1. Introduction
This manual provides essential information for the installation, operation, maintenance, and troubleshooting of Dahao Thread Break Detecting Boards. These electronic components are designed for use in various Chinese embroidery machines equipped with the Dahao system. Please read this manual thoroughly before attempting any installation or maintenance.
2. Product Overview
The Dahao Thread Break Detecting Board is a crucial electronic part for embroidery machines, responsible for detecting thread breaks during the embroidery process, thereby ensuring smooth operation and preventing defects. These boards are compatible with a range of Chinese embroidery machines, including Feiya, Prodigi, ZGM, AEMCO, and other Dahao system machines.
Available Board Models:
- P/N EF176 / EF176B
- P/N PD001
- P/N PD002
- P/N PD003A
- P/N PD014A
Product Images:






3. Specifications
| Attribute | Value |
|---|---|
| Material | Plastic and Metal |
| Use | Embroidery |
| Type | Electronic Parts |
| Origin | Mainland China |
| Compatible Machines | Feiya, Prodigi, ZGM, AEMCO, Dahao embroidery machines |
| Board Number 1 | EF176 = EF176B |
| Board Number 2 | PD001 |
| Board Number 3 | PD002 |
| Board Number 4 | PD003A |
| Board Number 5 | PD014A |
Package Dimensions:
- Length: 12 cm
- Width: 15 cm
- Height: 7 cm
- Weight: 0.2 kg
4. Installation and Setup
Installing a thread break detecting board requires careful handling of electronic components and familiarity with embroidery machine systems. It is highly recommended that installation be performed by a qualified technician or an experienced individual.
Compatibility Check:
Before installation, it is crucial to verify the compatibility of the new board with your specific embroidery machine model. Manufacturers sometimes use similar components across different machine series. Always compare the part number (P/N) and visual appearance of the new board with the original part to ensure a correct match.
Warning: Incorrect installation or incompatible parts can lead to damage to the embroidery machine or the board itself.
5. Operation
The thread break detecting board operates automatically as an integral part of your embroidery machine's control system. Once correctly installed, it continuously monitors the thread tension and movement. Upon detecting a thread break, the board signals the machine to pause operation, allowing the operator to re-thread and resume the embroidery process without significant loss of work or quality.
No direct user interaction is typically required with the board itself during normal operation, as its function is automated within the machine's software and hardware.
6. Maintenance
As an electronic component, the thread break detecting board generally requires minimal maintenance. However, adhering to general electronic component care practices can prolong its lifespan and ensure reliable performance:
- Keep Clean: Ensure the area around the board within the machine is free from dust, lint, and debris, which can accumulate and potentially interfere with electronic circuits. Use compressed air or a soft brush for cleaning.
- Avoid Moisture: Protect the board from moisture and excessive humidity, which can cause corrosion and short circuits.
- Handle with Care: When handling the board, always use anti-static precautions (e.g., anti-static wrist strap) to prevent damage from electrostatic discharge (ESD).
- Regular Inspection: Periodically inspect the board for any visible signs of damage, such as burnt components, loose connections, or corrosion.
7. Troubleshooting
If you experience issues with thread break detection or general machine operation after installing or while using the board, consider the following:
- No Thread Break Detection:
- Verify all connections to the board are secure and correctly seated.
- Check the machine's settings related to thread break sensors.
- Ensure the thread path is clear and the thread sensor itself is clean and unobstructed.
- Machine Malfunction After Installation:
- Re-check compatibility (P/N and visual match) with your machine.
- Ensure the board is installed correctly and all cables are connected to their designated ports.
- If possible, test with the original board (if functional) to isolate the issue.
- General Electronic Issues:
- Power cycle the machine.
- Consult your embroidery machine's main user manual for specific diagnostic steps related to electronic components.
If problems persist, it is advisable to contact a professional embroidery machine technician or the supplier for further assistance.
8. User Tips
- Verify Board Version: When replacing a board, always confirm not only the P/N but also any version numbers (e.g., PD014A version 1.0) to ensure full compatibility and optimal performance.
- Consult Machine Manual: For specific wiring diagrams or component locations, always refer to your embroidery machine's official service manual.
9. Warranty and Support
This product is supplied by Yiwu Prague Embroidery Machine Parts Co., Ltd. They are a professional supplier of spare parts for various embroidery machines, including Barudan, Tajima, SWF, ZSK, Happy, and Chinese embroidery machines.
For technical support, warranty inquiries, or if you have any questions regarding the product's compatibility or functionality, please contact the seller directly. They offer technical support and aim to provide excellent after-sales service.
You can find their store and contact information via their official store page: https://www.aliexpress.com/store/736750
Please note that specific warranty terms and conditions should be confirmed with the seller at the time of purchase.