1. Introduction
Thank you for choosing the MILESEEY X6 handheld laser distance meter. This device is designed for precise distance measurement with a creative silicon design, offering noteworthy drop-resistance and a super long lifespan. Its 2-inch display provides clear readings day or night. The integrated electronic angle sensor facilitates horizontal alignment with real-time angle measurement. The X6 offers comprehensive measuring functions including Area, Volume, Pythagoras, Auto Level, and Auto Height, meeting diverse measurement needs.
Video: MILESEEY X6 Laser Distance Meter Product Overview and Unboxing.
2. Safety Information
2.1 Laser Safety
WARNING:
- This device is categorized as a Class 2 laser product (<1mW).
- DO NOT shoot the laser directly at eyes, as it may cause damage.
- The product complies with relevant standards and regulations.
2.2 General Safety
- DO NOT use chemical cleaners on the device.
- DO NOT dispose of the product with household waste. Please follow national regulations for proper disposal of electronic devices and batteries.
- DO NOT mix rechargeable batteries with dry batteries.
- Any damage caused by attempting to charge dry batteries is not covered by the warranty.
- If the device heats up during charging, this is normal and will not affect product performance.
- Unplug the charger and remove batteries when not in use for extended periods.
3. Package Contents
The MILESEEY X6 Laser Distance Meter package typically includes:
- Packing Box
- MILESEEY X6 Laser Distance Meter
- Storage Bag
- Instructions Manual
- Certificate (PASS)
- Lanyard
Image: Contents of the MILESEEY X6 Laser Distance Meter package.
4. Device Overview
The MILESEEY X6 features a user-friendly design with clearly labeled buttons and a large LCD display for easy reading.
Image: Front view of the MILESEEY X6 showing the 2-inch LCD display with backlight and HD large screen features.
4.1 Buttons and Functions
- Measure Button (MEAS):
- Short press: Initiates a single distance measurement.
- Long press: Activates continuous measurement mode.
- Menu Button (Grid Icon):
- Press: Changes the measurement mode (e.g., Area, Volume, Pythagoras).
- Add/Subtract Button (+/-):
- Short press: Adds the current measurement to the previous one.
- Long press: Subtracts the current measurement from the previous one.
- Unit/Reference Button (UNIT):
- Short press: Changes the reference point (front or rear of the device).
- Long press: Cycles through measurement units (m, ft, in, ft+in).
- ON/OFF/Clear/Return Button (Power/Clear Icon):
- Long press: Turns the device ON or OFF.
- Short press: Clears the current operation or returns to the previous screen/mode.
4.2 Display Screen
The 2-inch LCD display shows various indicators and measurement values:
- Battery level indicator
- Laser status indicator
- Reference point (front/rear)
- Measurement unit (m, ft, in, ft+in)
- Angle measurement
- Current measurement value
- Maximum/Minimum values (in continuous measurement mode)
- Summary line for calculated values (Area, Volume, etc.)
Image: Detailed view of the MILESEEY X6 display showing various measurement data.
5. Setup
5.1 Battery Installation
The MILESEEY X6 uses AAA rechargeable Ni-MH batteries. To install or replace batteries:
- Locate the battery compartment on the back of the device.
- Open the battery compartment cover.
- Insert the AAA rechargeable Ni-MH batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
Important Note:
- If using dry batteries, DO NOT attempt to charge them.
- DO NOT mix rechargeable batteries with dry batteries.
- The device can be charged via a USB cable, but charging with a computer may take longer.
Image: Battery compartment with AAA batteries.
6. Operating Instructions
6.1 Power On/Off
- To Power On: Long press the ON/OFF/Clear/Return button.
- To Power Off: Long press the ON/OFF/Clear/Return button. The device also features auto power-off after a period of inactivity.
6.2 Unit and Reference Point Selection
- Change Units: Long press the UNIT button to cycle through meters (m), feet (ft), inches (in), and feet+inches (ft+in).
- Change Reference Point: Short press the UNIT button. The default reference point is the rear of the device. You can switch between front and rear reference points.
Image: Instructions for changing measurement units and reference points.
6.3 Measurement Modes
Press the Menu button (grid icon) to select different measurement modes.
6.3.1 Single Distance Measurement
- Power on the device. It will default to single distance measurement mode.
- Aim the laser at the target.
- Short press the MEAS button. The measured distance will be displayed on the summary line.
6.3.2 Continuous Measurement (Max/Min)
- Long press the MEAS button to activate continuous measurement.
- Slowly move the device back and forth or up and down over the intended target point from a fixed measuring point.
- The maximum and minimum distances will be displayed on the screen, along with the current measured value.
6.3.3 Area Measurement
- Press the Menu button to select Area measurement mode.
- Follow the on-screen prompts (flashing lines) to measure the length and width.
- Press MEAS after each measurement. The calculated area will be displayed.
6.3.4 Volume Measurement
- Press the Menu button to select Volume measurement mode.
- Follow the on-screen prompts (flashing lines) to measure length, width, and height.
- Press MEAS after each measurement. The calculated volume will be displayed.
6.3.5 Pythagorean Measurement (2-point and 3-point)
The device can calculate indirect measurements using the Pythagorean theorem.
- Press the Menu button to select the desired Pythagorean mode (2-point or 3-point).
- Follow the on-screen prompts, aiming the laser at the indicated points (hypotenuse, vertical, horizontal) and pressing MEAS for each segment.
- The calculated result will be displayed on the summary line.
Image: Visual guide to different measurement functions.
6.3.6 Auto Level Measurement
This mode uses the electronic angle sensor to automatically calculate horizontal distance.
- Press the Menu button to select Auto Level mode.
- Aim the laser and press MEAS to measure the hypotenuse.
- The horizontal distance will be automatically calculated and displayed.
Image: Electronic level and real-time angle measurement in action.
6.3.7 Auto Height Measurement
Similar to Auto Level, this mode automatically calculates vertical height.
- Press the Menu button to select Auto Height mode.
- Aim the laser and press MEAS to measure the hypotenuse.
- The vertical height will be automatically calculated and displayed.
6.4 Addition and Subtraction Functions
To add or subtract measurements:
- Perform a measurement.
- Short press the +/- button for addition, or long press for subtraction. An appropriate icon (+ or -) will appear on the display.
- Perform the next measurement. The result will be automatically added to or subtracted from the first measurement.
- This process can be repeated as needed for multiple calculations.
Image: Addition and subtraction functions on the MILESEEY X6.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | MiLESEEY |
| Model Number | X6 |
| Measurement Range | 40m, 60m, 80m, 100m (depending on model) |
| Measurement Accuracy | ± 2 mm |
| Laser Hazard Level | Class 2 (<1mW) |
| Power Type | Battery-Powered |
| Battery Type | AAA rechargeable Ni-MH batteries (not included in all versions) |
| Battery Included | No (for some models/packages) |
| Auto Power Off | Yes (after 150 seconds of inactivity) |
| Memory | 30 historical data records |
| Certification | CE, FCC |
| Origin | Mainland China |
| High-concerned chemical | None |
Note on Accuracy: Accuracy is typically ±3mm at a range of 10m. At abnormal temperatures or longer distances, the accuracy may be affected. For example, at 45 degrees, the accuracy is +/-0.95 degrees. Maximum deviation can occur under unfavorable conditions such as bright sunlight or when measuring to poorly reflecting surfaces.
8. Troubleshooting
| Problem | Possible Solution |
|---|---|
| Measurement error/inaccuracy |
|
| Device not powering on |
|
| Display issues (e.g., segment display, no rotation) | The display is segment-based and does not feature screen rotation. This is normal operation. |
| Angle meter shows incorrect values (e.g., 17-20 degrees on a flat surface) | Ensure the device is placed on a perfectly level surface. If issues persist, contact support. |
| Bluetooth connectivity issues (for R2B model) | Ensure your device is the R2B model which supports Bluetooth. The R2 model does not have Bluetooth. |
9. Maintenance
- Keep the device clean and dry.
- Use a soft, damp cloth for cleaning. Avoid chemical cleaners.
- Store the device in its protective storage bag when not in use to prevent damage.
- Remove batteries if the device will not be used for an extended period.
10. User Tips
- For outdoor measurements in bright daylight, consider using a target plate to improve laser visibility and accuracy.
- The device is compact and comes with a storage bag, making it convenient for transport and protection.
- The angle meter can be a useful additional feature for ensuring level measurements.
- Some users have reported receiving a higher range model (e.g., 100m instead of 80m) which can be a pleasant surprise.
11. Warranty and Support
11.1 Warranty Terms
The product comes with a warranty. Please read the safety instructions thoroughly and carefully before using the product for the first time. The warranty may be voided under certain conditions, such as improper use or unauthorized modifications. Any damage caused by attempting to charge dry batteries is not covered by the warranty.
11.2 Limitation of Liability
The manufacturer will not be responsible for damages caused by improper use, actions contrary to the manufacturer's instructions, or modifications/conversions of the product without approval.
11.3 Manufacturer Information
Shenzhen Dongbiankai Technology Co., Ltd.
Company Address: Room 1308, Block A, Zhongshen Garden, No.2010 Caitian Road, Futian Community, Futian Street, Futian District, Shenzhen, China.
Email: sales@mileseey.com
Product specifications are subject to change without notice. All trademarks and product images are the property of Shenzhen Dongbiankai Technology Co., Ltd.