YUNBAO E-DV Controller

Contents

YUNBAO E-DV Controller User Manual

Camcorder Zoom Remote Control DV Controller with 2.5mm Spring Cable for Sony Canon Panasonic with LANC Interface

1. Product Introduction

This product supports LANC and P two modes, and is compatible with most DV camcorders from Panasonic, Sony, and Canon.

  • LANC Mode: For Sony and Canon camcorders with LANC interface.
  • P Mode: For Panasonic camcorders with CAM interface.

Main Functions:

  • Recording: Start / Stop recording
  • Zoom control: Control lens wide-angle (W) and telephoto (T) zoom
YUNBAO E-DV Controller mounted on a tripod handle
The YUNBAO E-DV Controller mounted on a tripod handle, showing its ergonomic design and control buttons.

2. Technical Specifications

Feature Specification
Compatible Brands Sony, Canon, Panasonic (with LANC or CAM interface)
Clamp Distance Ø10mm – Ø30mm
Control Cable Jack Ø2.5mm stereo jack
Control Cable Length 800mm (approx. 31.5 inches)
Package Weight 0.200kg (0.44lb)
Package Dimensions 20cm x 20cm x 10cm (7.87in x 7.87in x 3.94in)
Packaging of the YUNBAO E-DV Controller showing compatible models
Product packaging detailing compatible camcorder models for the E-DV Controller.

3. Setup

3.1 Handle Installation

  1. Loosen the knob until there is enough space in the clamp.
  2. Mount the controller onto the camcorder handle.
  3. Tighten the clamp to secure the controller.
  4. Warning: Do not over-tighten, as this may damage the device.

3.2 Connecting the Zoom Control Cable

  1. Ensure the camcorder is turned off before making connections.
  2. The control cable can be plugged into the 2.5mm remote control jack on the front or side of the controller.
  3. Select LANC or P mode according to the camcorder interface type using the switch on the controller.
  4. Insert the control cable into the designated position on your camcorder.
  5. Do not insert into the wrong position, as this may cause equipment damage.
Camcorder with YUNBAO E-DV Controller attached to tripod handle
The E-DV Controller connected to a camcorder and mounted on a tripod, ready for use.

4. Operation Instructions

  • REC Button (red button): Press to Start / Stop recording.
  • "W" Button: Switch to "W" to quickly move the lens to wide-angle mode.
  • "T" Button: Switch to "T" to quickly move the lens to telephoto mode.
  • Zoom Knob: Rotate the knob to control the zoom speed.
Video demonstrating the zoom control functionality of the E-DV Controller.

5. Maintenance

  • Do not use or store the device in dusty, humid, or high-temperature environments.
  • When using in a wet environment, avoid contact with water droplets to prevent malfunctions.
  • Do not use excessive force when plugging in cables to prevent damage.
  • Avoid subjecting the device to strong vibration or impact.
  • Do not use thinners, alcohol, or benzene-based cleaners. Use a slightly damp cloth for cleaning.
  • Do not place any objects on the controller.
  • Do not disassemble the controller by yourself.

6. Troubleshooting

If you encounter issues, please review the following common problems and solutions:

  • Controller not responding: Ensure the cable is securely connected to both the controller and the camcorder. Verify the camcorder is powered on and the correct mode (LANC/P) is selected on the controller.
  • Zoom not functioning: Check the mode switch (LANC/P) to ensure it matches your camcorder's interface. Confirm the camcorder's zoom function is enabled.
  • Recording not starting/stopping: Verify the camcorder is in recording standby mode and the cable connection is secure.

If problems persist, consult your camcorder's manual or contact customer support.

7. User Tips

  • Always check the compatibility list provided in the product description or on the packaging to ensure your camcorder model is supported.
  • Before any critical recording, perform a quick test of all functions (zoom, record start/stop) to ensure proper operation.
  • When attaching the controller, ensure it is firm but avoid excessive force to prevent damage to the clamp or your camcorder handle.

8. Frequently Asked Questions (FAQ)

Q: Does this controller work with the Canon XA60 camcorder?
A: The product is compatible with Canon camcorders that have a LANC interface. Specific models listed include XL1S, XL2, XM2, XHA1, XHG1. Please check your Canon XA60 camcorder's specifications to confirm if it features a LANC interface. If your model is not explicitly listed, compatibility cannot be guaranteed without further verification.

9. Warranty and Support

This product comes with a standard manufacturer's warranty. For detailed warranty information or technical support, please refer to the seller's contact information or the official product page.

A PDF user manual is available for download: View User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.