1. Product Information
This manual provides instructions for the Uxcell Band Selector Rotary Switch. This device is designed for selecting different bands or channels in electronic equipment such as radios, TVs, and industrial control units.
Product Overview
- Product Name: Band Selector Rotary Switch
- Material: Metal, Plastic
- Switch Type: Knob switch
- Item Type: SWITCHES
- EU LVD Voltage: Low voltage: Below 50Vac or 75Vdc
- Certification: NONE
2. Safety & Warnings
Read all instructions before use to ensure safety and prevent damage.
- Warning: Keep the device and its cord (if applicable) out of reach of children under 3 years old.
- Always turn off the power supply before installation or maintenance.
- Do not disassemble the switch randomly.
- Avoid exposing the switch to water, dust, or corrosive substances.
- Prevent short circuits during installation and operation.
- Avoid heavy impact on the device.
3. Setup Instructions
Proper installation is crucial for the safe and effective operation of your rotary switch.
- Mounting: The switch requires a mounting hole with a diameter of 9.7mm / 0.38 inches. Ensure the mounting surface is clean and stable.
- Connection: Install the switch correctly according to your circuit diagram. Ensure all connections are tight and secure to prevent intermittent operation or electrical hazards.
- Knob Attachment: Securely attach the provided black plastic knob to the rotating shaft.

4. Operating Instructions
The rotary switch is designed for simple and reliable operation.
- Function: Rotate the knob to select different positions, which correspond to various bands, channels, or circuit configurations as defined by your application.
- Operation: Press lightly to turn on/off or select positions. Do not use excessive force when rotating the knob, as this can damage the internal mechanism.
5. Maintenance
To ensure the longevity and proper functioning of your rotary switch, follow these maintenance guidelines:
- Cleaning: Keep the switch clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Environment: Store and operate the switch in a dry, cool place. Keep it away from water, excessive moisture, and corrosive substances.
- Handling: Avoid heavy impact or dropping the switch.
- Disassembly: Do not attempt to disassemble the switch for maintenance. If the switch requires service, contact qualified personnel. Always turn off the power before any maintenance or inspection.
6. Troubleshooting
If you encounter issues with your rotary switch, consider the following:
- No Functionality: Ensure all wiring connections are secure and correctly made according to your circuit diagram. Verify that power is supplied to the circuit.
- Intermittent Operation: Check for loose connections or debris that might be obstructing the switch contacts.
- Stiff Rotation: If the knob is difficult to turn, do not force it. Ensure no foreign objects are lodged around the shaft.
If problems persist, consult a qualified technician or contact customer support.
7. Specifications
Detailed specifications for various models of the Band Selector Rotary Switch are provided below.

General Specifications
| Feature | Description |
|---|---|
| Product Name | Band Selector Rotary Switch |
| Material | Metal, Plastic |
| Fit Mounting Hole Diameter | 9.7mm / 0.38inch |
| Rotating Shaft Diameter | 6mm / 0.24inch |
| Shaft Length | 11.7mm / 0.46inch |
| Current Rating | Typically 0.3A (300mA) - Please verify for specific applications. |
Model-Specific Specifications & Dimensions
| Model | Contact Type | Pin Number | Dimensions (Max. H*D) |
|---|---|---|---|
| KCZ 4*4+K18-1 | 4Pole 4Position, 2Deck | 20 | 52x42mm / 2.05x1.65inch |
| KCZ 3*3+K18-1 | 3Pole 3Position, 1Deck | 12 | 44x42mm / 1.73x1.65inch |
| KCZ 1*4+K18-1 | 1Pole 4Position, 1Deck | 5 | 44x40mm / 1.73x1.57inch |
| KCZ 2*8+K18-1 | 2Pole 8Position, 2Deck | 18 | 52.6x42mm / 2.07x1.65inch |
| KCZ 1*5+K18-1 | 1Pole 5Position, 1Deck | 6 | 44x38mm / 1.73x1.5inch |
Dimensional Diagrams





8. User Tips
Based on user feedback, here are some helpful tips:
- Current Rating: Be aware that the typical current rating for these switches is around 0.3A (300mA). Ensure this is sufficient for your project's requirements to avoid overloading the switch.
- Quality: Users generally find the build quality to be decent and suitable for various electronic projects.
9. Warranty & Support
For product support, technical assistance, or warranty inquiries, please contact the manufacturer directly.
Manufacturer Information
- Manufacturer: Guangzhou Dajiali Network Technology Co., Ltd.
- Address: B395, Room 106, Rulin Street, Tianhe, Guangzhou, China
- Email: udb7910@126.com
EU Authorized Representative
- Representative: SUCCESS COURIER SL
- Address: CALLE RIO TORMESNUM.1, PLANTAI, DERECHAOFICINA 3Fuenlabrada, Madrid, 28947 Spain
- Email: successservice2@hotmail.com
A PDF version of this user manual may be available for download from the seller's product page.