1. Introduction
Thank you for choosing the Mileseey Professional Laser Trena Rangefinder X5/X6. This device is designed for precise distance measurement, offering various functions such as single measurement, continuous measurement, area, volume, and Pythagorean calculations. Please read this manual carefully before use to ensure safe and optimal operation.
2. Safety Information
WARNING: Laser Radiation
- This product is a Class 2 laser device (<1mW).
- Do not stare directly into the laser beam.
- Do not aim the laser at people or animals.
- Do not modify the device.
- Keep the device out of reach of children.
- Avoid using the device in potentially explosive environments.
- Keep away from medical devices.
- Dispose of batteries and the device according to local regulations.
3. Package Contents
Upon opening your Mileseey Laser Rangefinder package, please ensure all items are present and in good condition:
- Mileseey Laser Distance Meter (X5 or X6 model)
- USB Cable (for X6-chargeable models)
- Rechargeable Batteries (for X6-chargeable models) or standard AAA batteries (not included for X5 and X6-no-charge models)
- Protective Bag
- User Manual (this document)
- Certificate

4. Product Overview
Familiarize yourself with the device's components and controls:

- Display Screen: Shows measurements, battery status, and function icons.
- Function Keys: Access various measurement modes (Area, Volume, Pythagorean, etc.).
- Switch Machine (Power Button): Turns the device ON/OFF.
- Benchmark/Unit Key: Changes the measurement reference point (front/rear) and measurement units (m/ft/in).
- Measurement Key (MEAS): Activates the laser and initiates measurements.
- Plus/Minus Keys (+/-): Used for addition and subtraction of measurements.
- Historical Data/Mute Key: Accesses historical measurements and toggles mute mode.

5. Specifications
| Feature | Specification |
|---|---|
| Measurement Range | 40m / 60m / 80m / 100m (depending on model) |
| Measurement Accuracy | ±2mm |
| Laser Class | Class II |
| Laser Type | 630-670nm, <1mW |
| Automatic Laser Shut-off | 20 seconds |
| Automatic Device Shut-off | 3 minutes of inactivity |
| Historical Memory | 20 sets |
| Power Type (X5) | 2* AAA battery (not included) |
| Power Type (X6-no-charge) | 3* AAA battery (not included) |
| Power Type (X6-chargeable) | 3* AAA rechargeable battery (included) |
| Size | 116*52*28mm |
| Certification | CE, FCC |
| High-concerned chemical | None |
6. Setup
6.1. Battery Installation
- Locate the battery compartment cover on the back of the device.
- Slide or open the cover.
- Insert the required batteries:
- For X5 models: 2 x AAA batteries (not included).
- For X6-no-charge models: 3 x AAA batteries (not included).
- For X6-chargeable models: 3 x AAA rechargeable batteries (included).
- Close the battery compartment cover securely.
6.2. Powering On/Off
- To Power On: Press the U (Power) button. The device will turn on and display the last measurement mode.
- To Power Off: Press and hold the U (Power) button for approximately 2 seconds. The device will also automatically shut down after 3 minutes of inactivity to save power.

7. Operation
7.1. Adjusting Measurement Reference
The default measurement reference point is from the rear of the instrument. To change the reference point (e.g., to measure from the front of the device), press the Benchmark/Unit key. An icon on the display will indicate the current reference point.
7.2. Changing Measurement Units
To cycle through available measurement units (meters, feet, inches), press and hold the Benchmark/Unit key.
7.3. Basic Measurement Functions

- Single Measurement:
Press the MEAS button once to activate the laser. Aim the laser at the target point. Press MEAS again to take the measurement. The result will be displayed on the screen. - Continuous Measurement:
Press the MEAS button once to activate the laser, then press and hold MEAS for 2 seconds. The device will continuously measure, displaying the maximum, minimum, and current values. Press CLEAR to stop. - Area Measurement:
Press the Function key once. The display will show an icon for area measurement. Measure the length, then the width. The device will calculate and display the area. - Volume Measurement:
Press the Function key twice. The display will show an icon for volume measurement. Measure the length, width, and height. The device will calculate and display the volume. - Pythagorean Measurement (Indirect Measurement):
- First Pythagorean: Press the Function key three times. Measure the hypotenuse, then one of the legs. The device will calculate the unknown leg.
- Second Pythagorean: Press the Function key four times. Measure the hypotenuse, then the two legs. The device will calculate the unknown height.
- Automatic Level/Vertical:
Press the Function key five times for Automatic Level or six times for Automatic Vertical. Follow the on-screen prompts to measure.
7.4. Historical Memory
- To view previous measurements, press the Historical data/mute key. The device stores up to 20 sets of data.
- To delete historical data, press and hold the Historical data/mute key.
7.5. Mute Function
Press the Historical data/mute key briefly to toggle the sound (mute/unmute) of the device.
8. Maintenance
- Clean the device with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Keep the laser lens clean to ensure accurate measurements.
- Store the device in its protective bag when not in use.
- Remove batteries if the device will not be used for an extended period to prevent leakage.
- Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
9. Troubleshooting
| Error Code | Description | Solution |
|---|---|---|
| 204 | Battery low | Replace or recharge batteries. |
| 208 | Operating temperature too high/low | Operate within specified temperature range (0°C to 40°C). |
| 220 | Signal too weak/strong | Ensure target surface is reflective and within range. Avoid strong light interference. |
| 252 | Outside of measurement range | Measure within the specified range of the device. |
| 253 | Calculation error | Re-measure or simplify the calculation. |
| 255 | Laser beam blocked | Ensure a clear line of sight to the target. |
10. User Tips
- For outdoor measurements in bright sunlight, the effective range might be reduced. Users report good performance up to 30-40 meters in bright conditions, while 100-meter measurements are more reliable in darker environments.
- The device offers selectable reference points (from the front or the rear of the device), which is useful for different measurement scenarios.
- The X6 model includes an electronic angle meter, which can be helpful for certain applications, though some users note a small inherent error.
- While the device is generally accurate, ensure the target surface is suitable for laser reflection to avoid 'signal too weak/strong' errors.
11. Frequently Asked Questions (FAQ)
- Q: What are the benefits of using this laser rangefinder?
- A: The benefits include precise measurements with an accuracy of ±2mm and the convenience of battery-powered operation.
- Q: What are the key features of this device?
- A: Highlights include historical memory for 20 sets of data and durable soft rubber buttons for comfortable use.
- Q: What is the difference between the X5 and X6 models?
- A: The primary differences lie in battery configuration and potentially additional features like angle measurement on the X6. X5 models typically use 2x AAA batteries, while X6 models use 3x AAA batteries, with some X6 variants offering rechargeable options.
- Q: Is calibration possible for the device?
- A: The user manual does not detail a user-accessible calibration mode. The device is factory calibrated for accuracy.
12. Warranty and Support
This Mileseey product is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included in your package for specific terms, conditions, and duration of coverage. For technical support or service inquiries, please contact your retailer or the official Mileseey support channels.
Manufacturer: Shenzhen Mileseey Technology Co., Ltd.