstand:

  • Cleaning: Periodically clean the kickstand to remove dirt, grime, and road debris. Use a mild soap and water solution, then rinse thoroughly and dry.
  • Lubrication: Apply a small amount of grease or lubricant to the pivot points and spring mechanism to ensure smooth operation and prevent corrosion.
  • Inspection: Regularly check all bolts and fasteners for tightness. Inspect the kickstand for any signs of wear, bending, cracks, or damage. Pay close attention to the footpad for excessive wear.
  • Corrosion Prevention: If the kickstand is exposed to harsh weather conditions, consider applying a protective wax or coating.

7. Troubleshooting

  • Kickstand is Stiff or Sticky: Clean and lubricate the pivot points and spring mechanism. Check for any obstructions.
  • Kickstand Does Not Stay Up/Down: Inspect the spring for damage or weakness. Ensure the locking mechanism is free of debris and functioning correctly.
  • Motorcycle is Unstable on Kickstand: Verify that the kickstand is fully deployed and locked. Check for loose mounting bolts. Ensure the ground surface is level and firm.
  • Damage or Performance Degradation: If the kickstand is damaged, bent, or its performance is degraded in any way, immediately cease using it and seek professional repair or replacement. Do not attempt to repair structural damage yourself.

8. User Tips

No specific user tips were available from reviews or Q&A for this product. However, general tips for motorcycle kickstands include:

  • Always check the stability of your motorcycle on the kickstand before walking away.
  • Avoid parking on soft ground or steep inclines, as this can cause the kickstand to sink or the motorcycle to tip over.
  • Consider carrying a small kickstand pad for parking on uneven or soft surfaces.

9. Warranty and Support

For any questions, concerns, or support regarding your MotoLovee CNC Aluminum Motorcycle Kickstand, please contact the seller or manufacturer directly. Keep your purchase records for warranty purposes.

An additional user manual in PDF format may be available for download: View User Manual (PDF).

© 2024 MotoLovee. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.