Introduction
The BEAR FORCE Premium Foam Cannon is designed to provide a superior car washing experience by generating thick, clinging snow foam. Its heavy-duty nickel-plated brass construction ensures durability and corrosion resistance, while the adjustable features allow for customized foam density and spray patterns. This manual will guide you through the setup, operation, and maintenance of your new foam cannon.

Image: BEAR FORCE Foam Cannon with various pressure washer adapters.
Key Features
- Rich Snow Foam with Adjustable Control: Easily create thick or light foam by adjusting the soap ratio dial. The front nozzle rotates to switch between a concentrated jet and a wide fan spray, making it versatile for various cleaning tasks.
- Heavy-Duty Brass Construction: Built with a nickel-plated brass body, rated for pressures up to 4000 PSI (280 Bar). This design ensures durability, corrosion resistance, and consistent performance.
- Easy to Clean and Maintain: The unique threaded twist-off nozzle provides tool-free access to the stainless steel mesh filter for quick cleaning or replacement, ensuring smooth foam output over time.
- Wide Applications: Designed for compatibility with a wide range of pressure washers, offering 8 interchangeable adapter options for popular brands.
- One-Way Breathable Valve: Ensures stable air pressure and prevents leakage during use.

Image: Close-up of the Nickel-Plated Brass Chamber, highlighting anti-corrosion, steady pressure, and thick foam capabilities.

Image: Diagram showing the one-way breathable valve for stable air pressure and no leakage.
Setup Instructions
- Prepare the Solution: Fill the 1L transparent reservoir with water and your preferred car wash soap. The bottle has markings for easy viewing of liquid levels.
- Attach the Foam Cannon Head: Securely screw the foam cannon head onto the filled reservoir. The snap-on design ensures easy installation.
- Select and Install Adapter: Choose the appropriate adapter for your pressure washer model from the 8 available options. Attach the selected adapter to the foam cannon's 1/4" Quick Plug. Ensure a secure connection.
- Connect to Pressure Washer: Connect the foam cannon assembly to your pressure washer gun. The 1/4" Quick Connection allows for fast and easy attachment.

Image: Dual-Thread Cap for direct connection to standard 500ml/16oz car detergent bottles and Coca-Cola bottles, offering tool-free installation.
Video: Product demonstration showing filling, assembly, and application of foam.
Operating Instructions
- Adjust Foam Thickness: Use the water/soap ratio dial on top of the foam cannon to control the density of the foam. Turn clockwise for thicker foam, counter-clockwise for lighter foam.
- Adjust Spray Pattern: Rotate the adjustable spray nozzle at the front to change the spray pattern. You can switch between a concentrated jet stream for targeted cleaning or a wide fan spray for broad coverage.
- Apply Foam: Once adjusted, activate your pressure washer and spray the foam onto the desired surface (e.g., car, truck, driveway). Allow the thick snow foam to cling to the surface, loosening dirt, road grime, and contaminants.
- Rinse: After allowing the foam to work, rinse the surface thoroughly with clean water using your pressure washer.

Image: The foam cannon effectively applying thick, dense foam for a powerful deep clean, gently lifting dirt and grime from automotive paint.

Image: Detailed diagram of the foam cannon structure, labeling the Nickel-Plated Brass Body, Water/Soap Ratio Dial, 1/4" Quick Plug, Large Mouth Opening, Adjustable Spray Nozzle, 32oz (1L) Transparent Reservoir, and Stainless Steel Filter Block.
Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your foam cannon.
- Rinse After Each Use: After each use, fill the reservoir with clean water and spray it through the foam cannon to flush out any remaining soap solution. This prevents clogging.
- Clean Mesh Filter: The foam cannon features a unique threaded twist-down disassembly design for tool-free maintenance. To clean the mesh filter:
- Twist off the nozzle cap.
- Carefully take out the mesh filter.
- Rinse the mesh filter thoroughly with water to remove any debris or dried soap.
- Reinsert the clean mesh filter and twist the nozzle cap back on securely.
- Inspect Connections: Periodically check all connections for wear or damage. Replace any worn parts to maintain a leak-proof seal.

Image: Instructions for tool-free maintenance, showing how to twist off the nozzle cap and remove the mesh filter for quick cleaning and replacement.
Troubleshooting
- No Foam or Thin Foam:
- Check the soap-to-water ratio. Adjust the dial for thicker foam.
- Ensure the mesh filter is clean and not clogged. Refer to the Maintenance section for cleaning instructions.
- Verify that your pressure washer is operating within the recommended PSI range (1450-4000 PSI).
- Leaks from Connections:
- Ensure all connections are tightened securely.
- Check O-rings and seals for damage or wear. Replace if necessary.
- Difficulty Attaching/Detaching:
- Ensure the correct adapter is being used for your pressure washer model.
- Lubricate quick-connect fittings if they are stiff.
Specifications
| Attribute | Value |
|---|---|
| Capacity | 1 Liter (32 oz) |
| Pressure Range | 1450 - 4000 PSI (100 - 280 BAR) |
| Body Material | Nickel-Plated Brass |
| Nozzle Material | Copper |
| Interface Material | Alloy |
| Water Spray Type | Fan |
| Package Length | 19 cm |
| Package Width | 16 cm |
| Package Height | 14 cm |
| Package Weight | 0.787 kg |
Adapter Compatibility:
The foam cannon comes with 8 optional adapters to fit various pressure washer brands. Please ensure you select the correct adapter for your specific model.
- A: For Karcher K-Series pressure washer.
- B: For AR Blue Clean, Makita, most Bosch, Mac Allister, Black Decker, Cecotec, Michelin pressure washers.
- C: For some WAP (WL 1820, Ousada WL 2610), Tramontina (MASTER 1200W/1400W/1800W), Koblenz (HL-450 V, HL-310 V, HL-270 V), Vonder (LAV 1300, LAV 2000), Tekna (Smart Wash TK2, TK3, TK4) pressure washers.
- D: For Nilfisk, STIHL pressure washers.
- E: For Lavor, Sterwins, some WAP (WAP Ágil 1800, WAP Premier 2600, WAP New Eco Wash 2200), Koblenz (HLT-380 V) pressure washers.
- F: For Anlu, Kolner, some WAP (WAP Ousada Plus 2200, WAP Atacama Smart 2200, WAP Eco Wash 2350) pressure washers.
- G: For Nilfisk KEW, compatible with Nilfisk Alto pressure washers.
- H: For 1/4" Quick Plug (popular in Northern America).

Image: Dimensions in mm for the 1/4" Quick Plug adapter (11.5mm and G1/4 12.5mm).
User Tips
- Always ensure you select the correct adapter for your pressure washer to guarantee proper fit and prevent leaks. If unsure, compare the dimensions or connection type carefully.
- The foam cannon's robust construction is noted for its high quality, suggesting it can withstand regular use.
Warranty and Support
For any questions regarding the operation, maintenance, or troubleshooting of your BEAR FORCE Foam Cannon, please refer to this manual. For further assistance or warranty information, please contact the retailer or manufacturer directly. Keep your purchase receipt as proof of purchase.