YUNBAO YunBao EG Controller

Contents

YunBao EG Controller User Manual

Model: YunBao EG Controller

Brand: YUNBAO

1. Product Introduction

The YunBao EG is a dedicated wired remote controller designed for Panasonic professional video cameras. It provides core control over aperture, focus, zoom, and recording functions. This controller is compatible with a wide range of Panasonic models, including but not limited to:

  • PX298MC, UX180, DVX200, AC130, PV100, FC100, UX90
  • AG-UX90, HC-PV100, AG-AC30, AG-UX180, HC-X1000, AG-AC90, AC90MC
  • DVC33, DVC63, DVC15, 180A, 180B, 130MC, 153MC, 160MC, 173MC
  • DVX200MC, 203MC, 260MC, 265MC, 285MC, 298MC
  • PX280, PX298, AG130, AG160, HVX200, HVX203
YunBao EG Controller with its packaging box

Figure 1: YunBao EG Controller and Packaging

2. Setup Instructions

2.1 Handle Installation

  1. Loosen the knob on the controller's clamp until there is sufficient space between the clamping jaws.
  2. Position the controller onto the desired camera handle or tripod arm.
  3. Tighten the knob firmly to secure the controller in place.

Warning: Do not over-tighten the clamp, as this may cause damage to the controller or the camera equipment.

YunBao EG Controller mounted on a handle

Figure 2: Controller Mounted on a Handle

2.2 Connecting the Control Cables

  1. Ensure both the camera and the YunBao EG controller are powered off before making any connections.
  2. Locate the 3.5mm jack on the controller and connect it to your camera's FOCUS/IRIS port.
  3. Locate the 2.5mm jack on the controller and connect it to your camera's ZOOM/S port.
  4. Once connected, power on your camera. Navigate to the camera's menu and set both IRIS and FOCUS to Manual (M) mode.
YunBao EG Controller showing 2.5mm and 3.5mm jack connections

Figure 3: Controller Cable Connections (2.5mm and 3.5mm jacks)

3. Operating Instructions

3.1 Mode Selection (A/M Switch)

Toggle the A/M switch on the controller to select between automatic and manual control modes for aperture/iris.

3.2 Control Functions

  • REC Button (Red): Press this button to start or stop video recording.
  • W Button: Press this button to quickly zoom the lens to its wide-angle position.
  • T Button: Press this button to quickly zoom the lens to its telephoto position.
  • Zoom Knob: Rotate this knob to precisely adjust the zoom speed.
  • Aperture Adjustment Knob: Rotate this knob to adjust the camera's aperture (iris).
  • Focus Adjustment Knob: Rotate this knob to adjust the camera's focus.
Front view of YunBao EG Controller showing REC, W/T buttons, and knobs

Figure 4: Controller Front View with Labeled Controls

3.3 Function Demonstration Video

Video 1: Demonstration of Zoom, Focus, and Aperture Control

4. Maintenance

  • To clean the controller, use only a slightly damp soft cloth.
  • Do not use thinners, alcohol, benzene-based cleaners, or any abrasive materials, as these can damage the device's finish and internal components.
  • Keep the controller dry and away from liquids.

5. Troubleshooting and Precautions

  • Environmental Conditions: Avoid using or storing the product in dusty, humid, or high-temperature environments. Do not expose the controller to water splashes or use it near water to prevent malfunctions.
  • Cable Handling: Do not apply excessive force when plugging in or unplugging the control cables. Improper handling can lead to damage to the cables or ports.
  • Physical Impact: Protect the device from strong vibrations or impacts, which can affect its functionality and durability.
  • Obstruction: Do not place any objects on top of the controller during use or storage.
  • Disassembly: Do not attempt to disassemble or repair the controller yourself. Unauthorized disassembly will void any potential warranty and may cause further damage.

6. Specifications

FeatureSpecification
Compatible CamerasPanasonic professional video cameras with FOCUS/IRIS and ZOOM/S ports (see Product Introduction for list)
Control FunctionsAperture, Focus, Zoom (speed control), Record Start/Stop
Clamp Mounting DiameterΦ10mm – Φ30mm
FOCUS/IRIS Port3.5mm jack
ZOOM/S Port2.5mm jack
Control Cable Length800mm
Product Dimensions (Approx.)14 cm (L) x 12 cm (W) x 10 cm (H)
Product Weight (Approx.)0.2 kg

7. User Tips

  • Always ensure cables are securely connected before powering on your camera and controller to prevent intermittent control issues.
  • Familiarize yourself with the zoom speed knob to achieve smooth and professional-looking zoom transitions.
  • When adjusting focus or aperture, make small, deliberate movements for precise control, especially in manual mode.

8. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your original point of purchase or the manufacturer directly. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.