1. Safety Warnings
Please read all safety warnings and instructions carefully before installation and use. Failure to follow these instructions may result in injury or damage.
- Vehicle Stability: Before installation, park the motorcycle on a flat, stable surface. Support it with the main stand and turn off the power to prevent tipping over and causing injury.
- Auxiliary Tool: This rearview mirror is an auxiliary tool for observing road conditions behind you. Always turn your head to look directly before turning or changing lanes; do not rely entirely on the mirror.
- Mirror Surface: The mirror surface is made of glass. If cracks or damage appear, stop using the mirror immediately to avoid injury from flying fragments.
- Secure Fastening: After installation, ensure the bracket is securely fastened. No looseness or shaking should occur during riding, as this will impair visibility and cause danger.
- Convex Mirrors: If applicable, convex mirrors make objects appear farther away than they actually are. Use extra caution when judging distances for lane changes.
2. Product Overview
The LMoDri F142 Motorcycle Rear View Mirrors are designed for sport motorcycles, offering a clear view and durable construction.
Product Features:
- Product Name: Motorcycle Rearview Mirror (Diamond-shaped Mirror)
- Material: ABS plastic mirror housing, glass mirror, and aluminum alloy rod.
- Color: Black
- Dimensions: Length: 32cm, Width: 8.8cm
- Weight: Approximately 580g per pair
- Installment Screw Compatibility: 8mm & 10mm
- Fitment: Suitable for most sport motorcycles. Please confirm your motorcycle's mounting hole positions and bracket specifications before purchase.

Figure 2.1: LMoDri Motorcycle Rear View Mirrors (Pair)

Figure 2.2: Dimensions of the LMoDri Rear View Mirror (Length 32cm, Mirror Width 8.8cm, Mirror Length 16.5cm)
3. Package Contents
Your package should contain the following items:
- 1 x Pair of Motorcycle Rear View Mirrors (1 Left + 1 Right)
- 1 x Screw Kit, including:
- 2 x 10mm Clockwise Thread Screws
- 2 x 8mm Clockwise Thread Screws
- 1 x 10mm Counter-clockwise Thread Screw
- 1 x 8mm Counter-clockwise Thread Screw

Figure 3.1: Included mirrors and screw kit
4. Installation (Setup)
Tools Required:
- Phillips screwdriver
- Wrench (select according to screw specifications)
Installation Process:
- Remove the Original Mirror: Use a wrench to unscrew the original mirror from the motorcycle handlebar. Clean any dust and oil from the mounting holes.
- Check Accessories: Verify that the gaskets, screws, and bracket base in the accessory package match those shown in the product images. Ensure nothing is missing.
- Secure the Base: Align the new mirror base with the mounting holes on the motorcycle handlebar. Place a rubber gasket underneath the base. Hand-tighten the screws initially to avoid thread stripping.
- Install the Mirror: Align the mirror bracket with the base interface. Rotate and tighten it to ensure a tight connection.
- Preliminary Angle Adjustment: Sit in your standard riding position. Rotate the mirror and bracket to adjust the angle so that the rear road surface is clearly visible.
- Final Tightening: Use a wrench to fully tighten all screws. Ensure there is no looseness or shaking during riding.
- Installation Check: Gently shake the mirror by hand to confirm it is securely fastened and the angle is stable. Installation is complete.

Figure 4.1: Example of LMoDri mirrors installed on a motorcycle
5. Mirror Adjustment (Operating)
Proper mirror adjustment is crucial for safe riding.
- Riding Posture: Maintain a normal riding posture, hold the handlebars with both hands, and look straight ahead at the road.
- Left Mirror Adjustment: Rotate the left mirror so that the horizon is in the top 1/3 of the mirror. This should clearly cover the left rear lane and roadside conditions.
- Right Mirror Adjustment: Rotate the right mirror so that the horizon is in the center of the mirror. This should clearly cover the right rear and adjacent lane conditions.
- Final Check: After adjustment, double-check that the bracket is secure to ensure the angle does not shift due to vibration during riding.
6. Maintenance & Care
Regular maintenance will prolong the life and performance of your mirrors.
- Daily Cleaning: Wipe the mirror surface with a soft cloth (e.g., eyeglass cloth) dampened with clean water or a neutral detergent. Do not use rough cloths, steel wool, or alcohol, as these may scratch the coating.
- Regular Inspection: Every 500 km or monthly, check if the bracket screws are loose and if the mirror has cracks or scratches. Tighten or replace as needed.
- Storage Protection: When the motorcycle is not in use for an extended period, cover the mirror with a dust cloth to prevent aging of the mirror housing and fading of the mirror surface due to sun exposure.
7. Troubleshooting
Refer to the table below for common issues and their solutions.
| Fault Phenomenon | Possible Cause | Solution |
|---|---|---|
| Mirror shaking or loose | Bracket screws not tightened / Thread stripping at interface | Retighten screws; replace bracket or interface nut if threads are stripped. |
| Blurred vision or double images | Mirror surface soiled / Coating damaged | Wipe with neutral detergent; replace mirror if coating is damaged. |
| Mirror cracked or chipped | External impact / Material aging | Replace the entire mirror immediately; do not replace only the mirror surface. |
| Unable to install / Interface mismatch | Incorrect thread specification / Foreign objects in interface | Confirm vehicle mounting hole positions and replace with appropriate accessories; clear foreign objects from interface. |
8. Specifications
| Attribute | Detail |
|---|---|
| Model Name | F142 |
| Brand Name | LMoDri |
| Item Type | Side Mirrors & Accessories |
| Material | ABS plastic (mirror head cover) & Aluminium Rod (mirror rod) |
| Item Length | 32 cm |
| Item Width | 8.8 cm |
| Item Weight | 580g (per pair) |
| Color | Black |
| Installment Screw Sizes | 8mm & 10mm |
| Origin | Mainland China |
| High-concerned chemical | None |
9. User Tips
Based on feedback from other users, here are some helpful tips:
- These mirrors offer a wider angle of view compared to traditional mirrors, making it easier to see clearly.
- Users report that these mirrors generally do not vibrate excessively, providing a clear reflection.
- While the mirrors are adjustable, some users note that the range of movement might be limited.
- Pay close attention to the screw threads required for your specific motorcycle model. Some bikes (e.g., Kawasaki Z1000) may require reverse threads, so ensure you have the correct screws from the kit.
10. Frequently Asked Questions (FAQ)
- Q: What material is the mirror arm made of?
A: The mirror rod (arm) is made of aluminum. - Q: Is the reflection clear, or does it transmit a lot of vibration?
A: The reflection is generally clear, and users report that it does not transmit much vibration (e.g., on Suzuki Skywave). - Q: Are these mirrors adjustable?
A: Yes, the mirrors are adjustable. - Q: What screw sizes are included for mounting?
A: The kit includes 8mm and 10mm screws, with both clockwise and counter-clockwise (left-hand) threads to accommodate various motorcycles. - Q: Does the package include a pair of mirrors (left and right)?
A: Yes, the product is sold as a pair, including one left and one right mirror.
11. Warranty and Support
Specific warranty information for this product is not provided in the available documentation. For support or warranty inquiries, please contact your retailer or the manufacturer directly.
A detailed user manual in PDF format is available for download from the seller's product page if you require further information.