1. Product Introduction
The DIANQI LTA-505 Tower Stack Light, also known as a multi-layer warning light, industrial signal light, or stack light, is a visual and auditory signaling device designed for industrial automation equipment, assembly lines, CNC machines, and similar applications. It provides clear status indication through colored lights and audible alarms.

2. Specifications
| Feature | Description |
|---|---|
| Brand Name | DIANQI |
| Model Number | LTA-505 |
| Item Type | Indicator Lights |
| Light Source | High-brightness LED (shock resistant, long lifespan, high lumens) |
| Light Colors | Red, Yellow, Green (Base colors); Optional: Blue, White. Each color represents a different status. |
| Sound Module | Integrated buzzer or piezoelectric sound module. Volume can reach up to 85dB or higher, supporting continuous or pulse alarm tones. |
| Operating Voltage | 12V, 24V, 110V, 220V |
| Protection Level | IP54 |
| Lifespan | LED lifespan exceeds 50,000 hours under static, non-vibrating conditions; some high-brightness LED models exceed 100,000 hours. |
| Installation Methods | Supports wall mounting, pole mounting. |
| Origin | Mainland China |
| Certification | CE |

3. Setup Instructions
3.1 Pre-installation Preparation
- Confirm the installation location is stable and away from strong electromagnetic interference sources.
- Ensure the light and sound can be clearly perceived.
- Check that the product appearance is intact.
- Verify that the voltage specification of the product matches the site power supply.
3.2 Module Assembly
- Select the required light modules of different colors and the sound module.
- Connect them sequentially using the rotary bayonet joint structure.
- Modules conduct electricity via spring contact plates and terminals; ensure connections are tight and conductive reliability.

3.3 Fixed Installation
- Securely install the assembled tower stack light in the designated location via the base (e.g., wall-mount base or pole base).
- Ensure it is stably placed vertically or horizontally without shaking.


4. Operating Instructions
4.1 Wiring Operation
- **Always cut off the power supply before wiring.**
- Perform wiring in a de-energized state.
- According to the wiring diagram (not provided in this manual, refer to product packaging or official documentation), correctly connect the power cable, each layer's light control cable, and the sound control cable to the terminal blocks.
- Typically, the power positive and negative poles connect to a 24V DC power supply, and each control terminal connects to a PLC output point or control switch.
4.2 Power-on Debugging
- Restore power.
- Sequentially trigger each layer of light and sound via the PLC or control switch.
- Check if the lights illuminate, flash, and sound according to the preset logic.
- Confirm there is no abnormal heating or poor contact.
5. Maintenance
5.1 Module Maintenance
- When disassembling or replacing modules, first cut off the power supply.
- Handle with care to avoid pulling wires forcefully or damaging the bayonet joint structure.
6. Troubleshooting
- **Light does not illuminate:** Check if the power supply is normal and confirm if the wiring is loose or reversed. If a certain layer does not light up, the LED module of that layer may be damaged or have poor contact. Try re-plugging the module or replacing it.
- **Abnormal sound:** If the buzzer does not sound or the volume is too low, check if the sound control line is properly connected and confirm if the volume setting is turned down (some models support brightness/volume adjustment). If there is noise, it may be due to unstable voltage or module failure.
- **Abnormal flashing:** Check if the control signal is stable (e.g., PLC output is normal) and confirm if the flashing frequency setting meets requirements. Some models can adjust the flashing mode via the control circuit.
7. Safety Warnings
- **Power-off operation:** Always cut off power during operation; strictly prohibit live work to prevent electric shock risk.
- **Strictly prohibit private disassembly:** Strictly prohibit disassembling the core control circuit part to avoid damaging precision electronic components or voiding the warranty.
- **Immediate power-off:** If the product emits smoke, has a burnt smell, or the housing is overheated, immediately cut off the power supply and stop using it; contact the supplier for handling.
- **Prevent dropping or impact:** During installation and maintenance, avoid dropping from a height or severe impact to prevent damage to the LED lens or internal circuit.
- **Voltage Matching:** Strictly use the rated voltage for power supply; do not connect excessively high or low voltage to avoid damaging the LED or control circuit.
- **Wiring Standards:** Ensure correct polarity during wiring to avoid burning components due to reverse connection. Tighten terminal screws to prevent poor contact or short circuits due to looseness.
- **Environmental Adaptation:** Avoid installation in flammable, explosive, or strongly corrosive gas environments. If used in humid or dusty environments, ensure the protection level meets requirements; select a sealed design if necessary.
8. User Tips
- For models with adjustable sound, ensure the volume setting is not turned down if the buzzer is not audible.
- If the flashing behavior is not as expected, check the control signal stability. Some models allow adjustment of the flashing mode via the control circuit.
9. Warranty and Support
For detailed warranty information, technical support, or to report issues, please contact your vendor or refer to the official product documentation. A comprehensive user manual in PDF format is available for download: View User Manual (PDF).