1. Introduction
The Aqara Wireless Mini Switch is a compact and portable one-button remote control switch designed for smart home environments. It features Zigbee wireless connectivity, allowing it to control various smart accessories such as smart lights and smart plugs with single, double, or long press actions. Its small size and adhesive backing allow for flexible placement anywhere in your home.
Important: An Aqara Hub (multifunctional gateway) is required for this device to function and integrate with your smart home system, including Apple HomeKit. This product is intended for indoor use only.
2. Safety Information
- Do not expose the device to moisture or extreme temperatures.
- Do not attempt to disassemble or repair the device yourself.
- Keep the device away from children and pets.
- Ensure the installation surface is clean and dry for optimal adhesive performance.
- Avoid installing the switch on metal surfaces, as this may affect wireless transmission distance and signal strength.
3. Package Contents
Upon opening the package, you should find the following items:
- 1 x Aqara Wireless Mini Switch
- 1 x User Manual (available in Simplified Chinese, German, French, Spanish, Japanese, Korean, Russian, Traditional Chinese, English)
4. Device Overview
The Aqara Wireless Mini Switch features a minimalist design with key functional components:
- Push Button: The main circular area on the front of the switch used for all control actions (single press, double press, long press).
- Reset Button: A small hole located on the side of the switch. Used for pairing and effective range testing.
- Indicator Light: A small LED light that provides feedback during pairing and operation.
5. Setup Instructions
5.1. Prerequisites
Before setting up your Aqara Wireless Mini Switch, ensure you have:
- An Aqara Hub (multifunctional gateway) powered on and connected to your network.
- The Mi Home app or Apple Home app installed on your smartphone or tablet.
- A stable internet connection.
5.2. Pairing the Device
- Add the Hub: If you haven't already, add your Aqara Hub to the Mi Home app or Apple Home app following the Hub's Quick Start Guide.
- Open the App: Launch the Mi Home app or Apple Home app on your device.
- Navigate to Add Device: In the app, tap “Home” and then tap “+” in the top right corner to enter the “Add Device (Accessory)” page.
- Select Wireless Mini Switch: Scroll down and select “Wireless Mini Switch” from the list of available devices.
- Initiate Pairing: The app will prompt you to press and hold the reset hole on the switch for 3 seconds. Use a small pin or paperclip for this.
- Confirm Pairing: Continue holding until the blue light flashes 3 times, then release. The app should indicate "Connected successfully" or "Added successfully".
If the connection fails, move the Wireless Mini Switch closer to the Aqara Hub and try the pairing process again.
5.3. Installation
The Aqara Wireless Mini Switch offers flexible installation options:
- Effective Range Test: Before final installation, perform an effective range test. Single press the reset button on the accessory at your desired position. If the Hub makes voice prompts, it indicates that the accessory can communicate effectively with the Hub.
- Placement: You can simply place the switch directly in your desired position on any flat surface.
- Adhesive Mounting: For a more secure installation, remove the protective film from the back of the switch and stick it to the desired position. Ensure the surface is clean and dry before applying.
Note: Avoid installing the switch on metal surfaces to maximize signal strength and wireless transmission distance.
6. Operating Instructions
The Aqara Wireless Mini Switch provides three customizable control settings:
- Single Press: A quick press and release of the button.
- Double Press: Two quick presses of the button in succession.
- Long Press: Press and hold the button for a few seconds.
Each of these actions can be configured within the Mi Home app or Apple Home app to trigger specific smart home scenes or control individual devices. For example:
- Before sleeping: A single press could turn off all connected appliances.
- Waking up at night: A double press could turn on a nightlight.
- When going out: A long press could activate a home security mode or turn off all lights.
6.1. Common Applications
The versatility of the Aqara Wireless Mini Switch allows for various practical applications:
- Smart Doorbell: When paired with an Aqara Hub, it can serve as a doorbell. Ringtones can be customized via the app.
- Emergency Button: It can be programmed as a panic button to trigger alerts (local siren, mobile notifications) in case of an emergency.
- Home Automation: Create complex scenes and automations with other Aqara smart accessories. Automations will still work even if the Wi-Fi connection is unstable, as long as the Hub is powered.
7. Maintenance
7.1. Battery Replacement
The Aqara Wireless Mini Switch is powered by a CR2032 cell battery, offering approximately 2 years of battery life under normal usage. When the battery is low, the device's performance may be affected, or it may stop responding. To replace the battery:
- Gently pry open the back cover of the switch.
- Remove the old CR2032 battery.
- Insert a new CR2032 battery with the correct polarity.
- Close the back cover securely.
7.2. Cleaning
To clean the device, use a soft, dry cloth. Do not use liquid cleaners or aerosol sprays, as they may damage the device.
8. Troubleshooting
- Device not responding: Check the battery level. If the battery is low or depleted, replace it with a new CR2032 battery.
- Connection issues during pairing: Ensure the Aqara Hub is powered on and within range. Move the Wireless Mini Switch closer to the Hub and attempt the pairing process again.
- Intermittent connectivity: Avoid placing the switch on metal surfaces, as this can interfere with the Zigbee signal. Ensure there are no major obstructions between the switch and the Hub.
- App not recognizing the device: Verify that your Aqara Hub is properly connected to the app and has the latest firmware. Restart the app and try adding the device again.
9. Specifications
| Feature | Detail |
|---|---|
| Model Number | WXKG11LM |
| Dimensions | 45 x 45 x 12 mm (1.77 x 1.77 x 0.47 in.) |
| Wireless Protocol | Zigbee |
| Battery Type | CR2032 |
| Power Source | DC (Battery) |
| Operating Temperature | -10°C to +50°C (14°F to 122°F) |
| Operating Humidity | 0 – 95% RH, non-condensing |
| State of Assembly | Ready-to-Go |
| Control Channels | 2 CHANNELS (referring to single/double click actions) |
| Origin | Mainland China |
| Certification | CE |
10. User Tips
- While the switch primarily uses adhesive for mounting, it is generally possible to use other methods like small screws if desired, though this is not officially supported and may require modification.
- For optimal performance, ensure the switch is within effective range of your Aqara Hub.
- Experiment with different press actions (single, double, long) to create diverse automation scenarios that fit your daily routines.
11. Warranty and Support
For detailed warranty information, technical support, and further product inquiries, please refer to the official Aqara website or contact Aqara customer service. The user manual included in the package also contains contact information and specific warranty terms.
You can find more details on HomeKit integration at www.aqara.com.