YAXUN YX702

Contents

Yaxun 702 Hot Air Gun and Soldering 2-in-1 SMD Rework Station User Manual

Model: YX702

Introduction

Thank you for choosing the Yaxun 702 Hot Air Gun and Soldering 2-in-1 SMD Rework Station. This high-quality welding station is designed for precision work on BGA and SMD components, offering stable performance and intuitive operation. This manual provides essential information for the safe and effective use of your new equipment.

Yaxun 702 Hot Air Gun and Soldering 2-in-1 SMD Rework Station with accessories
Figure 1: Yaxun 702 Hot Air Gun and Soldering 2-in-1 SMD Rework Station with included accessories.

Safety Information

Please read and understand all safety instructions before operating the Yaxun 702 Rework Station. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Always operate the unit in a well-ventilated area to avoid inhaling fumes from soldering and flux.
  • Wear appropriate personal protective equipment (PPE), including safety glasses and heat-resistant gloves.
  • Do not touch the hot air gun nozzle or soldering iron tip when the unit is powered on or cooling down. They reach very high temperatures.
  • Ensure the unit is properly grounded.
  • Keep flammable materials away from the work area.
  • Never leave the unit unattended while it is powered on.
  • Disconnect the power cord from the outlet before performing any maintenance or when the unit is not in use.
  • Do not use the unit in wet or damp conditions.
  • Keep children and pets away from the work area.
  • The output voltage of 24V for the soldering iron ensures safety for electronic components and the user.

Package Contents

Upon unpacking, please verify that all items listed below are present and undamaged:

  • Yaxun 702 Main Unit (Hot Air Station and Soldering Station)
  • Hot Air Gun Handle
  • Soldering Iron Handle
  • Soldering Iron Stand
  • Hot Air Nozzles (various sizes, typically 3-4 pieces)
  • Power Cord
  • User Manual (this document)

Product Overview

The Yaxun 702 is a versatile 2-in-1 rework station featuring a hot air gun and a soldering iron. It boasts a double circuit board design for enhanced stability and high quality. Key features include:

  • Dual LCD Temperature Displays: Separate digital displays for both the hot air gun and soldering iron, allowing precise temperature monitoring and preventing damage to sensitive components.
  • Electronic Constant-Temperature PID Control: Advanced PID hardware ensures accurate temperature control for both tools, unaffected by changes in air flow.
  • Diaphragm-Type Air Pump: Provides a long service lifetime, strong wind pressure, and consistent air flow for the hot air gun.
  • Ceramic Heating Core: The soldering iron utilizes a China-made ceramic heating core and thermocouple loop transducer for rapid heating and stable temperature.
  • Safety Features: 24V output voltage for the soldering iron ensures safety for both electronic elements and the user.
Yaxun 702 control panel with LCD displays and knobs
Figure 2: Front panel of the Yaxun 702, showing dual LCD displays and control knobs for temperature and air flow.

Setup

  1. Unpacking: Carefully remove all components from the packaging.
  2. Remove Shipping Screw: Before initial use, it is CRITICAL to remove the red shipping screw located on the bottom of the main unit. This screw secures the air pump during transit. Failure to remove it will damage the air pump.
    Video 1: Demonstration of removing the shipping screw from the bottom of the Yaxun 702 unit before first use.
  3. Connect Hot Air Gun: Plug the hot air gun cable into the designated port on the front panel.
  4. Connect Soldering Iron: Plug the soldering iron cable into its designated port on the front panel.
  5. Place Soldering Iron Stand: Position the soldering iron stand in a convenient and safe location on your workbench.
  6. Attach Nozzles: Select the appropriate hot air nozzle for your task and securely attach it to the hot air gun.
  7. Power Connection: Connect the power cord to the main unit and then to a suitable power outlet (110V or 220V, depending on your model).

Operating Instructions

  1. Power On: Flip the main power switch (usually located on the front or side) to the 'ON' position. The LCD displays will illuminate.
  2. Hot Air Gun Operation:
    • Turn on the hot air gun switch.
    • Adjust the "TEMP" knob for the hot air gun to set the desired temperature (range: 100°C - 480°C). The LCD will show the set temperature and then the actual temperature as it heats up.
    • Adjust the "AIR" knob to control the airflow. Start with a lower setting and increase as needed.
    • Place the hot air gun in its holder when not in active use; it will automatically cool down and enter standby mode.
  3. Soldering Iron Operation:
    • Turn on the soldering iron switch.
    • Adjust the "TEMP" knob for the soldering iron to set the desired temperature (range: 200°C - 480°C). The LCD will show the set temperature and then the actual temperature as it heats up.
    • Allow a few moments for the soldering iron to reach the set temperature.
    • Always return the soldering iron to its stand when not in use.
  4. Power Off: When finished, turn off both the hot air gun and soldering iron switches. Allow the hot air gun to cool down completely (it will continue to blow cool air until safe) before turning off the main power switch.

Maintenance

  • Soldering Iron Tip Care:
    • Always keep the soldering iron tip tinned with solder to prevent oxidation.
    • Clean the tip regularly using a damp sponge or brass wool.
    • Replace worn or oxidized tips to ensure efficient heat transfer.
  • Hot Air Gun Nozzles: Clean nozzles periodically to remove flux residue. Ensure they are securely attached.
  • General Cleaning: Keep the main unit and tools clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
  • Air Filter (if applicable): Check and clean any air filters if your model includes them, to maintain optimal airflow.

Troubleshooting

ProblemPossible CauseSolution
Unit does not power onNo power supply; power cord loose; main switch offCheck power outlet; ensure power cord is securely connected; turn on main power switch.
Hot air gun has no airflow or weak airflowShipping screw not removed; air pump malfunction; air hose kinkedEnsure shipping screw is removed (refer to Setup section); check air hose for kinks; contact support if air pump is faulty.
Hot air gun or soldering iron not heatingTool switch off; heating element failure; temperature set too lowTurn on the respective tool switch; increase temperature setting; contact support if heating element is faulty.
Inaccurate temperature displaySensor malfunction; environmental factorsEnsure proper ventilation; contact support for sensor issues.

Specifications

FeatureSpecification
Model NumberYX702
OriginMainland China
CertificationCE
Hot Air Temperature Range100°C - 480°C
Soldering Iron Temperature Range200°C - 480°C
Air Pump TypeDiaphragm
Input Voltage Options110V or 220V (model dependent)
Package Dimensions (L x W x H)23 cm x 38 cm x 31 cm
Package Weight5.8 kg

User Tips

Based on common user inquiries and product characteristics:

  • Crucial First Step: Always remember to remove the red shipping screw from the bottom of the unit before plugging it in and turning it on. This prevents damage to the internal air pump.
  • Temperature Control: Utilize the separate temperature controls and LCD displays to precisely match the heat requirements of your specific components and solder type.
  • Airflow Adjustment: Experiment with the airflow knob to find the optimal setting for different tasks, ensuring components are not blown away while still providing effective heat.
  • Soldering Tip Maintenance: Regular tinning and cleaning of your soldering iron tip will significantly extend its lifespan and improve soldering quality.

Warranty and Support

For any warranty claims, technical support, or inquiries regarding your Yaxun 702 Rework Station, please contact the seller or the official YAXUN service center. Retain your proof of purchase for warranty purposes.

Seller: YAXUN Official Store

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.