retekess TD004

Contents
Retekess Logo

Retekess TD004 Wireless Call Button

User Manual

1. Introduction

Thank you for choosing the Retekess TD004 Wireless Call Button. This product features a minimalist design, is easy to operate and install, and is suitable for various basic calling scenarios. To ensure smooth use, please read this instruction manual before use. For a complete guide, you may also refer to the official PDF manual: Retekess TD004 User Manual (PDF).

Product Name

Retekess TD004 Wireless Call Button

2. Product Overview

Retekess TD004 Call Button

Figure 1: Retekess TD004 Wireless Call Button

Product Structure

External Structure:
  • Housing: ABS plastic material, compact and lightweight.
  • Call Button: Single-point button on the front, made of soft and comfortable silicone.
  • Indicator Light: Embedded LED light in the center of the button to indicate the call status.
  • Battery Compartment: Screw-down design on the back, with one built-in specific model battery (12V/23A).
  • Mounting Components: High-adhesion adhesive on the back, supports adhesive installation without additional tools.
Internal Structure:
  • Simple Wireless Module: Low-power design, stable signal, compatible with universal call hosts.
  • Trigger Switch: Linked with the button to ensure activation upon pressing.

Function Introduction

  • One-button Call: A simple press of the button triggers a call signal; easy to use.
  • Status Indicator: The LED flashes (red) during a call and automatically turns off after a response.
  • Low Power Consumption Design: Extremely low standby power consumption; a single battery lasts for approximately 6000 cycles.
  • Easy Installation: Adhesive backing design; 3-second installation; easily repositionable.
  • Wide Compatibility: Supports pairing with most general-purpose call hosts, adapting to basic call needs.

Applicable Scenarios

The Retekess TD004 is ideal for small restaurants, convenience stores, offices, homes, small clinics, cafes, bars, and hotels for basic call and assistance scenarios.

Kitchen calling waiter scenario

Figure 2: Example usage in a restaurant setting

3. Setup

3.1. Installation Preparation

  1. Battery Insertion: Unscrew the battery compartment cover on the back of the call button. Insert one 12V/23A battery with the positive terminal facing up. Tighten the cover securely.
  2. Surface Selection: Select a flat, dry, and clean mounting surface.
  3. Mounting: Peel off the protective film from the adhesive backing on the call button. Attach the call button firmly to the chosen surface.
Two installation methods for TD004

Figure 3: Two installation methods: adhesive tape or screws (base included)

3.2. Device Pairing

  1. Enter Pairing Mode: Press and hold the call button for 5 seconds. The indicator light will flash rapidly, indicating that the device has entered pairing mode.
  2. Pair with Host: Follow the instructions of your specific Retekess call host (receiver) to initiate pairing.
  3. Confirmation: Once the call host displays "Pairing Successful," the indicator light on the call button will turn off, completing the pairing process.

4. Operating Instructions

4.1. Call Operation

To place a call, briefly press the call button on the front of the device. The LED light will flash once, indicating that a call signal has been sent to the paired receiver. The LED light will automatically turn off after the call is answered or acknowledged by the receiver.

4.2. Product Demonstration

Video 1: Unboxing and basic demonstration of the Retekess TD004 Call Button.

5. Maintenance

5.1. Battery Replacement

If the indicator light does not illuminate or flashes weakly after pressing the button, the battery is low and needs replacement. Unscrew the battery compartment cover on the back, remove the old battery, insert a new 12V/23A battery (positive terminal up), and securely tighten the cover.

5.2. Cleaning

To clean the device, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the housing and internal components.

6. Troubleshooting

  • Device not responding / Indicator not lighting up: Check if the battery is correctly installed and has sufficient charge. Replace the battery if necessary.
  • Call signal not received by host: Ensure the call button is properly paired with the host. Re-pair the device if needed. Check the distance between the call button and the host; ensure it's within the effective transmission range and there are no excessive obstructions.
  • Intermittent signal: Ensure the antenna is fully extended for optimal signal transmission. Avoid placing the device near large metal objects or other sources of radio interference.

Precautions

  • Avoid direct sunlight or high-temperature, humid environments during installation.
  • Do not press or drop the device forcefully to avoid damaging internal components.
  • Ensure the battery is installed correctly with the positive and negative terminals aligned to avoid short circuits.
  • When not in use for extended periods, remove the battery to prevent leakage and damage to the device.

7. Specifications

Brand Nameretekess
Model NumberTD004
OriginMainland China
CertificationCE, FCC
RF Frequency433MHz
Modulation ModeASK (AM)
MaterialABS
Power12V/23A battery (included)
Waterproof RatingIPX3 (Simple life waterproof)
Size96 x 42 x 15mm
Weight60g
Battery IncludedYes
MountingWith a base, can be fixed on the wall
Transmission distance diagram

Figure 4: Transmission range of approximately 250 meters in open areas.

Waterproof feature demonstration

Figure 5: The TD004 features simple life waterproof (IPX3) design.

8. User Tips

  • For optimal range, ensure the antenna is fully extended.
  • Test the call button's range and signal reliability in your specific environment after installation.
  • Consider placing call buttons in easily accessible locations for all users.

9. Warranty and Support

For product support, warranty information, or any inquiries, please contact Retekess directly:

This product complies with CE and FCC standards.

© 2024 Retekess. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.