1. Introduction
This manual provides instructions for the installation and use of the Biurlink 12-Pin Aftermarket Camera Input Video Harness. This harness is designed to integrate an aftermarket reverse backup camera with compatible car stereo systems in various Volkswagen and Skoda models, utilizing a 12-pin MIB interface and an RCA video input.
Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
2. Safety Precautions
- **Professional Installation Recommended:** Installation of car electronics can be complex. It is highly recommended to have this harness installed by a qualified professional to avoid damage to your vehicle's electrical system or the product itself.
- **Disconnect Power:** Always disconnect the vehicle's battery before performing any electrical work to prevent short circuits and electrical shock.
- **Vehicle Compatibility:** Ensure the harness is compatible with your specific vehicle model and head unit before attempting installation.
- **Cable Routing:** Route cables carefully to avoid interference with moving parts, sharp edges, or heat sources. Secure all connections to prevent accidental disconnection.
- **Road Safety:** Never attempt to view the camera feed or adjust settings while driving. Always prioritize road safety.
- **Environmental Protection:** Keep the harness and connectors away from water, excessive moisture, or extreme temperatures to prevent damage.
3. Specifications
| Feature | Specification |
|---|---|
| Condition | 100% Brand New |
| Brand Name | Biurlink |
| Model Name | fakra port |
| Item Type | Cables, Adapters & Sockets |
| Special Features | car fakra transfer |
| Interface | mib (12-Pin), RCA Socket |
| Cable Length | 23cm (Item Size) / 34cm (from PDF, likely overall length) |
| Item Weight | 16g |
| Voltage | 5V |
| Out Power | 6 |
| Material | ABS |
| Car Make Compatibility | For VW, VOLKSWAGEN, SKODA (also listed: Toyota, Honda, AUDI, Benz, Suzuki, Nissan, Porsche, Ford, Fiat, Acura, BMW, Volvo, Mazda, Peugeot, Renault, Citroen, Opel) |
| Origin | Mainland China |
4. Package Contents
The package should contain the following items:
- 1 x 12-Pin Aftermarket Camera Input Video Harness
- 1 x User Manual (this document or a similar guide)
5. Setup and Installation
This harness allows you to connect an aftermarket reverse camera to your car's head unit. The installation process typically involves accessing the rear of your car's stereo system. Due to variations in vehicle models and head units, specific steps may differ. Professional installation is highly recommended.
General Installation Steps:
- **Prepare the Vehicle:** Ensure the vehicle is turned off and the battery is disconnected to prevent electrical damage.
- **Access Head Unit:** Carefully remove the trim panels and screws necessary to access the rear of your car's head unit (stereo system). Refer to your vehicle's service manual for specific instructions.
- **Locate MIB Port:** Identify the compatible 12-pin MIB (Modular Infotainment Baukasten) port on the back of your head unit. This port is typically used for video input.
-
**Connect Harness to Head Unit:** Plug the blue 12-pin connector of the video harness into the corresponding MIB port on your car's head unit.
Image: Close-up of the 12-Pin MIB connector, showing its design for connection to the car's head unit. -
**Connect to Reverse Camera:** Connect the yellow RCA female connector of the video harness to the male RCA video output cable from your aftermarket reverse camera.
Image: Close-up of the RCA female connector, ready to receive the video signal from a reverse camera. - **Power and Signal Wires (Camera):** Ensure your reverse camera is properly powered and its trigger wire (if applicable) is connected to the reverse light circuit, so the head unit automatically switches to the camera view when reverse gear is engaged. (This harness primarily handles the video signal, not camera power or trigger).
- **Test Connection:** Before reassembling the dashboard, reconnect the car battery and test the camera functionality. Engage reverse gear to see if the camera feed appears on your head unit screen.
- **Reassemble:** Once confirmed working, carefully reassemble all removed panels and secure the head unit.
6. Operating Instructions
Once the Biurlink 12-Pin Aftermarket Camera Input Video Harness and your reverse camera are correctly installed and configured:
- **Start Vehicle:** Turn on your vehicle's ignition.
- **Engage Reverse Gear:** Shift your vehicle into reverse gear.
- **Automatic Display:** The car's head unit should automatically switch to display the video feed from the connected reverse camera.
- **Disengage Reverse Gear:** When you shift out of reverse gear, the head unit will typically return to its previous display mode (e.g., radio, navigation).
If your head unit does not automatically switch, check its settings for options related to reverse camera input activation.
7. Maintenance
- **Regular Inspection:** Periodically check the cable connections for any signs of wear, corrosion, or looseness.
- **Cleanliness:** Keep the connectors clean and free from dust or debris. Use a dry, soft cloth for cleaning.
- **Avoid Stress:** Do not pull on the cables or connectors forcefully. Ensure they are not bent sharply or subjected to excessive tension.
- **Environmental Protection:** Protect the harness from extreme temperatures, direct sunlight, and moisture, especially in areas where it might be exposed to the elements.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No camera image on screen when in reverse. |
|
|
| Image is distorted or flickering. |
|
|
9. User Tips
- **Compatibility Check:** While the product lists broad compatibility, always double-check with your specific car model and head unit's specifications. For example, users have inquired about compatibility with models like the Peugeot 307, which is listed as compatible.
- **Online Resources:** If you encounter difficulties, search for vehicle-specific installation guides or videos for your car model and head unit. Many online communities offer valuable insights.
10. Warranty and Support
For product support, technical assistance, or warranty inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
An additional user manual in PDF format may be available for download. Please refer to the product page or contact customer service for access to this document: View PDF Manual.