1. Introduction
The RETEKESS TD165 Wireless Coaster Pager Receiver is an integral part of a guest paging system designed to enhance efficiency and service in various establishments such as restaurants, coffee houses, pizza shops, and clinics. This system helps minimize waiting line crowds, improve staff coordination, and provide faster notifications to customers.
How the System Works
- Guests place an order and receive a coaster pager, each with a unique number (1-999).
- When the order is ready, staff at the counter use a numeric keypad transmitter to call the pager's number.
- The pager receives the wireless signal and alerts the guest through vibration, LED flashing, or beeping, indicating their order is ready for pickup.
Benefits of Using the System
- Minimizes crowds in waiting lines.
- Reduces staff chaos and improves ambiance.
- Notifies guests faster.
- Reduces staff costs.
- Improves work efficiency.
- Enhances the establishment's image.
2. Product Overview: TD165 Coaster Pager Receiver
The TD165 Coaster Pager is a portable, user-friendly device with a novel design, widely used in various service environments. Each pager works with one keypad transmitter, and a single transmitter can manage up to 999 pagers.
Pager Features
- Tube Size: 15x10 mm
- LED Display: 3-digit RED LED
- Shell Material: High-quality polycarbonate
- Prompt Modes: Flash, Beep, Vibration, or any combination thereof.
- Frequency: 433.92MHz
- Dimensions: 80x73x15 mm
- Power: Built-in 3.7V rechargeable lithium battery (280mAh)
- Charging Period: 3 hours
- Weight: 59g / 0.13lb


3. Setup and Configuration
3.1. Function Keys and Instructions (Pager)
The function keys "Mode" and "Learn" on the back of the pager can be activated using a pinpoint tool (e.g., a paperclip).

- MODE: Short press with a pinpoint tool to cycle through prompt modes: Vibration, Beep, or Vibration + Beep.
- LEARN:
- Short press to enter pairing mode.
- Long press to delete the programmed ID.
- STOP: Long press for 2 seconds to turn the pager ON/OFF.
- RESET: If the pager crashes, press the RESET button to restart it.
3.2. Setting Pager ID (Pairing)
To assign an ID to your pager and pair it with the transmitter:
- Touch the "LEARN" key on the back of the pager using a pinpoint tool. The pager's LED will start flashing.
- On the numeric keypad transmitter, enter the desired pager number (1-999).
- Press the "ENTER" button on the transmitter.
- The registration is successful when the entered number is displayed on the pager's screen. The ID can be changed in the same manner.
3.3. Setting Prompt Mode
The pager offers three prompt modes: Vibration, Beep, or a combination of Vibration + Beep. To select a mode:
- Touch the "MODE" button on the back of the pager with a pinpoint tool.
- The pager will display the current prompt mode.
- Continue pressing the "MODE" button to cycle through and select your desired prompt mode.
4. Operating Instructions
4.1. Receiving a Call (Working Test)
After successfully pairing the pager:
- On the keypad transmitter, enter the pager's assigned number.
- Press "ENTER" on the transmitter.
- The pager will activate its set prompt mode (vibrate, flash, or beep).
- To stop the reminder, press the "STOP" button on the back of the pager.
Video 1: Demonstration of the paging system's setup, pairing, and basic call operation.
5. Maintenance
5.1. Battery Charging
It is recommended to keep the pagers on the charging base when not in use to ensure they are always ready.
- When the pager emits a beep and the blue LED flashes once per second, it indicates a low battery and needs to be charged.
- During charging, the blue LED will flash once per second.
- When fully charged, the blue LED light will remain on.
- If you need to locate a pager that is currently charging, call its number from the transmitter. The pager's red LED light will flash to indicate it's being called.

5.2. Deleting Programmed ID
To clear a pager's assigned ID:
- Long press the "LEARN" button on the back of the pager.
- The red LED will flash simultaneously.
- Release the button when you hear a beep from the pager. This confirms the ID has been successfully deleted.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Pager on charging base, but LED screen does not display. | Power adapter failure. | Replace the power adapter. |
| Receiving distance is greatly shortened. | Pager battery is low. | Charge the pager in time. |
| Pager cannot receive signal from keypad transmitter. | Pager has not been paired with the keypad or is out of range. | Pair the pager with the keypad. Test in a short distance. |
7. Safety Information
RF Energy Exposure and Product Safety Guide
ATTENTION! Before using this radio, read this guide which contains important operating instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulations.
This radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications. RF energy, when used improperly, can cause biological damage. All Retekess radios are designed, manufactured, and tested to ensure they meet government-established RF exposure levels. Manufacturers also recommend specific operating instructions to users of the radios. These instructions are important because they inform users about RF energy exposure and provide simple procedures on how to control it.
For more information on RF energy exposure and how to control your exposure, refer to: http://www.who.int/en/
Unauthorized Modification and Adjustment
Changes or modifications not expressly approved by the party responsible for compliance may void the user's authority to operate this radio and should not be made. Transmitter adjustments should be made only by or under the supervision of a technically qualified person.
FCC Requirements
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CE Requirements
Henan Eshow Electronic Commerce Co., Ltd declares that the radio equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU; the full text of the EU declaration of conformity is available at the following internet address: www.retekess.com.
Disposal: The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union, all electrical and electronic products, batteries, and accumulators (rechargeable batteries) must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area.
IC Requirements
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Avoid Choking Hazard
Small Parts. Not for children under 3 years.
Avoid Burns
- Antennas: Do not use any portable radio that has a damaged antenna. If a damaged antenna comes into contact with the skin when the radio is in use, a minor burn can result.
- Batteries: Exercise care in handling any battery, particularly when placing it inside a pocket, purse or other container with metal objects, as conductive material touching exposed terminals can cause a short circuit and heat.
- Long Transmission: When the transceiver is used for long transmissions, the radiator and chassis will become hot.
Safety Operation
- Do not use charger outdoors or in moist environments; use only in dry locations/conditions.
- Do not disassemble the charger; that may result in risk of electrical shock or fire.
- Do not operate the charger if it has been broken or damaged in any way.
- Do not place a portable radio in the area over an air bag or in the air bag deployment area. The radio may be propelled with great force and cause serious serious injury to occupants of the vehicle when the air bag inflates.
- Pull by the plug rather than the cord when disconnecting the charger.
- Unplug the charger from the AC outlet before attempting any maintenance or cleaning.
- The adapter shall be installed near the equipment and shall be easily accessible.
- Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
- The operating temperature of the EUT can't exceed the specified range.
Approved Accessories
This radio meets the RF exposure guidelines when used with the Retekess accessories supplied or designated for the product. Use of other accessories may not ensure compliance with the RF exposure guidelines and may violate regulations. For a list of Retekess-approved accessories for your radio model, visit the following website: http://www.Retekess.com
8. User Tips
- System Expansion: If you need more pagers for your system, ensure they are compatible with your existing Retekess keypad transmitter.
- Range Optimization: For best signal reception, ensure the pager is within the specified operating range of the transmitter (300-500 meters in open areas). Obstacles like walls can reduce this range.
- Battery Management: Always return pagers to the charging base when not in active use to maximize battery life and ensure they are ready for the next customer.
9. Warranty and Support
Most new products carry a two-year manufacturer's warranty from the date of purchase.
How to Obtain Warranty and After-Sales Service:
- Contact the seller where you purchased the product.
- Products repaired by our Local Repair Center.
For warranty service, you will need to provide a receipt or proof of purchase from the actual seller for verification.
Exclusions from Warranty Coverage:
- Any product damaged by accident.
- Misuse or abuse of the product, or damage resulting from unauthorized alterations or repairs.
- If the serial number has been altered, defaced, or removed.
For further assistance, you can contact Retekess directly via their website: www.retekess.com or email: support@retekess.com.
EU Importer: Germany Retevis Technology GmbH, Uetzenacker 29, 38176 Wendeburg