Cherk Hyundai Elantra Avante 2016 2017

Contents

Interior Front Water Cup Holder Cover Trim User Manual

For Hyundai Elantra Avante 2016-2017

1. Product Overview

This product is a high-precision, high-gloss chrome trim piece, manufactured using premium ABS plastic base material combined with advanced vacuum chrome plating technology. It features a mirror-like finish, excellent corrosion resistance, and anti-aging properties. It is widely used for automotive interior and exterior modification, specifically designed for the front water cup holder area of the Hyundai Elantra Avante 2016-2017 models.

2. Key Features

  • Mirror High-Gloss Finish: Instantly upgrades the visual class and luxury feel of your vehicle's interior.
  • Superior Weather Resistance: Designed to withstand UV exposure, rain, and extreme temperatures without fading or oxidizing.
  • Custom Fit & Easy Install: Features precise 3M adhesive backing tailored for specific car models, ensuring a perfect fit without drilling.
  • Eco-Friendly Material: Made from non-toxic materials, fully compliant with EU RoHS and REACH standards.

3. Package Contents

  • High-Gloss Chrome Trim Piece(s) for the front water cup holder.
  • Pre-applied 3M Automotive Adhesive Tape.

4. Safety Information & Warnings

Warning: Please read the following safety warnings carefully before installation:

  • Driving Safety: NEVER attempt installation while the vehicle is in motion. Install only when the vehicle is stationary and parked in a safe area.
  • Visibility Obstruction: After installation, carefully check that the trim does not obstruct the mirror's field of view or interfere with the visibility of turn signals. If any obstruction occurs, discontinue use and remove the trim immediately.
  • Surface Preparation: The installation surface must be thoroughly cleaned and completely dry. Oil, dust, or moisture on the surface will prevent proper adhesion, causing the trim to detach while driving, which poses a safety hazard.
  • Temperature Limits: Installation is recommended at ambient temperatures above 15°C (59°F). Low temperatures reduce the adhesive strength of the 3M tape. Avoid washing the car or exposing it to rain for 24-48 hours after installation to allow the adhesive to fully cure.
  • Non-Structural Component: This product is for aesthetic decoration only. It provides no structural support or safety protection functions.
  • Suffocation Hazard: To avoid danger of suffocation, keep any plastic packaging away from babies and children. Do not use this bag in cribs, beds, carriages or playpens. This bag is not a toy.

5. Installation Steps

  1. Clean the Surface:

    Use an alcohol wipe or a dedicated cleaner to thoroughly wipe the area where the trim will be applied. Ensure the surface is free of oil, wax, dust, and moisture. Allow it to dry completely.

  2. Dry Fit (Test Positioning):

    Without peeling off the protective film from the adhesive, place the trim on the cup holder area to test the fit. Once the position is confirmed to be accurate and perfect, lightly mark the position with your finger for quick alignment during final installation.

    Dry fitting the cup holder trim in a Hyundai Elantra Avante interior

    Figure 1: Dry fitting the trim to ensure proper alignment before adhesion.

  3. Peel the Adhesive Backing:

    Carefully peel off the 3M adhesive protective film from the back of the trim. Caution: Once the film is removed, do not let the adhesive surface touch any object or your fingers, as this will reduce its stickiness.

    Back of the cup holder trim showing the adhesive tape

    Figure 2: The trim piece with pre-applied 3M automotive adhesive tape on the back.

  4. Apply and Secure:

    Align the trim precisely with the marked position. Press firmly from the center outwards for 30-60 seconds to ensure full contact between the adhesive and the surface, removing any air bubbles.

    Installed cup holder trim in a Hyundai Elantra Avante

    Figure 3: The cup holder trim fully installed in the vehicle's interior.

  5. Curing Time:

    After installation, avoid washing the car, exposure to rain, or high-pressure water jets on the area for 24 to 48 hours. This allows the 3M adhesive to reach maximum bonding strength.

6. Usage Limits & Maintenance

  • Automatic Car Washes: Although the bond is strong, avoid automatic brush car washes for the first week after installation to prevent bristles from lifting the edges.
  • Chemical Cleaners: When cleaning the vehicle, avoid using cleaners containing strong solvents, abrasives, or acids directly on the trim surface, as they may damage the chrome finish. Use a neutral pH car wash soap instead.
  • Damage Handling: If the trim becomes cracked, broken, or severely faded, replace it promptly to prevent debris from falling off and affecting driving safety.
  • Removal Instructions: If removal is necessary, use a hairdryer to heat the adhesive to soften it, then peel slowly. Any remaining adhesive residue can be cleaned with a dedicated adhesive remover.
  • Installation Risk: Improper installation (e.g., on a dirty surface) may cause the trim to fall off. We are not responsible for damages caused by incorrect installation.

7. Troubleshooting

This section addresses common issues you might encounter with your cup holder trim.

ProblemPossible CauseSolution
Trim does not stick properly or lifts at edges.
  • Surface not clean or dry.
  • Installation temperature too low.
  • Insufficient pressure applied during installation.
  • Adhesive contaminated before application.
  • Ensure surface is thoroughly cleaned with alcohol and completely dry before applying.
  • Install in ambient temperatures above 15°C (59°F).
  • Apply firm, even pressure for at least 30-60 seconds across the entire trim.
  • Avoid touching the adhesive surface after peeling the film.
Trim appears dull or scratched.
  • Use of abrasive cleaners.
  • Exposure to harsh chemicals.
  • Clean only with a soft cloth and neutral pH car wash soap.
  • Avoid contact with strong solvents, acids, or abrasive materials.

8. Specifications

Brand NameCherk
Model NameFor Hyundai Elantra Avante 2016 2017
Year Compatibility2016-2017
Item TypeInterior Mouldings
MaterialABS plastic
External Testing CertificationCCC
Item Weight0.3 kg
OriginMainland China
Package Length20 cm
Package Width20 cm
Package Height20 cm

9. User Tips

No specific user tips were available from customer reviews or Q&A for this product. However, to ensure the longevity and appearance of your trim, always follow the cleaning and maintenance guidelines provided in this manual. For best adhesion, ensure the installation surface is meticulously clean and dry, and apply firm, even pressure during installation.

10. Warranty & Support

For any questions regarding product defects, installation issues, or general inquiries, please contact the seller directly through your purchase platform. Please retain your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.