diymore DC 220V

Contents

DC 220V Liquid Water Level Sensor Right Angle Float Switch Instruction Manual

Model: DC 220V | Brand: diymore

Introduction

The diymore DC 220V Liquid Water Level Sensor Right Angle Float Switch is a reliable device designed to detect and control liquid levels within a tank or container. Its simple working principle and compact design make it suitable for a wide range of applications, including drinking fountains, water heaters, solar systems, air conditioners, humidifiers, bathroom equipment, vending machines, and industrial liquid level control systems. This manual provides essential information for the safe and effective use of your float switch.

Safety Information

  • Always disconnect power before installation, maintenance, or troubleshooting to prevent electrical shock.
  • Ensure all wiring connections are secure and insulated to prevent short circuits.
  • Do not exceed the maximum voltage and current ratings specified for the device.
  • This device is designed for liquid level sensing. Do not use it for purposes other than its intended function.
  • Keep the device away from extreme temperatures outside its operating range to prevent damage.
  • Installation should be performed by qualified personnel if you are unsure about electrical wiring.

Product Overview

The float switch consists of a main body with a threaded section for mounting, a float component, and two electrical wires for connection. The float moves with the liquid level, actuating an internal switch.

Right Angle Float Switch, main view
Main view of the float switch.
Right Angle Float Switch with coiled yellow wires
Float switch with coiled wires.
Right Angle Float Switch with the float component detached
Float switch with float detached.
Right Angle Float Switch with the float component attached
Float switch with float attached.

Product Demonstration Video

A short video demonstrating the physical appearance and components of the float switch.

Specifications

Feature Specification
Brand Namediymore
Model NumberDC 220V
Item TypeSWITCHES
Switch TypePressure Switch (Float Switch)
MaterialPlastic
CertificationCCC
OriginMainland China
Cable Length37.5 cm
Max Breakdown Voltage220V DC
Max Switching Voltage100V DC
Maximum Switching Current0.5 A
Max Load Current1.0 A
Max Contact Resistance100 mΩ
Temperature Rating-10°C to +85°C
Pressure Range0.2 MPa
InstallationTop or bottom mounted vertically
Compatible MediumsWater, oil, chemical medium

For more detailed specifications, please refer to the official user manual PDF: User Manual (PDF).

Installation and Setup

  1. Choose Mounting Location: Select a location on your tank or container where the liquid level needs to be monitored. The float switch can be mounted either from the top or the bottom, depending on your application and desired sensing point.
  2. Prepare Mounting Hole: Drill a hole of appropriate size for the threaded section of the float switch. Ensure the hole is clean and free of burrs.
  3. Insert and Secure: Insert the threaded part of the float switch into the prepared hole. Use the provided nuts and washers to securely fasten the switch in place. Ensure a watertight seal if necessary, using appropriate sealing materials (not included).
  4. Connect Wiring: The float switch has two yellow wires. These wires connect to your control circuit (e.g., pump, indicator, alarm). The switch acts as a simple open/close contact. When the float rises or falls to a certain level, it will change the state of the switch (open or closed). Refer to your control circuit's wiring diagram for specific connections.
    Close-up of the bare ends of the yellow wires
    Bare ends of the yellow wires for electrical connection.
  5. Test Functionality: After installation and wiring, carefully test the float switch by manually raising and lowering the liquid level (or simulating it) to ensure it actuates your connected device as intended.

Operation

The diymore float switch operates based on the buoyancy of its float component. As the liquid level changes, the float moves up or down along the stem. This movement triggers an internal reed switch, changing its electrical state (from open to closed or vice-versa). This change in state can then be used to activate or deactivate an external device, such as a pump to fill or drain a tank, or an alarm to signal a high or low liquid level.

The switch is designed for vertical mounting. The float's position relative to the main body determines the switching point. Ensure the float can move freely without obstruction within the liquid.

Maintenance

  • Regular Cleaning: Periodically inspect the float switch for any buildup of debris, scale, or other contaminants that might impede the float's movement. Clean gently with a soft cloth and appropriate cleaning solution for the liquid medium.
  • Check Connections: Ensure electrical connections remain tight and free from corrosion.
  • Inspect for Damage: Check the float and stem for any physical damage, cracks, or wear that could affect its operation. Replace the unit if significant damage is found.
  • Verify Operation: Occasionally test the switch's functionality to ensure it responds correctly to changes in liquid level.

Troubleshooting

  • Switch Not Actuating:
    • Check electrical connections for looseness or corrosion.
    • Ensure the float is moving freely and not obstructed by debris or tank walls.
    • Verify that the liquid level is reaching the intended activation point of the float.
    • Test the continuity of the switch with a multimeter if possible, to check for internal failure.
  • Intermittent Operation:
    • Clean the float and stem to remove any sticky residues or minor obstructions.
    • Check for voltage fluctuations in the power supply.
  • Leakage at Mounting Point:
    • Ensure the mounting nuts are tightened correctly.
    • Verify that appropriate sealing materials (e.g., rubber washers, thread sealant) were used during installation and are not damaged.

User Tips

  • Temperature Considerations: The float switch has a temperature rating of -10°C to +85°C. Operating the switch in liquids exceeding 85°C, such as boiling water (100°C), may cause damage or melting of the plastic components. Always ensure the liquid temperature is within the specified operating range.
  • Mercury-Free Design: This mini float switch is designed without mercury, making it a safer choice for various applications.
  • Versatile Application: Due to its simple and reliable design, this float switch is highly versatile. Consider its use in custom projects for automatic liquid dispensing, overflow prevention, or low-level alarms in small tanks.

Warranty and Support

For warranty information and technical support, please refer to the seller's official website or contact their customer service directly. Keep your purchase receipt for any warranty claims.

© 2024 diymore. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.