Dahao E831, E832, E833, E851, E852, E853

Contents

Dahao LCD Signal Board and Cable Instruction Manual

Models: E831, E832, E833, E851, E852, E853

1. Product Overview

This manual provides instructions for the Dahao LCD Signal Boards and Signal Cables, which are electronic spare parts designed for use in Chinese Dahao embroidery machines. These components are crucial for the proper functioning of the machine's display and control systems.

Available models include:

  • LCD Signal Boards: E831, E832, E833, E851, E852, E853
  • Signal Cables compatible with E851 and other models.

2. Specifications

AttributeDetail
Part NameLCD Signal Board / Signal Cable
TypeElectronic Parts
MaterialPlastic and Metal
UseEmbroidery Machines
Compatible Machine BrandChinese Dahao Embroidery Machines
OriginMainland China

Package Dimensions:

  • Length: 5 cm
  • Width: 10 cm
  • Height: 15 cm
  • Weight: 0.2 kg

3. Setup and Installation

These components are designed for integration into Dahao embroidery machines. Installation should be performed by qualified personnel or individuals with experience in embroidery machine maintenance.

  1. Compatibility Check: Before installation, carefully verify that the specific LCD signal board (E831, E832, E833, E851, E852, E853) or signal cable model is compatible with your embroidery machine's existing components. Manufacturers may use similar parts across different machine series, so a visual and part number comparison is essential.
  2. Power Disconnection: Ensure the embroidery machine is completely powered off and unplugged from the main power supply before attempting any installation or replacement.
  3. Accessing Components: Carefully open the machine's casing to access the existing LCD signal board or cable. Refer to your machine's specific service manual for guidance on accessing internal components.
  4. Removal of Old Component: Disconnect all cables and fasteners securing the old signal board or cable. Note the orientation and connection points for proper reinstallation.
  5. Installation of New Component:
    • Position the new Dahao LCD signal board or cable in the correct orientation.
    • Secure it with the appropriate fasteners.
    • Reconnect all associated cables, ensuring a firm and correct connection.
  6. Reassembly: Carefully reassemble the machine's casing.
  7. Initial Power-Up: Plug the machine back into the power supply and power it on. Observe the LCD display and machine behavior for any error messages or unusual operation.

Important: If you are unsure about the installation process or compatibility, it is recommended to consult with a professional technician or the supplier before proceeding.

Dahao E851E-0605 LCD Signal Board

Figure 1: Dahao E851E-0605 LCD Signal Board. This image shows the green circuit board with various electronic components, connectors, and the part number E851E-0605 clearly visible.

Dahao P/N-E833D-0705 LCD Signal Board

Figure 2: Dahao P/N-E833D-0705 LCD Signal Board. This image displays another variant of the green circuit board, featuring different component layouts and the part number P/N-E833D-0705.

Signal Cable for Dahao Embroidery Machines

Figure 3: Signal Cable for Dahao Embroidery Machines. This image shows a flat ribbon cable with multiple individual wires, terminated with two multi-pin connectors, used for transmitting signals within the machine.

4. Operating Instructions

The Dahao LCD Signal Board and Signal Cable are internal electronic components that facilitate communication between the embroidery machine's main control unit and its LCD display. They do not have direct user-operable controls.

Once correctly installed, the components operate automatically as part of the embroidery machine's system. Ensure that the machine's power supply is stable and within specified voltage ranges to prevent damage to electronic components.

For specific operating instructions related to your embroidery machine's functions, please refer to the machine's primary user manual.

5. Maintenance

These electronic components generally require minimal maintenance. However, adhering to the following guidelines can help prolong their lifespan and ensure reliable operation:

  • Keep Clean: Ensure the environment around the embroidery machine is clean and free from dust, lint, and debris, which can accumulate on circuit boards and cause overheating or short circuits.
  • Avoid Moisture: Protect the machine and its internal components from moisture and humidity. Water damage can severely impact electronic parts.
  • Stable Power Supply: Use a stable power source and consider surge protectors to prevent voltage fluctuations that could damage sensitive electronics.
  • Handle with Care: When handling the boards or cables, avoid touching the electronic contacts directly. Use anti-static precautions if possible.
  • Regular Inspection: Periodically inspect visible cables for signs of wear, fraying, or damage. Replace any damaged cables promptly.

6. Troubleshooting

If you experience issues after installing a new LCD signal board or cable, consider the following troubleshooting steps:

  • No Display/Incorrect Display:
    • Check all cable connections to ensure they are secure and correctly seated.
    • Verify that the new board/cable is the correct model for your machine.
    • Inspect the board for any visible damage or burnt components.
  • Machine Errors:
    • If the machine displays error codes, consult your embroidery machine's user manual for their meaning and recommended solutions.
    • Ensure all other machine components are functioning correctly.
  • Intermittent Issues:
    • Intermittent problems can sometimes be caused by loose connections or environmental factors like temperature or humidity. Re-seat connections and check the operating environment.

Warning: Do not attempt to repair damaged electronic components unless you are a qualified technician. Incorrect repairs can lead to further damage or safety hazards.

7. User Tips

  • Always double-check the specific model number (e.g., E831, E851) of your existing board or cable before purchasing a replacement to ensure perfect compatibility.
  • When replacing parts, take photos of the original connections before disconnecting them. This can serve as a helpful reference during reassembly.
  • If you are unable to find the exact part you need, or have questions about compatibility, it is advisable to contact the supplier for assistance.

8. Frequently Asked Questions (FAQ)

Q: How do I know which board model I need?
A: The model number (e.g., E831, E851) is typically printed directly on the circuit board or on a label attached to it. Carefully inspect your existing component for this information.
Q: Can I install these parts myself?
A: Installation requires familiarity with electronic components and embroidery machine internals. If you are not experienced, it is recommended to seek professional assistance to avoid damage to the part or the machine.

9. Warranty and Support

For any questions regarding product functionality, compatibility, or technical support, please contact the supplier:

Supplier: Richard's store - Yiwu Prague Embroidery Machine Parts Co., Ltd

Please retain your purchase records for any warranty claims or support inquiries.

© 2023 Dahao. All rights reserved. This manual is for informational purposes only.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.