1. Introduction
This manual provides comprehensive instructions for the DC 5V IR Infrared Remote Decoder Encoding Transmitter Receiver Wireless Module. This versatile module is designed for various DIY electronic projects, enabling both infrared signal transmission and reception. It is ideal for applications such as smart home control, educational projects, and intelligent industrial equipment.
2. Safety Information
- Ensure the power supply voltage is exactly 5V DC. Incorrect voltage can damage the module.
- Avoid short-circuiting the pins.
- Handle the module with care to prevent physical damage to components.
- Do not expose the module to moisture, extreme temperatures, or static electricity.
- Always disconnect power before making or changing connections.
3. Product Overview
3.1. What's in the Box
The package typically includes:
- 1 x DC 5V IR Infrared Remote Decoder Encoding Transmitter Receiver Wireless Module
3.2. Key Features
- Integrated infrared emission and reception capabilities.
- Supports infrared encoding and decoding functions.
- Features an infrared emission head expansion interface.
- Utilizes serial communication (TTL level) for easy integration with microcontrollers.
- Capable of controlling a wide range of infrared format devices (approximately 99%), including televisions, fans, and other electronic equipment.
- Supports various common encoding chips such as uPD6121, uPD6122, TC9012, PT2221, PT2222, SC6121, SC6122, and SC9012.
- Suitable for infrared wireless data communication, data transmission, and control applications.
3.3. Component Identification


The module features the following pins for connection:
- 5V: Power supply input (positive).
- GND: Ground connection.
- TXD: Transmit Data pin (for sending IR signals via serial communication).
- RXD: Receive Data pin (for receiving IR signals via serial communication).
Other key components include the IR LED (for transmitting) and the IR Receiver (for receiving).
4. Specifications
| Parameter | Value |
|---|---|
| Dimensions | 27mm x 17mm |
| Supply Voltage | 5V DC |
| Communication | Serial (TTL Level) |
| IR Firing Distance | 6-10 meters (actual range may vary with environmental conditions) |
| Package Type | SMD |
| Application | Computer, Module |
| Condition | New |
| Connectivity | Wireless |
5. Setup Instructions
5.1. Wiring Diagram
Connect the module to your microcontroller or development board as follows:
- Module 5V → Microcontroller 5V (or appropriate VCC)
- Module GND → Microcontroller GND
- Module TXD → Microcontroller RX (Receive pin)
- Module RXD → Microcontroller TX (Transmit pin)

5.2. Initial Connection
After wiring, ensure your microcontroller's serial port is configured to communicate with the module at the correct baud rate (typically 9600 or 115200, refer to your specific library or module documentation for exact values). The communication level is TTL, so direct connection to most microcontrollers is possible.
6. Operating Instructions
6.1. Infrared Transmission (Encoding)
To transmit an infrared signal, you will send the encoded data via the module's TXD pin using serial communication. Your microcontroller code will need to:
- Encode the desired IR command (e.g., a TV remote button press) into a format compatible with one of the supported chips (uPD6121, PT2221, etc.).
- Send this encoded data as a serial byte stream to the module's TXD pin.
- The module will then convert this data into infrared pulses and emit them via the IR LED.
Ensure a clear line of sight between the module's IR LED and the receiving device.
6.2. Infrared Reception (Decoding)
To receive and decode an infrared signal, the module's IR receiver will detect incoming IR pulses, convert them into a serial data stream, and send them out via the RXD pin to your microcontroller. Your microcontroller code will need to:
- Read the incoming serial data from the module's RXD pin.
- Decode this data to identify the original IR command.
The module is designed to decode signals from a wide range of IR remote controls that use the supported encoding chips.
7. Maintenance
- Keep the module clean and free from dust. Use a soft, dry cloth for cleaning.
- Store the module in a dry environment, away from direct sunlight and extreme temperatures.
- Avoid applying excessive force to the components or pins.
- Regularly inspect connections for any signs of corrosion or damage.
8. Troubleshooting
- Module Not Powering On: Double-check your 5V and GND connections. Ensure the power supply is providing the correct voltage and current.
- No IR Signal Transmission/Reception:
- Verify that the TXD and RXD pins are correctly connected to your microcontroller's serial pins (TX to RX, RX to TX).
- Ensure your microcontroller code is correctly encoding/decoding IR signals and that the serial communication parameters (e.g., baud rate) match.
- Confirm there is a clear line of sight between the module and the target IR device. Obstructions can block IR signals.
- Check the effective firing distance (6-10 meters) and ensure the module is within range.
- Incorrect Module Received: If the module you received does not match the product description or images (e.g., missing components like a quartz resonator), contact the seller immediately for assistance.
- Physical Damage Upon Arrival: Inspect the module carefully upon receipt. If it appears damaged, document the damage with photos and contact the seller.
9. User Tips
- Initial Testing: Always perform a basic functional test of the module (e.g., power-on, simple transmit/receive test) immediately after receiving it and before integrating it into a larger project. This helps confirm the module is in working order.
- IR Communication Basics: Infrared communication relies on pulses of invisible light. Different remote controls use various protocols (like NEC, RC5, etc.) to structure these pulses. For successful decoding and encoding, it's helpful to understand the specific protocol used by the remote control you intend to emulate or receive signals from. Libraries for popular microcontrollers often handle these protocols.
10. Frequently Asked Questions (FAQ)
- Q: Is there a datasheet for this device?
- A: Yes, a user manual in PDF format is available for this module. You can access it at: User Manual (PDF). This document provides detailed technical information and usage guidelines.
- Q: What is the basic concept of IR communication? Is there any special protocol?
- A: Infrared (IR) communication transmits data wirelessly using pulses of invisible infrared light. It's widely used in remote controls for consumer electronics. Yes, there are indeed special protocols (e.g., NEC, RC5, Sony, etc.) that define the specific timing, pulse width, and structure of these IR light bursts to represent data. This module is designed to support many common IR protocols, allowing it to decode signals from various remote controls and encode signals for transmission.
11. Warranty and Support
For specific warranty information, technical support, or any issues not covered in this manual, please contact the seller or manufacturer directly. Always refer to the official product documentation, including the provided PDF manual, for the most up-to-date and detailed information.