DRAGON gauge 2" 52mm 8-16V Blue Light Voltage Meter Gauge

Contents

2" 52mm 8-16V Blue Light Voltage Meter Gauge User Manual

Model: 2" 52mm 8-16V Blue Light Voltage Meter Gauge

Brand: DRAGON gauge

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your new 2" 52mm 8-16V Blue Light Voltage Meter Gauge. This device is designed to accurately measure and display the voltage of your automobile's power supply, offering reliable monitoring of your vehicle's electrical system. Its clear dial with blue backlighting ensures easy readability in various lighting conditions, making it convenient to obtain accurate voltage information without the need for additional lighting.

Overall view of the 2 inch 52mm 8-16V Blue Light Voltage Meter Gauge
Figure 1: Overall view of the Voltage Meter Gauge.

2. Safety Information

Please read and understand all safety instructions before installing or operating the device. Failure to do so may result in damage to the product, vehicle, or personal injury.

  • Always disconnect the vehicle's battery before performing any electrical work to prevent short circuits and electrical shock.
  • Ensure all wiring connections are secure and properly insulated to avoid electrical hazards.
  • Do not attempt to modify the gauge or its components. Unauthorized modifications can lead to malfunction and void the warranty.
  • Keep the device away from water and excessive moisture.
  • Professional installation is highly recommended for optimal performance and safety.

3. Package Contents

Verify that all items are present in the package:

  • 1 x Voltage Gauge
  • 1 x Bolt Pack (for mounting)

4. Specifications

Parameter Value
Measurement Range 8~16V
Operating Voltage 12V DC
Unit Volt
Diameter 52mm (2 inches)
Shell Color Sliver
Dial Color Silver
Backlight Color Blue
Material Type ABS + Metal
Placement on Vehicle Front
Max Current 0.3A
Item Weight 75g
Item Height 75mm
Item Width 123mm
Item Length 163mm
Origin Mainland China
Front view of the gauge with 56.6mm diameter measurement
Figure 2: Gauge dimensions, showing a diameter of 56.6mm (2.22in).

5. Installation

The installation process for this voltmeter gauge is generally straightforward, but due to the electrical nature of the product, professional installation is highly recommended to ensure correct wiring and optimal performance, as well as to protect your vehicle's electrical system.

5.1 Wiring Connections

The gauge requires connection to your vehicle's 12V DC power supply. Typically, this involves connecting to a switched 12V source (ignition), ground, and a lighting circuit for the backlight. Refer to the back of the gauge for terminal identification.

Rear view of the gauge showing wiring terminals for power and ground
Figure 3: Rear view of the gauge, illustrating the terminals for electrical connections.

5.2 Mounting

The gauge is designed for front placement in a 52mm (2 inch) diameter opening. Use the provided bolt pack to secure the gauge firmly in place within your dashboard or a suitable mounting pod.

6. Operation

Once properly installed and wired, the voltmeter gauge will automatically display the current voltage of your automobile's power supply when the vehicle's ignition is on. The blue backlight illuminates the dial, making it easy to read the voltage values (8-16V) even in dark environments.

Close-up of the gauge face with blue backlight illuminated, showing voltage reading
Figure 4: The gauge dial illuminated with blue light for clear reading.

7. Maintenance

The voltmeter gauge requires minimal maintenance. Keep the dial and casing clean by wiping with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that could damage the surface or display. Ensure all electrical connections remain secure over time.

8. Troubleshooting

  • Gauge needle not moving or stuck: If the red needle stops running, carefully remove the LED bulb from the rear of the gauge. Gently turn the red needle around several times using a thin iron wire, then re-check its operation.
  • Pointer shift issue: If the product pointer appears shifted, remove the LED bulb from the back and gently press down on the spring mechanism to see if it recovers its correct position.
  • No backlight: Check the wiring connection to the lighting circuit. Ensure the LED bulb is properly seated.
  • Inaccurate readings: Verify all wiring connections are tight and free from corrosion. Ensure the vehicle's battery and charging system are functioning correctly.

9. User Tips

No specific user tips were available from product reviews or Q&A for this product.

10. Warranty and Support

For warranty information or technical support, please refer to the seller's policies or contact the point of purchase. Keep your proof of purchase for any warranty claims.

A digital version of this user manual is available for download: User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.