LMoDri F2234

Contents

LMoDri Motorcycle Rear Foot Hydraulic Brake Pump Instruction Manual

Model: F2234

1. Product Overview

This is a high-performance rear brake master cylinder designed for motorcycles and scooters. It converts the mechanical force from the brake pedal into hydraulic pressure, which drives the rear brake caliper to achieve braking. With a built-in fluid reservoir and precision components, it ensures reliable, responsive braking performance.

LMoDri Motorcycle Rear Foot Hydraulic Brake Pump, main view
Figure 1: LMoDri Motorcycle Rear Foot Hydraulic Brake Pump

2. Product Specifications

Item Details
Applicable Vehicles Most motorcycles, scooters, and ATVs with rear hydraulic disc brakes
Body Material High-strength cast alloy (gold finish, anti-corrosion treatment)
Reservoir Type External transparent reservoir with rubber cap, allows visual fluid level check
Connection Standard 10mm banjo fitting (threaded outlet)
Mounting Hole Spacing Universal dual-hole mounting base
Actuation Type Push-rod style with clevis (fork end) for pedal connection
Operating Fluid DOT 3 / DOT 4 brake fluid
Operating Pressure Up to 100 bar (1450 PSI)
Operating Temperature -20°C ~ +120°C
Item Diameter 1cm
Item Weight 266g
Item Length 16cm
External Testing Certification CCC
Model Name F2234
Brand Name LMoDri
Origin Mainland China
Item Type Ropes & Cables
Material Aluminium & High quality Rubber
High-concerned chemical None
Year 0
LMoDri Motorcycle Rear Foot Hydraulic Brake Pump with key dimensions
Figure 2: Key dimensions of the brake pump (2.5cm, 5cm, 3.3cm, 5.6cm, 13.3cm, M10 thread)

3. Core Functions

  • Hydraulic Pressure Generation: Converts foot pedal force into hydraulic pressure for the rear brake system.
  • Fluid Reservoir: Integrated external reservoir provides brake fluid storage and allows quick level checks.
  • Adjustable Actuation: The threaded push rod with clevis allows fine adjustment of brake pedal free play.
  • Sealed Design: Rubber seals prevent fluid leaks and contamination, maintaining stable brake performance.

4. Installation Guide

4.1 Pre-Installation

  • Tools needed: Wrench set, brake line spanner, brake fluid, clean rags, bleed kit.
  • Safety note: Ensure the motorcycle is supported securely and the rear wheel is off the ground.

4.2 Installation Steps

  1. Remove the old master cylinder: Disconnect the brake line and reservoir, then unbolt the old cylinder from the frame.
  2. Mount the new master cylinder: Secure the new cylinder to the mounting bracket using the included bolts.
  3. Connect the brake line: Attach the brake hose to the banjo fitting, ensuring the sealing washer is properly installed to prevent leaks.
  4. Connect the reservoir: Attach the fluid reservoir hose to the master cylinder port, ensuring the clamp is tight.
  5. Adjust the push rod: Thread the clevis to the correct length, then connect it to the brake pedal arm. Adjust the free play to 5-10mm.
  6. Bleed the brake system: Fill the reservoir with DOT 3/DOT 4 brake fluid, then bleed air from the rear brake caliper following standard brake bleeding procedures.
  7. Test operation: Press the brake pedal several times to build pressure. Confirm the brake engages firmly and returns smoothly.

5. Usage & Maintenance

  • Fluid Check: Inspect the brake fluid level in the reservoir monthly. Top up with the correct type of brake fluid if low.
  • Fluid Replacement: Replace brake fluid every 1-2 years, or if it appears dark/contaminated.
  • Seal Inspection: Check for fluid leaks around the master cylinder seals, push rod, and hose connections regularly.
  • Adjustment: Periodically check and adjust the brake pedal free play to maintain optimal braking response.
  • Cleaning: Avoid using harsh chemicals on the cylinder body. Clean with a mild detergent and water, then dry thoroughly.

6. Troubleshooting

Symptom Possible Cause Solution
Spongy/soft brake pedal Air in the system, low fluid level, or worn seals Bleed the brake system, top up fluid, or replace seals
No brake pressure Leaking fluid, disconnected line, or failed master cylinder Inspect for leaks, tighten connections, or replace the master cylinder
Brake drag (brake does not release) Misadjusted push rod, stuck piston, or contaminated fluid Adjust free play, clean the cylinder, or replace fluid
Fluid leaks Damaged seals, loose banjo fitting, or cracked reservoir Replace seals/washer, tighten fittings, or replace the reservoir

7. Safety Warnings

  • Never operate the motorcycle with a faulty brake master cylinder, as this can lead to brake failure and serious accidents.
  • Use only the specified type of brake fluid (DOT 3/DOT 4). Mixing different fluids can cause seal damage.
  • Do not reuse old brake fluid, as it may contain moisture or contaminants that reduce performance.
  • Always bleed the brake system completely after installation to remove air bubbles.

8. User Tips

  • This brake pump is compatible with Motorcycles, ATVs, and Quad Dirt Bikes.
  • Users have reported satisfaction with the product's quality and accurate description.

9. Warranty & Support

For detailed warranty information and technical support, please refer to the official product documentation. A comprehensive user manual in PDF format is available for download: User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.