1. Introduction
This manual provides detailed instructions for the installation, operation, and troubleshooting of your Fenvi M.2 to PCI Express Wireless Adapter. This adapter allows you to integrate an M.2 Wi-Fi card (such as WLAN, WWLAN, or Bluetooth modules) into a standard PCI-e slot on your desktop computer, enabling high-speed wireless connectivity and Bluetooth functionality.
2. Safety & Warnings
Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Warning: Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
3. Product Overview
The Fenvi FV-102 is an M.2 to PCI Express adapter designed to bring modern wireless capabilities to your desktop PC. It supports various M.2 Wi-Fi cards, including Intel AX200, AX210, 9260, and 8265NGW, offering Wi-Fi 6E and Bluetooth 5.3 connectivity.
Key Features:
- Converts M.2 Wi-Fi cards (WLAN, WWLAN, BT) to standard PCI-e 1X x4 x8 x16 slots.
- Includes two 6dBi external antennas for enhanced signal strength and 360-degree rotation.
- Gold-plated antenna connectors for zero impedance.
- 3U black immersion gold PCB board for reliable connection.
- Compatible with Intel AX210 / AX200 / 9260 / 8265NGW M.2 Wi-Fi modules.
- Supports both half-size and full-size M.2 Wi-Fi modules.
Package Contents:
The standard package includes the following components:
- 1 x PCIE Converter board (FV-102)
- 1 x Low Profile Bracket
- 1 x Bluetooth cable
- 2 x Antennas
Note: The package does NOT include the M.2 Wi-Fi card itself. This product is an adapter only.
4. Specifications
| Attribute | Value |
|---|---|
| Brand Name | fenvi |
| Model Number | AX210NGW (Adapter supports various M.2 cards) |
| Product Name | M.2 wifi card To PCI-E Wireless Card Adapter |
| Type | Wireless |
| Application | Desktop |
| Interface Type | PCI Express |
| Adapter Socket | PCI-E |
| Wired Socket | NGFF (M.2) |
| Wi-Fi Supported Frequency | 2.4G & 5G (Dual-Band) |
| Wireless Communication Standard | 802.11.ax (Wi-Fi 6/6E) |
| Wireless Protocol | 802.11a/g, 802.11n, 802.11ac, 802.11ax |
| Bluetooth Protocol | Bluetooth 5.3 |
| Wireless Transmission Rate | Up to 3000M (depending on M.2 card) |
| Antenna | 2*6DBI |
| Heat Dissipation | No support (adapter itself, M.2 card may have heatsink) |
| Compatible M.2 Cards | WIFI 6E AX210; Intel AX200, Intel 9260, Intel 8265, etc. |
| Dimensions | 70x75x14mm (approximate) |
| Certification | CE, UKCA, FCC |
5. Setup Instructions
5.1. Pre-installation Checklist
- Ensure your computer is powered off and unplugged from the wall outlet.
- Open your computer case to access the motherboard.
- Locate an available PCI Express slot (x1, x4, x8, or x16).
- Ensure you have a compatible M.2 Wi-Fi card (e.g., Intel AX200, AX210, 9260, 8265NGW) ready for installation into the adapter.
5.2. Installing the M.2 Wi-Fi Card onto the Adapter
- Carefully insert your M.2 Wi-Fi card into the NGFF (M.2) slot on the Fenvi FV-102 adapter board.
- Secure the M.2 card with the provided screw.
5.3. Installing the Adapter into the PCIE Slot
- Align the Fenvi FV-102 adapter (with the M.2 card installed) with an available PCI Express x1 slot on your motherboard. The adapter is compatible with x4, x8, and x16 slots as well.
- Gently push the adapter down until it is firmly seated in the slot.
- Secure the adapter to your PC case with a screw.
5.4. Connecting the Bluetooth Cable
For Bluetooth functionality, the included black USB cable must be connected:
- Connect one end of the Bluetooth cable to the designated header on the Fenvi FV-102 adapter board.
- Connect the other end of the Bluetooth cable to an available USB 2.0 header on your motherboard.
5.5. Attaching the Antennas
- Screw the two 6dBi antennas onto the gold-plated connectors on the adapter's bracket.
- Adjust the antennas for optimal signal reception.
5.6. Driver Installation
After physical installation, close your computer case, plug it back in, and power it on. For the M.2 Wi-Fi card to function correctly, you will need to install the appropriate drivers. Please obtain the corresponding driver from the official website of your M.2 Wi-Fi card manufacturer (e.g., Intel for AX200/AX210 cards).
6. Operation
Once the adapter and M.2 Wi-Fi card are correctly installed and drivers are in place, your desktop PC will have access to high-speed Wi-Fi and Bluetooth connectivity.
- Wi-Fi Connectivity: Your computer should detect available Wi-Fi networks. Connect to your desired network as you would with any other wireless adapter. The 6dBi antennas provide great signal strength for high-speed connections.
- Bluetooth Functionality: Ensure the Bluetooth cable is connected to enable Bluetooth. You can then pair Bluetooth devices (e.g., headphones, keyboards, mice) through your operating system's Bluetooth settings.
7. Maintenance
The Fenvi M.2 to PCI Express Wireless Adapter requires minimal maintenance. Keep the area around your computer's PCI-E slots clear for proper airflow. Periodically check that the antennas are securely attached and positioned for optimal signal. If you experience connectivity issues, ensure all connections are firm and free from dust.
8. Troubleshooting
- No Wi-Fi or Bluetooth detected:
- Ensure the adapter is fully seated in the PCI-e slot.
- Verify that the M.2 Wi-Fi card is correctly installed on the adapter.
- Confirm that the Bluetooth cable is securely connected to both the adapter and the motherboard's USB header.
- Install the correct drivers for your specific M.2 Wi-Fi card from the manufacturer's official website.
- Slow Wi-Fi speeds:
- Ensure antennas are properly attached and oriented.
- Check for interference from other wireless devices.
- Update your Wi-Fi card drivers.
- Verify your router supports the Wi-Fi standard (e.g., Wi-Fi 6/6E) and frequency (2.4G/5G) of your M.2 card.
- Bluetooth not working:
- Double-check the Bluetooth cable connection to both the adapter and the motherboard.
- Ensure Bluetooth drivers are installed.
- Check your operating system's Bluetooth settings to ensure it's enabled.
- Adapter not recognized by the system:
- Ensure your motherboard's BIOS/UEFI is up to date.
- Check if the PCI-e slot is enabled in BIOS/UEFI settings.
9. User Tips
- Compatibility Check: When choosing an M.2 Wi-Fi card for this adapter, note that cards like AX200, AX210, and 9260 rely on standard PCIe. However, cards like 9461, 9462, AX201, and AX211 use Intel's proprietary CNVio interface and are generally not compatible with universal M.2 to PCIe adapters.
- Driver Source: Always download the latest drivers directly from the official website of your M.2 Wi-Fi card's manufacturer (e.g., Intel's support website).
- System Compatibility: For Intel 9560 modules, compatibility often depends on the CPU generation. Some users report it works best with 8th generation Intel CPUs and newer. For older generations (6th, 7th), Intel 9260 might be a more suitable choice.
- AMD Motherboards: The adapter is generally compatible with AMD motherboards, provided the M.2 Wi-Fi card itself is compatible with the system's CPU generation and drivers are available.
10. Frequently Asked Questions (FAQ)
- Q: What functions does this wireless card adapter offer?
- A: This adapter allows your M.2 Wi-Fi card to provide fast Ethernet transmission rates and supports modern Wi-Fi standards like Wi-Fi 6E, along with Bluetooth functionality.
- Q: Which devices is this wireless card adapter compatible with?
- A: It is compatible with desktop PCs that have an available PCI Express slot.
- Q: What are the highlights of this product?
- A: Highlights include its ability to convert M.2 Wi-Fi cards to PCIe, support for high transmission speeds (up to 3000 Mbps depending on the M.2 card), and support for both 2.4G and 5G frequencies with Bluetooth 5.3.
- Q: What type of interface does this adapter have?
- A: The adapter connects to your motherboard via a PCI Express interface and provides an NGFF (M.2) slot for the Wi-Fi card.
- Q: What are the benefits of using this adapter?
- A: Using this adapter allows your desktop device to enjoy fast wireless connectivity and reliable Bluetooth functionality by utilizing high-performance M.2 Wi-Fi cards.
- Q: Is the PCIE adapter compatible with Intel 9560?
- A: Yes, it can be compatible, but Intel 9560 modules often require 8th generation Intel CPUs or newer. For older CPU generations, an Intel 9260 module might be more suitable.
- Q: Does an ASUS motherboard support this card?
- A: Yes, generally, as long as the motherboard has an available PCI Express slot and the CPU is compatible with the M.2 Wi-Fi card you intend to use with the adapter.
- Q: Will Intel 9260 work on this card, on i5-7600/H170?
- A: Yes, the Intel 9260 is known to work well with older generations like i5-7600/H170 setups.
11. Warranty & Support
For warranty information and technical support, please contact the manufacturer:
Manufacturer: Shenzhen Fenvi Technology Co., LTD.
Address: 401 North Block, Beier Road, Hi-tech Industrial Park, Bantian Subdistrict, Longgang District, Shenzhen, Guangdong Province, China
Phone: 0755-83628485
EU Authorized Representative: E-CrossStu GmbH
Address: Mainzer Landstr.69
Email: e-crossstu@outlook.com
Phone: +49-69332967674
For additional documentation, including a user manual in PDF format, please refer to the following link: View User Manual (PDF)