UXCELL Rubber Flat Washer

Contents

Uxcell Rubber Flat Washers User Manual

Model: Rubber Flat Washer

1. Introduction

This manual provides instructions for the proper use, installation, and maintenance of Uxcell Rubber Flat Washers. These flat rubber washers are designed for sealing applications in various systems, offering heat and oil resistance. They are commonly used in plumbing, valves, bearings, hydraulic systems, pumps, home appliances, and electric motors.

The package typically contains 50 pieces of flat washers in various sizes.

A pile of black rubber flat washers
Figure 1: Assortment of Uxcell Rubber Flat Washers.

2. Safety & Warnings

Please read all instructions carefully before using the product to ensure safety and prevent damage.

  • General Safety: Always wear appropriate personal protective equipment (PPE) such as gloves and eye protection when handling and installing washers, especially in industrial or plumbing applications.
  • Children: Keep the product out of reach of children under 3 years old. Small parts may pose a choking hazard.
  • Chemical Compatibility: Ensure the rubber material is compatible with the fluids or gases it will be exposed to. Incompatible materials can lead to degradation and leakage.
  • Temperature Limits: Do not expose the washers to temperatures exceeding their specified operating range, as this can compromise their sealing integrity.

3. Product Components

Each package contains:

  • 50 Pcs x Flat Washers (various sizes)
Two black rubber flat washers with dimensions 5x12x2mm labeled
Figure 2: Example of a 5x12x2mm rubber flat washer.

4. Specifications

Attribute Value
Brand Name UXCELL
Model Number Rubber Flat Washer
Material Rubber
Shape Ring Gasket
Color Black
Type Anti Oil Seal Washers
Feature Heat Resistant, Oil Resistant Sealing Ring
Standard or Nonstandard Standard
High-concerned chemical None
Certification NONE
Origin Mainland China
Package Content 50(+/-2%)pcs x Rubber Flat Washer

5. Installation

  1. Inspection: Before installation, carefully check each washer for any signs of cracks, deformation, or aging. Do not use damaged washers.
  2. Surface Preparation: Ensure the sealing surface is clean and free from any oil, debris, or foreign particles. A clean surface is crucial for an effective seal.
  3. Placement: Install the washer into the designated groove. Ensure it is seated evenly without twisting or stretching the material.
  4. Securing: Once properly positioned, secure the components as required by your specific application (e.g., tighten a faucet hose connection).
Two black rubber flat washers, top view, showing their flat design
Figure 3: Top view of two rubber flat washers.

6. Operation

Uxcell Rubber Flat Washers are designed to create a tight seal between two surfaces, preventing leakage of fluids or gases. Once installed correctly, they function passively as a barrier. Their heat and oil-resistant properties make them suitable for environments where these factors are present.

7. Maintenance

  • Regular Inspection: Periodically inspect installed washers for any signs of wear, cracking, hardening, or degradation.
  • Replacement: If any signs of damage or leakage are observed, replace the washer immediately to maintain system integrity.
  • Storage: Store unused washers in a dry, cool, and dark place to prevent material degradation. Avoid storing them under heavy objects or in a manner that causes extrusion or deformation.
  • Avoid Harsh Conditions: Do not expose the washers to sharp objects, excessively high temperatures, or corrosive media, as these can cause premature failure.

8. Troubleshooting

  • Leakage After Installation:
    • Ensure the correct size washer was used for the application.
    • Verify that the sealing surfaces were clean and free of debris before installation.
    • Check if the washer was installed evenly without twisting or stretching.
    • Inspect the washer for any damage that might have occurred during or after installation. Replace if damaged.
    • Confirm that the components were tightened sufficiently to compress the washer and create a seal, without overtightening which can damage the washer.
  • Washer Degradation:
    • Ensure the rubber material is compatible with the specific fluid or gas it is sealing. Some chemicals can degrade rubber over time.
    • Verify that the operating temperature is within the washer's heat resistance limits.
    • Avoid prolonged exposure to direct sunlight or harsh UV light during storage or operation, as this can accelerate aging.

9. User Tips

  • These rubber washers can offer some vibration-absorbing qualities in certain applications.
  • For applications involving gas, it is crucial to verify the specific rubber compound's compatibility with the type of gas to ensure a safe and effective seal. If unsure, consult a professional or the manufacturer.

10. Manufacturer Information

Manufacturer: Guangzhou Dajiali Network Technology Co., Ltd.

Address: B395, Room 106, Rulin Street, Tianhe, Guangzhou, China

EU Authorized Representative: SUCCESS COURIER SL

Address: CALLE RIO TORMESNUM. 1, PLANTAI, DERECHAOFICINA 3Fuenlabrada, Madrid, 28947 Spain

11. Additional Resources

For a downloadable version of this user manual, please refer to the official PDF document: User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.