Product Overview
These Motolovee Universal Rearview Mirrors are designed for motorcycles, scooters, and mopeds, featuring a 360-degree adjustable convex glass for a wider field of view. They are constructed with a durable ABS head cover and a metal rod, suitable for vehicles with an 8mm clockwise thread interface.
Safety Warnings
- Before installation, park the motorcycle on flat ground, support the main stand, and turn off the power to prevent the vehicle from tipping over and causing injury.
- This rearview mirror is only an auxiliary tool for observing road conditions behind. Always turn your head to check directly before turning or changing lanes; do not rely entirely on the mirror.
- The mirror surface is made of glass. Stop using it immediately if cracks or damage occur to avoid injury from flying fragments.
- After installation, make sure the bracket is securely fastened. Looseness or shaking during riding will affect vision judgment and cause danger.
- Convex mirrors (if applicable) make objects appear farther than they actually are. Please judge the following distance carefully when changing lanes.
Specifications
| Feature | Detail |
|---|---|
| Product Name | Motorcycle Rearview Mirrors |
| Model Name | Z2212 |
| Material | ABS head cover, Metal rod, Glass mirror |
| Glass Type | Convex |
| Glass Diameter | 10.3 cm |
| Rod Length | 20.5 cm |
| Thread Diameter | 8mm Clockwise |
| Item Width | 10 cm |
| Item Height | 10 cm |
| Item Length | 32 cm |
| Item Weight | 0.4 kg |
| Colors Available | Black, Red, Yellow, Blue, Silver, White |
| Compatibility | Universal fit for most motorcycles, scooters, and mopeds with 8mm clockwise thread. |
| Light Source | No |
| High-concerned chemical | None |
Installation Steps
Tools Preparation
- Phillips screwdriver
- Wrench (selected according to screw specifications)
Installation Procedure
- Remove the original mirror: Use a wrench to unscrew the original rearview mirror on the handlebar, and clean dust and oil from the mounting hole.
- Confirm interface specification: Check whether the handlebar thread is 8mm or 10mm, and select the corresponding mirror interface.
- Preliminary fixation: Align the mirror bracket with the handlebar interface and screw in the bolt by hand until preliminarily fixed (do not use excessive force to avoid thread slipping).
- Pre-adjust the angle: Sit in the standard riding position, rotate the mirror and bracket to roughly adjust the angle for a clear rear view.
- Final tightening: Use a wrench to tighten the bolt (recommended torque: 15–20 N·m) to ensure no looseness or shaking during riding.
- Installation check: Gently shake the mirror by hand to confirm it is firm and the angle is correct. Installation is complete.
Mirror Adjustment Method
- Maintain a normal riding posture, hold the handlebars with both hands, and look straight ahead.
- Left mirror: Rotate the mirror so the horizon is at the upper 1/3 of the mirror, clearly covering the left rear lane and roadside.
- Right mirror: Rotate the mirror so the horizon is at the center, clearly covering the right rear and adjacent lanes.
- After adjustment, recheck the bracket to ensure the angle will not shift due to vibration while riding.
Maintenance & Care
- Daily cleaning: Wipe the mirror with a soft cloth (such as eyeglass cloth) dampened with clean water or neutral detergent. Do not use rough cloths, steel wool, or alcohol to avoid scratching the coating.
- Regular inspection: Every 500 km or monthly, check whether bracket screws are loose and whether the mirror has cracks or scratches. Tighten or replace parts promptly if problems are found.
- Storage protection: When the motorcycle is not in use for a long time, cover the mirrors with a dust-proof cloth to prevent aging of the housing and fading of the mirror due to direct sunlight.
- Environmental protection: Dry water stains on the mirror and bracket after riding in rain to prevent rust. In low-temperature environments, avoid flushing the mirror with hot water to prevent glass breakage from extreme temperature differences.
Troubleshooting
| Symptom | Possible Cause | Solution |
|---|---|---|
| Mirror shaking or loose | Bracket screws not tightened / thread slipping | Retighten screws; replace bracket or interface nut if threads are damaged |
| Blurry vision or double image | Mirror stained / coating damaged | Clean with neutral detergent; replace mirror if coating is damaged |
| Mirror cracked or chipped | External impact / material aging | Replace the entire mirror immediately; do not replace only the glass |
| Unable to install / interface mismatch | Wrong thread specification / foreign matter in interface | Verify thread size and replace matching bracket; clean foreign matter from interface |
User Tips
- Regularly check the tightness of the mirror mounting screws, especially after riding on rough terrain, to prevent loosening and ensure stable vision.
- Always perform a quick visual check of your mirrors before each ride to ensure they are clean, undamaged, and correctly adjusted for optimal visibility.
Warranty and Support
For any warranty claims, technical support, or inquiries regarding your Motolovee rearview mirrors, please contact the seller directly through your purchase platform. Keep your proof of purchase for faster service.
A detailed user manual in PDF format is available for download: User Manual (PDF)