1. Introduction
This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your HONGWIN Idle Air Control (IAC) Valve. The IAC valve is a critical component in your vehicle's engine management system, regulating the amount of air bypassing the throttle plate to maintain a stable idle speed. Proper installation and care will ensure optimal performance and longevity of the part.
For a detailed user manual in PDF format, please refer to the official PDF document.
2. Product Overview
2.1 Components
The HONGWIN Idle Air Control Valve consists of a metallic valve body and an integrated electrical connector. A gasket is typically included for proper sealing during installation.

Figure 1: Idle Air Control Valve (Model 35150-02800) in packaging with gasket.

Figure 2: Side view of the IAC Valve, highlighting the electrical connector.

Figure 3: Bottom view of the IAC Valve, showing mounting points.
2.2 Compatibility
This Idle Air Control Valve is designed for the following vehicle models:
- HYUNDAI MATRIX: 2008 models
- HYUNDAI I10 1.1: 2008 models
- KIA Picanto: 2007-2010 models (G4HE engine)
Please verify the model number and dimensions against your vehicle's existing part before installation to ensure proper fitment.
3. Installation and Setup
Installation of an Idle Air Control Valve typically involves working with vehicle engine components. It is highly recommended that installation be performed by a qualified automotive technician.
3.1 Pre-Installation Checks
- Ensure the vehicle's ignition is off and the battery is disconnected.
- Confirm that the new IAC valve matches the dimensions and model type of the original part.
- Inspect the new valve for any visible damage.
- Ensure you have the correct tools for removal and installation.

Figure 4: Side view with critical dimension (7mm/0.276").
3.2 Installation Steps (General Guidance)
- Locate the existing Idle Air Control Valve on your vehicle's engine. It is typically mounted on the throttle body.
- Carefully disconnect the electrical connector from the old valve.
- Remove the mounting screws or bolts securing the old valve.
- Remove the old valve and its gasket. Clean the mounting surface thoroughly to ensure a proper seal.
- Place the new gasket onto the mounting surface or the new IAC valve.
- Position the new HONGWIN IAC valve and secure it with the mounting screws/bolts. Tighten to manufacturer specifications.
- Carefully connect the electrical plug to the new valve. Ensure it clicks securely into place.
- Reconnect the vehicle battery.
- Start the engine and check for proper idle operation. The engine control unit (ECU) may need a short period to relearn the new valve's parameters.
Important: Take care when handling the electrical plug to avoid damage to the pins or housing.
4. Operation
The Idle Air Control Valve operates automatically as part of your vehicle's engine management system. It receives signals from the Engine Control Unit (ECU) to adjust the amount of air bypassing the throttle plate. This adjustment ensures a consistent and stable engine idle speed under various conditions, such as when the air conditioning is on, or when the engine is cold.
No manual intervention is required for the operation of this component once correctly installed.
5. Maintenance
The HONGWIN Idle Air Control Valve is designed for long-term reliability and typically requires minimal maintenance. However, regular vehicle maintenance can help prolong its lifespan:
- Engine Air Filter: Ensure your engine air filter is clean and replaced regularly according to your vehicle manufacturer's recommendations. A dirty air filter can affect engine airflow and potentially strain the IAC valve.
- Throttle Body Cleaning: Periodically clean the throttle body, especially around the IAC valve's passage, to prevent carbon buildup that can impede valve movement.
- Wiring Inspection: During routine checks, inspect the electrical connector and wiring for any signs of wear, corrosion, or damage.
6. Troubleshooting
If you experience issues related to engine idle, the IAC valve might be a contributing factor. Common symptoms of a faulty IAC valve include:
- Rough or Unstable Idle: The engine RPM fluctuates significantly when idling.
- Stalling: The engine stalls, especially when coming to a stop or when the air conditioning is engaged.
- High Idle Speed: The engine idles at an unusually high RPM.
- Low Idle Speed: The engine idles too low, sometimes leading to stalling.
- Check Engine Light: The Check Engine Light may illuminate, often accompanied by specific diagnostic trouble codes (DTCs) related to idle control.
If you encounter these symptoms, it is recommended to:
- Consult your vehicle's service manual for specific diagnostic procedures.
- Have the vehicle scanned for diagnostic trouble codes (DTCs) by a qualified technician.
- Inspect the IAC valve's electrical connection and wiring.
- Consider professional diagnosis and replacement if the valve is confirmed to be faulty.
7. User Tips
- Verify Compatibility: Always double-check the model numbers and vehicle compatibility (e.g., Hyundai i10 1.1, Kia Picanto 07-10) to ensure the part is correct for your specific vehicle year and engine type.
- Professional Installation: While some users may attempt DIY installation, given the critical role of this part in engine function, professional installation is highly recommended to ensure correct fitment and avoid potential issues.
- Post-Installation ECU Relearn: After replacing the IAC valve, your vehicle's Engine Control Unit (ECU) may need to relearn the new valve's operating parameters. This often involves driving the vehicle for a short period or performing a specific relearn procedure outlined in your vehicle's service manual.
8. Specifications
| Attribute | Detail |
|---|---|
| Product Name | Auto Valve (Idle Air Control Valve) |
| Brand | HONGWIN |
| Model Numbers (OEM) | 35150-02800, 35150 02800, 3515002800, 9520930007, 9521930709 |
| Material | Magnet / PA66-GF30 / Copper |
| Origin | Mainland China |
| Package Length | 10 cm |
| Package Width | 10 cm |
| Package Height | 10 cm |
| Package Weight | 0.3 kg |
9. Warranty & Support
9.1 Warranty
This HONGWIN Idle Air Control Valve comes with a ONE YEAR warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product meets original quality standards. Please retain your proof of purchase for warranty claims.
9.2 Manufacturer Contact Information
- Manufacturer: Wenzhou Haowei Auto Parts Co., Ltd.
- Customer Service Email: inf@hwautoparts.com
- Telephone: +86-18005775583
- Address: Floor 2, Building 8 (West), Hantian Hardware and Electrical City, Tangxia Town, Ruian City, Zhejiang Province, China
10. Safety Information
WARNING: To avoid danger of suffocation, keep this plastic bag away from babies and children. Do not use this bag in cribs, beds, carriages, or play pens. This bag is not a toy.
When working on your vehicle, always follow general automotive safety practices, including:
- Wearing appropriate personal protective equipment (e.g., safety glasses, gloves).
- Ensuring the vehicle is securely supported if lifted.
- Disconnecting the battery before working on electrical components.
- Allowing the engine to cool down before handling hot components.