ZHAOKE TW-001

Contents

ZHAOKE TW-001 Vintage Pendant Light User Manual

Model: TW-001

1. Introduction

Thank you for purchasing the ZHAOKE TW-001 Vintage Pendant Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

2. Safety Instructions

WARNING: Risk of electric shock. Installation should only be performed by a qualified electrician.

  • Always switch off and disconnect the main power supply (230V, 100V, 110V, etc.) at the circuit breaker before starting any work on the luminaire.
  • Be extremely cautious when connecting the luminaire to the power supply to avoid electric shock.
  • Before drilling, check the course of power lines to ensure you do not damage them.
  • If the power cable is damaged, the product is unusable and must be replaced by a qualified professional.
  • Do not modify the fixture in any way.
  • Ensure all connections are secure and properly insulated.

3. Package Contents

Please check that all parts are present and undamaged before installation.

  • Pendant Light Shade (Black, White, Grey, etc., depending on selection)
  • Lamp Holder (Brass finish)
  • Ceiling Plate/Canopy
  • Adjustable Power Cable
  • Mounting Bracket
  • Screws and Wall Plugs
  • Instruction Manual (this document)

Note: Light bulbs are NOT included. This fixture requires an E27 base bulb.

4. Setup and Installation

Follow these steps carefully for proper installation. Refer to the diagrams for visual guidance.

4.1. Single Pendant Light Assembly

  1. Attach the lamp holder to the pendant shade.
  2. Secure the mounting bracket to the ceiling using the provided screws and wall plugs.
  3. Connect the power cable wires (Live and Neutral) from the fixture to your household wiring. Ensure proper polarity and secure connections.
  4. Mount the ceiling plate to the mounting bracket, covering the wiring.
  5. Adjust the cable length as desired. The cable can be shortened by pushing it up into the ceiling plate or by cutting and re-stripping the wires (ensure power is off).
  6. Screw in an E27 base light bulb (not included).
Exploded view diagram of a single pendant light showing ceiling plate, cable, lamp holder, shade, and bulb.

Figure 1: Exploded View of Single Pendant Light

4.2. Multiple Pendant Light Assembly (Bar Type)

  1. Assemble each individual pendant light (shade to lamp holder).
  2. Attach the individual pendant cables to the multi-light bar ceiling plate.
  3. Secure the mounting bracket for the bar to the ceiling.
  4. Connect the main power cable wires from the bar fixture to your household wiring.
  5. Mount the bar ceiling plate to the mounting bracket.
  6. Adjust the cable length for each pendant as desired.
  7. Screw in E27 base light bulbs (not included) into each pendant.
Detailed assembly diagram for multiple pendant lights showing steps for connecting individual pendants to a bar and then to the ceiling.

Figure 2: Multi-Pendant Light Assembly Steps

4.3. General Installation Steps

General 8-step installation diagram for pendant lights, including safety notes and visual steps for mounting and wiring.

Figure 3: General Installation Overview

5. Operating Instructions

Once installed and a compatible E27 bulb is screwed in, your ZHAOKE TW-001 pendant light operates via your standard wall light switch. This fixture is not dimmable.

6. Maintenance

6.1. Cleaning

  • Always disconnect power before cleaning.
  • Wipe the fixture with a soft, dry cloth.
  • Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.

6.2. Bulb Replacement

  • Ensure the power is turned off at the circuit breaker and the bulb has cooled down.
  • Carefully unscrew the old E27 bulb.
  • Screw in a new E27 LED bulb. Do not overtighten.

7. Troubleshooting

ProblemPossible CauseSolution
Light does not turn onNo power to the fixture
Bulb is faulty or loose
Wiring issue
Check circuit breaker and wall switch
Replace or tighten bulb
Consult a qualified electrician
Light flickersLoose bulb
Incompatible bulb
Loose wiring connection
Tighten bulb
Try a different E27 LED bulb
Consult a qualified electrician

8. Specifications

FeatureSpecification
Model NumberTW-001
Brand NameZHAOKE
Item TypePendant Lights
Installation TypeCord Pendant
MaterialMetal (Iron)
FinishPainted
StyleModern Style
Light SourceLED bulbs (E27 Base Type)
Number of Light Sources1 (per pendant)
Voltage90 - 260 V
Power SourceAC
Bulbs IncludedNo
DimmableNo
Lighting Area5-10 square meters
Luminous Flux<60 (per bulb, typical for decorative bulbs)
Warranty3 Years
Shade Diameter22 cm (approx.)
Shade Height16.5 cm or 14.5 cm (approx., depending on variant)
Cable Length100 cm (adjustable for single pendant), 20-140 cm (adjustable for multi-pendant bar)
Ceiling Plate Diameter (Single)10 cm (approx.)
Ceiling Bar Length (Multi-pendant)25 cm (approx.)
Dimensions diagram for a single pendant light showing shade diameter, height, cable length, and ceiling plate diameter.

Figure 4: Single Pendant Light Dimensions

Dimensions diagram for a three-light pendant bar showing bar length, adjustable cable length, shade height, and diameter.

Figure 5: Multi-Pendant Light Dimensions

9. User Tips

  • Many users find these lamps beautiful and straightforward to install, even for DIY enthusiasts.
  • The cable length is adjustable; you can shorten it to your desired height by pushing excess cable into the ceiling canopy or by carefully cutting and re-stripping the wires (ensure power is off).
  • Since bulbs are not included, consider purchasing decorative E27 LED bulbs (e.g., Edison-style) to enhance the vintage aesthetic.
  • The fixture is designed to work with a wide voltage range (90-260V), making it compatible with both 110V and 220V electrical systems.

10. Warranty and Support

The ZHAOKE TW-001 Vintage Pendant Light comes with a 3-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase.

For warranty claims, technical support, or any questions not covered in this manual, please contact your retailer or the seller directly.

© 2024 ZHAOKE. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.