CNSPEED YC101312

Contents

CNSPEED 12V 2'' 52mm Auto Water Temperature Gauge User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your CNSPEED 12V 2'' 52mm Auto Water Temperature Gauge. This universal gauge is designed to provide accurate water temperature readings for your vehicle, featuring a clear smoke lens and a super bright LED display.

CNSPEED Water Temperature Gauge Kit

Figure 1: CNSPEED Water Temperature Gauge kit including the gauge, sensor, and packaging.

2. Package Contents

Please check the package for the following items:

  • 1 x Water Temperature Gauge
  • 1 x Water Temperature Sensor (1/8NPT size)
  • 1 x Installation Manual (content integrated into this document)

3. Setup and Installation

Important: Professional installation is highly recommended to ensure correct wiring and safe operation.

3.1 Wiring Diagram

Refer to the diagram below for proper electrical connections. Ensure all connections are secure and insulated.

GT-520 Oil/Water Temperature Gauge Wiring Diagram

Figure 2: Wiring diagram for the GT-520 Oil/Water Temperature Gauge.

  • Red Wire: Connect to a 12V ignition switch power source (+).
  • Black Wire: Connect to the vehicle's battery ground (-).
  • Temperature Sensor:
    • Connect the sensor wire from the gauge to the temperature sensor unit.
    • Ensure the temperature sensor unit is properly installed in the engine's cooling system (e.g., radiator hose adapter or engine block).
    • The sensor unit itself also requires a ground connection to the battery (-) and a 12V ignition switch connection (+).

3.2 Mounting the Gauge

The gauge is designed for front placement. Securely mount the gauge in a suitable location on your dashboard or gauge pod using the provided mounting bracket and hardware. Ensure the gauge is stable and visible to the driver.

4. Operating Instructions

Once properly installed and powered, the gauge will display the water temperature in Celsius. The measurement range is from 40°C to 120°C. The gauge features a super bright LED display for clear visibility, especially at night.

Gauge Face with Red Backlight

Figure 3: Close-up view of the gauge face with its red LED backlight illuminated.

Video 1: Demonstration of the CNSPEED Water Temperature Gauge's LED backlight and needle movement.

5. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the gauge face. Avoid abrasive cleaners or solvents that could damage the lens or housing.
  • Connection Check: Periodically inspect all wiring connections to ensure they are secure and free from corrosion.
  • Sensor Check: Ensure the temperature sensor is free from debris and properly seated in its location.

6. Troubleshooting

  • Gauge Not Lighting Up/No Reading:
    • Check the red wire connection to the 12V ignition switch for power.
    • Check the black wire connection for a proper ground.
    • Verify the sensor wire is securely connected to both the gauge and the sensor unit.
  • Incorrect or Erratic Readings:
    • Ensure the temperature sensor is correctly installed and making good contact with the coolant.
    • Check for any loose or corroded wiring connections between the sensor, gauge, and power sources.
    • Verify the sensor unit itself has proper ground and 12V connections.

7. Specifications

Gauge Dimensions Diagram

Figure 4: Dimensional drawing of the water temperature gauge.

FeatureSpecification
Condition100% Brand New
Product NameWater Temp Gauge
Measurement Range40~120°C
MaterialMetal & Plastic
Housing ColorGray
Voltage12V
Item Length57mm (2.24in)
Item Width47mm (1.85in)
Item Height52mm (2.05in)
Cable Length51cm (20.08in)
Sensor Size1/8NPT
Placement on VehicleFront
Item Weight0.3 KG
Special Features6144SB
FitmentUniversal Car 2"/52mm diameter
OriginMainland China
Manufacturer Part NumberWater Temperature Gauge
Interchange Part NumberWater Temp Gauge
Other Part NumberYC101312

8. User Tips

  • Professional Installation: For optimal performance and safety, it is highly recommended to have the gauge installed by a qualified professional.
  • Visual Monitoring: The gauge provides a clear visual indication of your engine's water temperature. Regularly monitor the gauge during vehicle operation. Please note that this gauge provides a visual reading and does not include an audible warning for exceeding temperature thresholds.
  • Compatibility: While this gauge is universal, always verify the dimensions and sensor thread size (1/8NPT) for compatibility with your specific vehicle before installation.

9. Warranty and Support

For any questions, technical support, or warranty inquiries, please contact your seller directly. A PDF version of this user manual may also be available for download from the product page.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.