1. Introduction
Thank you for choosing the SinoTrack ST-901M Mini GPS Tracker. This manual provides detailed instructions for the proper installation, operation, and maintenance of your device. Please read this manual thoroughly before using the tracker to ensure optimal performance and safety.

Figure 1: SinoTrack GPS Tracker with mobile application interface.
2. Key Features
- Real-time Tracking
- History Route Playback
- Remote Fuel Cut-off (via Relay)
- Geo-fence Functionality
- Shocking Alarm
- Sleep Mode for Power Saving
- Overspeed Alarm
- No Built-in Battery (requires external power)

Figure 2: SinoTrack ST-901M dimensions (7.5cm x 2.5cm) and key features.
3. Setup Guide
3.1. SIM Card Preparation
- Choose a standard GSM SIM card without a PIN code. Micro SIM and Nano SIM cards are not directly compatible; use an adapter if necessary.
- Ensure the SIM card has sufficient credit for SMS and GPRS data services.
3.2. SIM Card Insertion
- Carefully open the top cover of the tracker (if applicable, some models are sealed).
- Insert the prepared GSM SIM card into the SIM card slot with the correct orientation.
- Close the cover securely.
3.3. Initial Power-On
- Connect the tracker to an external power supply (e.g., vehicle battery).
- Place the device outdoors for approximately 30 seconds to acquire a GPS signal. The LED lights will illuminate steadily once the device is working normally.
3.4. APN Configuration
The tracker requires APN (Access Point Name) settings for your SIM card's network provider to access the internet. If you are unsure of your APN, contact your SIM card provider.
- Basic APN Setting: Send SMS command:
8030000 APN(ReplaceAPNwith your actual APN, e.g.,8030000 internet). - APN with Username and Password: If your APN requires credentials, send SMS command:
8030000 APN APNuser APNpassword(ReplaceAPN,APNuser, andAPNpasswordwith your actual details).
3.5. Server IP/Port Configuration
To connect your tracker to the SinoTrack server, send the following SMS command:
- SMS command:
8040000 45.112.204.246 8090
3.6. Physical Installation
For optimal GPS signal reception, ensure the GPS antenna side of the device faces the clear sky. Avoid placing the device under metal objects. Glass and plastic covers are acceptable.
- Recommended Locations: Under the front windshield, under the rear windshield, or around the dashboard.

Figure 3: Example of tracker packaging.
3.7. Wiring Diagram
Connect the wires as shown in the diagram below. Ensure all connections are secure and correctly polarized to prevent damage to the device or vehicle.

Figure 4: Wiring Diagram. Red wire to positive battery terminal via 2A fuse. Black wire to negative battery terminal (ground). Orange wire to ACC (ignition switch). Yellow wire connects to the relay for remote control functions (e.g., fuel cut-off).
4. Operating Instructions
4.1. Quick Start Tracking
Once configured, you can track your device via a web platform or a mobile application.
- Website Tracking (PC Version):
Platform: Pro.SinoTrack.com
Username: Your tracker's ID number
Password:123456(default) - Mobile Application Tracking:
Search for