ALLTRUE TGQ02

Contents

User Manual: DC 12V 24V 8A Adjustable LED Dimmer Switch

Model: TGQ02 | Brand: ALLTRUE

1. Introduction

This manual provides instructions for the installation, operation, and maintenance of your ALLTRUE TGQ02 DC 12V 24V 8A Adjustable LED Dimmer Switch. This product allows you to adjust the brightness of single-color LED lights to suit your specific needs, providing stepless dimming control.

2. Important Safety Information

Please read all safety warnings carefully before installation and use.

  • Supply Voltage: This product is designed for DC 12V-24V input only. NEVER connect it to AC110V or AC220V. Connecting to incorrect voltage will damage the device and may pose a safety hazard.
  • Short Circuit Prevention: To prevent short circuits, never connect two wires directly. Ensure all connections are secure and properly insulated.
  • Correct Wiring: Lead wires must be connected correctly according to the provided wiring diagram and color coding. Incorrect wiring can lead to malfunction or damage.
  • Environmental Conditions: Operate the dimmer within the specified working temperature range of -20°C to 60°C.

3. Package Contents

Please check the package for the following item:

  • 1 x ALLTRUE TGQ02 LED Dimmer Switch
LED Dimmer Switch in its packaging
The LED Dimmer Switch as received in its packaging.

4. Specifications

Feature Specification
Model Number TGQ02
Brand Name ALLTRUE
Working Temperature -20°C to 60°C
Supply Voltage DC 12V-24V
Output Channel 1 channel
Max Load Current 8A
Max. Load Power 96W
Function Stepless dimming
Product Dimensions (L*W*H) 89mm * 59mm * 35mm (approx. 3.50in * 2.32in * 1.38in)
Net Weight 65g
Material Plastic
Certifications CQC, CCC, ROHS, EMC, SAA, CE
Dimensions of the LED Dimmer Switch
Approximate dimensions of the dimmer switch.

5. Product Overview

The ALLTRUE TGQ02 LED Dimmer Switch features a compact design with clearly labeled input and output terminals and a rotatable manual knob for brightness adjustment.

Front view of the LED Dimmer Switch
Front view of the dimmer switch showing input/output terminals.
Top view of the LED Dimmer Switch with control knob
Top view highlighting the rotatable manual knob for dimming and ON/OFF positions.

6. Setup and Installation

Follow these steps to correctly install your LED Dimmer Switch:

  1. Power Off: Ensure that the power supply to your LED lighting system is completely turned off before beginning installation.
  2. Identify Connections: Locate the input (Power Supply) and output (LED Strip/Bulb) connections on the dimmer switch. The terminals are labeled 'IN' and 'OUT', with 'V+' for positive and 'V-' for negative.
  3. Connect Input: Connect the positive (+) wire from your DC 12V-24V power supply to the 'IN V+' terminal and the negative (-) wire to the 'IN V-' terminal.
  4. Connect Output: Connect the positive (+) wire from your LED strip or bulb to the 'OUT V+' terminal and the negative (-) wire to the 'OUT V-' terminal.
  5. Secure Connections: Ensure all wire connections are tight and secure to prevent loose contacts or short circuits.
  6. Mounting (Optional): The dimmer features mounting holes on its base, allowing it to be securely fastened to a surface using screws (not included).
  7. Power On: Once all connections are verified, you may restore power to your LED lighting system.
Wiring diagram for the LED Dimmer Switch
Wiring diagram showing connections for power input and LED output.

7. Operating Instructions

The dimmer switch is operated using the rotatable manual knob:

  • Turn On/Off: Rotate the knob clockwise from the 'OFF' position to turn on the lights. Continue rotating counter-clockwise to the 'OFF' position to turn off the lights completely.
  • Adjust Brightness: Once the lights are on, rotate the knob clockwise to increase brightness and counter-clockwise to decrease brightness. The dimmer provides stepless adjustment, allowing for fine control over light intensity.

8. Maintenance

To ensure optimal performance and longevity of your LED Dimmer Switch:

  • Cleaning: Use a soft, dry cloth to clean the exterior of the dimmer. Do not use abrasive cleaners or solvents.
  • Avoid Moisture: Keep the device away from water and high humidity environments.
  • Regular Checks: Periodically check wiring connections to ensure they remain secure.

9. Troubleshooting

If you encounter issues with your LED Dimmer Switch, refer to the following common problems and solutions:

Problem Possible Cause Solution
Lights do not turn on or dim. Incorrect wiring, no power, faulty LED, or dimmer is off. Check all wiring connections against the diagram. Ensure power supply is active. Rotate the knob to the 'ON' position. Test the LED with a direct power source if possible.
Dimmer does not regulate brightness effectively. Overload, incompatible LED type, or faulty unit. Ensure the total wattage of connected LEDs does not exceed 96W (8A at 12V/24V). This dimmer is designed for single-color LEDs; it may not work with multi-program or smart LEDs.
Dimmer gets hot during operation. Overload or insufficient ventilation. Reduce the load on the dimmer. Ensure it is installed in a well-ventilated area.
Dimmer does not work with car lights (negative grounded). Dimmer requires the negative wire of the lamp to be connected directly to the unit, not chassis ground. This dimmer is designed for systems where both positive and negative lines are switched through the unit. It may not be suitable for applications where the negative side of the load is grounded to the vehicle chassis, as this can bypass the dimmer's control.

10. User Tips

  • This dimmer is generally effective for standard single-color LED applications.
  • When installing in automotive settings, be mindful of how the negative terminal of your lights is wired. If it's chassis-grounded, this dimmer might not function as expected.
  • The knob allows for a full range of dimming, including a complete 'OFF' position.

11. Frequently Asked Questions (FAQ)

Q: Does the dimmer turn off the lights completely or just reduce them to a minimum brightness?
A: The dimmer features a rotatable knob with an 'OFF' position, allowing it to completely turn off the connected lights. When rotated clockwise, it provides stepless dimming from minimum brightness to full brightness.

12. Warranty and Support

This product comes with a one-year warranty from the date of purchase. The warranty covers manufacturing defects but excludes damage caused by artificial situations, misuse, or overload working.

For further assistance or detailed diagrams, you may refer to the original user manual PDF available at: User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.