JKGBL XDD-3

Contents

Modern LED Ceiling Light

Installation and User Manual

1. Introduction

Thank you for purchasing the JKGBL Modern LED Ceiling Light. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and keep it for future reference.

Multi-colored LED ceiling lights, showing various sizes
Figure 1: JKGBL Modern LED Ceiling Light in various colors and sizes.

2. Product Information

  • Product Name: LED Ceiling Light
  • Model Number: XDD-3
  • Dimensions: Available in 23CM, 30CM, 40CM, 50CM, 60CM, 78CM diameters.
  • Height: 50mm (Ultra-thin design)
  • Application: Suitable for indoor spaces such as bedrooms, living rooms, studies, foyers, bathrooms, kitchens, dining rooms, exhibition halls, corridors, and balconies.
  • Materials: Wrought iron body, light-diffusing acrylic panel, and LED light source module.
  • Light Colors: Warm White, Natural White, and Cool White.
  • Dimming Configurations:
    • Non-dimmable: Single warm white or single cold white, no remote control, no APP function.
    • RC Infrared Remote Control: Achieves 3000K-6000K arbitrary light color and brightness. Continuous wall switch can cycle through different lighting effects. Default white light on first power-up (if switched off for more than 3 minutes).
    • 2.4G Remote Control (with memory function): Achieves 3000K-6000K arbitrary light color and brightness. Continuous wall switch can cycle through different lighting effects. Default white light on first power-up. Memory function retains last set light color and brightness (if switched off for more than 3 minutes).
    • Mobile APP Function: Available for AC185V-265V voltage versions with 2.4G remote control. Users can scan the QR code on the remote to install the APP and control the lamp via mobile phone. AC90V-110V voltage versions do not have mobile APP function.
  • Power Source: AC (90 - 260 V)
  • Luminous Flux: 2000-82000
  • Number of Light Sources: > 20
  • Installation Style: Surface mounted, self-contained
  • Finish: PC
  • Technics: Perforated
  • Certification: CE, EMC, ROHS
  • Origin: Mainland China
Specifications table for different diameters, wattages, and recommended lighting areas
Figure 2: Detailed specifications including dimensions, wattage, and recommended lighting area.
Diagram showing remote control and mobile app configuration options for 220V and 110V versions
Figure 3: Configuration description for remote control and mobile app functionality.

3. Safety Precautions

WARNING: To prevent electric shock, always turn off the main power supply before installation and verify that the circuit is de-energized.

  • Ensure the ceiling's load-bearing capacity can support the fixture's weight (recommended ≥ 5kg).
  • If you are unfamiliar with electrical wiring, consult a qualified electrician.
  • Do not use the fixture in humid, high-temperature (>45°C), or flammable and explosive environments.
  • Do not disassemble the internal components of the fixture to avoid circuit damage or safety hazards.
  • When replacing the light source, turn off the power and use an LED module of the same specifications.

4. Tools and Accessories

4.1. Required Tools (Not Included):

  • Electric drill
  • Screwdriver
  • Tape measure
  • Insulating tape
  • Wire stripper

4.2. Included Accessories:

  • LED Ceiling Light body
  • Expansion screws
  • Self-tapping screws
  • Wiring terminals
  • Instruction manual
  • Remote control (if equipped with dimmable version)
Image showing foam packaging for the ceiling light
Figure 4: The ceiling light is securely packaged with foam for protection.

5. Installation Steps

Follow these steps carefully to install your LED Ceiling Light:

Step 1: Positioning and Drilling

  • Measure and mark the installation holes on the ceiling, aligning them with the base mounting holes of the light fixture.
  • Drill holes at the marked positions and insert the expansion screws.
Installation Diagram 1 - Light base
Figure 5: Diagram showing the light base and its mounting points.
Installation Diagram 2 - Marking and drilling holes
Figure 6: Diagram illustrating how to mark and drill holes for installation.

Step 2: Fixing the Base

  • Thread the room's power cable through the fixture's inlet hole.
  • Align the base with the expansion screws and securely tighten the self-tapping screws, ensuring the base is firmly attached to the ceiling.
Installation Diagram 3 - Fixing the base to the ceiling
Figure 7: Diagram showing the light base being fixed to the ceiling.

Step 3: Wiring Connection

  • Connect the room's power cables to the corresponding wires on the light fixture:
    • Live Wire (L): Connect the room's live wire (typically red/brown) to the fixture's live wire terminal.
    • Neutral Wire (N): Connect the room's neutral wire (typically blue/black) to the fixture's neutral wire terminal.
    • Ground Wire (PE): Connect the room's ground wire (typically yellow/green) to the fixture's ground terminal.
  • Secure all connections with wiring terminals and insulate them with insulating tape if necessary.
Installation Diagram 4 - Wiring connections (L, N, G)
Figure 8: Diagram illustrating the wiring connections (Live, Neutral, Ground).

Step 4: Installing the Lampshade

  • Slightly bend the acrylic lampshade with both hands and insert it into the fixture.
Installation Diagram 5 - Installing the lampshade
Figure 9: Diagram showing the installation of the acrylic lampshade.

Step 5: Power Test

  • Restore power and test if the light turns on normally.
  • If the light does not turn on, check the wiring connections and power supply.
Installation Diagram 6 - Finished light
Figure 10: The fully installed LED ceiling light.

6. Instructions for Use

  • Initial Use: It is recommended to keep the light on for 30 minutes after installation to check for abnormal heating or flickering.
  • Switch Control: Control the light switch and brightness adjustment via the wall switch or remote control (if equipped).
  • Remote Control Pairing (if applicable): The remote control is typically paired with the fixture before shipment. If re-pairing is needed, refer to the remote control's specific instructions.
  • Mobile App Control (if applicable): For AC185V-265V voltage versions with 2.4G remote control, scan the QR code on the remote to install the mobile app and control the light via your smartphone.

7. Cleaning and Maintenance

  • After turning off the power, wipe the lampshade with a dry, soft cloth.
  • Avoid using chemical cleaners, as they can cause corrosion of the diffuser.

8. Troubleshooting

  • Flickering, Failure to Light, or Abnormal Noise: Turn off the power and check the wiring.
  • If the issue persists after checking the wiring, contact after-sales service for assistance.

9. Specifications

Feature Detail
Brand NameJKGBL
Model NumberXDD-3
Item TypeCeiling Lights
Installation MethodSurface mounted, self-contained
Body MaterialAluminum, Ironware + Acrylic, Plastic
FinishPC
Light SourceLED Bulbs (Bulbs Included: Yes)
Voltage90 - 260 V (AC Power Source)
Luminous Flux2000-82000
Number of Light Sources> 20
Switch TypeTouch On/Off Switch (Wall switch, remote control options available)
Is DimmableYes (with RC or 2.4G remote control versions)
Lighting Area10-15 square meters (varies by wattage/size)
UsageDaily Lighting, Holiday
FeaturesUltra-thin ceiling lights
TechnicsPerforated
CertificationCE, EMC, ROHS
OriginMainland China

Dimensions and Wattage:

Diameter Wattage Recommended Area
230mm13W1-3 m²
300mm27W3-8 m²
400mm36W8-15 m²
500mm48W15-20 m²
600mm64W15-25 m²
780mm96WNot specified, but likely larger than 600mm

10. User Tips

  • Many users find the installation process straightforward and the light to be very bright.
  • For dimmable versions with 2.4G remote control, the memory function will retain your last light color and brightness settings if the light is turned off for more than 3 minutes.
  • When installing the acrylic lampshade, it may require a slight bend to fit properly.
  • Some users noted that the plastic diffuser can be slightly transparent, revealing internal components.

11. Warranty and Support

  • Warranty Period: 2 years, subject to the purchase certificate.
  • During the warranty period, non-man-made damages are eligible for free repair services.
  • For any issues during installation or use, please contact us through the platform where you made the purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.