Hcalory TB3

Contents

Hcalory TB3 Diesel Parking Heater User Manual

Model: TB3

Please read this manual carefully before use to understand the function and operation requirements of the product.

1. General Information

1.1 Product Overview

Diesel heaters are on-board heating devices that are independent of the automobile engine, and have their own fuel lines, circuits, combustion heating devices, and control devices. Originally, the machine was often used to preheat the engine and cab of a car parked in a cold environment in winter, as a way to eliminate cold start wear and tear of the car. Now diesel heaters have a wider range of uses, which can be used as space heating equipment in tents, indoors, and RVs, making users living and traveling more comfortable.

1.2 Explanation of Principles (Heat Source, Heating, Control)

1.2.1 Heat source:

After the equipment is started, the ignition plug will continue to heat up. This process takes 1-3 minutes, and then the fan will be started to deliver air to the combustion chamber. The diesel pump will also pump diesel into the combustion chamber. After the atomized diesel is mixed with gas, it begins to burn after coming into contact with the high-temperature ignition plug, generating a large amount of heat. The high-temperature exhaust gases after combustion are discharged from the exhaust gas outlet below.

1.2.2 Heating:

The heat generated in the combustion chamber is quickly transferred to the aluminum heat exchanger and dissipated into the warm air duct via the aluminum fins. An external fan blows the gas around the heat exchanger, and the heated air is blown out of the warm air outlet.

1.2.3 Control:

The controller is embedded in the device. The user can control the device through the switch panel connected to the controller, check the running status, control the gear, and make appointments. Users can also use the remote control or install the app developed by Hcalory for remote control.

1.3 Internal Key Parts Terminology

The diagram below illustrates the key internal components of the Hcalory TB3 Diesel Parking Heater. Understanding these parts is crucial for maintenance and troubleshooting.

Diagram of internal components including control box, ignition plug, combustion chamber, heating zone, air inlet, air outlet, air fan, flame retardant impeller, and safety plug.
Figure 1: Internal Key Parts Diagram. Components include Control box, Ignition plug, Safety plug, Air outlet, Combustion chamber, Heating zone, Air inlet, Air fan, and Flame retardant impeller.

2. Setup and Installation

2.1 Confirmation of Parts List

Before installation, please ensure all components are present as listed below:

Image showing all included parts: Host, Adapter, Wire harness, Silencer and accessories, Exhaust pipe, Air Outlet Pipe, Warm air outlet, Manual, Fixture Accessories set, LCD Switch, Remote control and USB charging cable, Controller extension cord, Exhaust Heat Wrap, Quick-Release Coupling, Base.
Figure 2: Included Parts List for Hcalory TB3 Heater.
  1. Host
  2. Adapter
  3. Wire harness
  4. Silencer and accessories
  5. Exhaust pipe
  6. Air Outlet Pipe
  7. Warm air outlet
  8. Manual
  9. Fixture Accessories set
  10. LCD Switch
  11. Remote control and USB charging cable
  12. Controller extension cord
  13. Exhaust Heat Wrap
  14. Quick-Release Coupling
  15. Base

2.2 Installation Guidance

Installation is straightforward. We have simplified the setup to ensure a hassle-free experience. First, connect the exhaust pipe and route it to an outdoor area to safely vent combustion gases. Then, connect the heater to either the AC/DC power adapter or a DC 12V/24V power source. Please ensure the exhaust pipe is securely fixed and extended outdoors before operation.

Installation diagram showing the heater connected to an exhaust pipe and power supply.
Figure 3: Installation Diagram. For air circulation heating, install the quick connector at the air intake.

WARNING: The exhaust pipe works at a very high temperature! During installation, use, maintenance, and scrapping of this machine, there shall be no flammable or explosive materials around the exhaust pipe, and care shall be taken to avoid igniting flammable materials that may cause fire.

The discharged exhaust gas can reach temperatures as high as 400°C. Please keep it away from your pets and children, and be aware of the gap from the ground to avoid damaging your floor or lawn.

2.3 Power Supply Requirements

Please use a 12V or 24V DC power supply to power your device, or use an AC to DC adapter. The discharge current is recommended to be greater than 15A (the device needs to heat the glow plug when starting, and the operating current may reach 12A and last for 3-5 minutes). When the heater is started, the ignition plug requires a relatively large current to heat, so an adapter with a voltage of 12V and a current of 12A or greater is needed as a power supply. After successful ignition, the equipment only needs a current of 1-4A to work continuously.

3. Safety Instructions (Read before use)

Read all safety warnings, instructions, illustrations, and instruction manuals provided with this diesel heater. Failure to follow all of the instructions below may result in electric shock, fire, or serious injury.

  • Do not replace important parts of the diesel heater without authorization. If parts need repair or replacement, please contact customer service for correct product specifications and model. Using the wrong specification may damage the combustion system.
  • The heater must not be used in places where flammable vapors or dust may be formed, such as fuel depots, carbon depots, timber depots, granaries, or similar locations. Keep away from diesel/gas stations, fuel tanks, compression tanks, fire extinguishers, clothing, and other flammable items.
  • Use the machine safely. Children are not allowed to play with this machine. Cleaning and maintenance must not be carried out unsupervised by children.
  • Do not go near flammable materials (the exhaust pipe temperature is very high when working). During installation, use, maintenance, and scrapping, ensure no flammable or explosive materials are around the exhaust pipe to prevent ignition and fire.
  • Keep ventilation and keep the pipes open. When installing, using, maintaining, and disposing of this equipment, ensure a ventilated area to prevent carbon monoxide poisoning. Place the metal exhaust pipe outdoors to prevent exhaust gases from entering the room.
  • Do not use the heater in an enclosed or unventilated place.
  • The heater should be turned off when adding diesel.
  • Do not cut off the power supply directly! After turning off the heating program, the equipment still needs to carry out an extinguishing and cooling process for 3-5 minutes. Cutting off power directly may cause abnormal shutdown and negatively impact the next start.
  • If the fuel system is leaking, contact after-sales personnel for parts and guidance.
  • Do not disconnect the power supply immediately after turning off the machine. It takes 3-5 minutes for the machine to stop working completely.
  • The first 3-5 minutes after turning on the machine is the preheating and ignition stage, during which the ignition plug, oil pump, and fan work according to the preset program. Hot air will blow out from the warm air duct after a few minutes.
  • It is recommended that appropriate labeled high-quality diesel must be switched at different temperatures to prevent waxing and clogging risks. All other types of fuel are strictly prohibited from use.
  • The ignition point of cotton and sponge is 150°C, paper is 130°C, cloth is 270°C, and diesel is 220°C. The hot air outlet can be higher than 150°C, and the exhaust pipe outlet can be higher than 270°C.

4. Operating Instructions

4.1 Control Panel Overview

The control panel allows you to manage various functions of the heater. Below is an illustration of the control panel and its key areas.

Image of the LCD control panel and remote control.
Figure 4: LCD Control Panel and Remote Control. Key areas include Clock display, Altitude, Display data and parameters, Settings, OK key, Host appearance, Power bar, Add key, Power on/off key, Minus key.

4.2 Icon Meanings

Icon Meaning Icon Meaning
FanFanBluetooth symbolBluetooth
!Fault prompt°CSensor failure
Plateau statusPlateau statusAAutomatic start/stop
Power failurePower failureTimer alarmTimer alarm
Ventilation statusVentilation statusIgnition plugIgnition plug
Manual modeManual modeFuel pumpFuel pump
High temperature alarmHigh temperature alarmConstant temperature modeConstant temperature mode

4.3 Basic Operations

4.3.1 Power On/Off Operation

  • Power-on: In the off state, press and hold the "U" button for 2 seconds to turn on the device.
  • Shutdown: In the power-on state, press and hold the "U" button for 2 seconds. The device will enter the shutdown and cooling process, and the display will show "OFF". The device will shut down after cooling. Do not force power off when it displays "OFF" as this can damage accessories due to high internal temperatures. Wait until the machine displays the shutdown state before powering off.

4.3.2 Manual Mode Operation

Manual mode has 10 gears (H1-HH10), with HH10 indicating maximum power. Press the "▲" or "▼" key to increase/decrease the gear. The display will show the current gear.

4.3.3 Constant Temperature Mode Operation

In constant temperature mode, press the "▲" or "▼" key to increase or decrease the temperature value. The setting range is 0 to 40°C. Press and hold the "U" button for 2 seconds to switch between manual and constant temperature mode.

4.3.4 Automatic Start-Stop Operation

In constant temperature mode, short press the "U" key. The icon "A" will be displayed, indicating that the automatic start/stop function is successfully turned on. Short press the "U" key again, and the icon "A" will disappear, indicating the function is turned off. (Default settings: startup at -2°C, shutdown at +3°C relative to set temperature. These values can be changed via the mobile app).

4.3.5 Ventilation Operation

In the off state, press and hold the "⚙" key for 2 seconds to turn on the ventilation state. The display will show the fan icon. Press "▲" or "▼" to adjust the fan speed gear. Press and hold "⚙" or "U" for 2 seconds to exit ventilation mode.

4.3.6 Switch to Display Data at Startup

Press the "OK" button briefly during operation to cycle through display information: Shell Temp -> Voltage -> Ambient Temp -> CO Level (if CO-enabled remote is paired) -> Power Level (or Target Temp).

4.3.7 Temperature / Altitude Unit Switch

  • Press and hold the "U" + "▲" keys for 2 seconds to switch between °C/°F.
  • Press and hold the "⚙" + "U" keys for 2 seconds to switch between KM/MFT.

4.3.8 Manual Oiling Operation

In the off state, press the "▲" + "▼" keys for 2 seconds at the same time to manually control the oil pump to pump oil. Release the keys to stop pumping oil. Use with caution!

4.3.9 One-Click Carbon Removal

In the shutdown state, long-press the "⚙" + "▼" buttons simultaneously for 2 seconds. The screen will display "CLEA" and "MAX" will flash, activating the carbon removal function. It will automatically turn off after 20 minutes. During this period, you can long-press the "U" button for 2 seconds to manually deactivate this function.

4.3.10 Altitude Enabling and Compensation

  • Altitude Enabling: Press and hold the "⚙" + "OK" keys for 2 seconds. The icon "▲" is displayed to turn on plateau mode, adjusting the air-oil ratio. Press and hold again to turn off.
  • Altitude Compensation: In the power-on state, simultaneously long-press the "⚙" + "▲" buttons for 2 seconds to enter plateau compensation settings. "CALt" will be displayed. Press "▲" or "▼" to increase or decrease altitude (calibration range ±3km). Press "OK" to save.

4.3.11 Scheduled On/Off Operation

Press and hold the "⚙" + "OK" keys for 2 seconds. If no timer is set, it will enter the timer setting interface. The indicator symbol "Q" is displayed. "CLOS" sets shutdown time, "OPEN" sets startup time. If a timer is already on, the "Q" symbol will go out. Use "▲" or "▼" to adjust time, "U" to switch digits, "OK" to save. The symbol "Q" flashes when timing is active. Press "⚙" to view all timing times.

4.3.12 Clock Synchronization Operation

Press and hold the "U" button for 2 seconds to enter the clock adjustment interface, displaying "CLOC". Use "▲" or "▼" to adjust time, "U" to switch digits, "OK" to confirm time and enter day of week setting. The phone time will automatically synchronize when the APP is connected via Bluetooth.

4.3.13 Wireless Remote Control Matching

In the off state, press and hold the "U" + "▲" keys for 2 seconds. "HFA1" will be displayed. Use "▲" or "▼" to adjust the 4th digit (remote control number 1-3). Select a number and press any button on the remote to pair. Press "⚙" to exit. To clear pairing, long-press "⚙" for 2 seconds in the pairing interface; "CLEA" will be displayed.

5. Bluetooth App Control

If your version includes Bluetooth, you can control your parking heater through the Hcalory app. If unsure, contact customer service.

5.1 How to Download the App

Android users can download the installation package from the Google Play store. Apple users can download from the App Store. Alternatively, scan the QR codes below to install the "Hcalory" APP.

QR code for Android App download
For Android
QR code for iOS App download
For iOS

5.2 Instructions for App Operation

  • Adding a Device: When you first enter the application, click the "+" sign to add a device.
  • Permissions: When searching for devices, you need to turn on Bluetooth and authorize precise positioning information. Refusing authorization may prevent the app from finding nearby devices. You also need to allow Hcalory to discover and connect to nearby devices.
  • Bluetooth Connection: If the Bluetooth interface doesn't pop up, click the [Bluetooth icon] to search for devices. Select the device with "hcalory" in its name. If your phone is already connected to a device, other phones cannot connect until your phone exits the connection.
  • Start Heating: Click the [heating button] to start regular heating mode. You can choose [temperature mode] (device intelligently controls gears based on set temperature, suitable for indoors) or [gear mode] (fixed gear, suitable for open areas or tents with poor insulation).
  • Blow-Wind Mode: In ventilation mode, there are ten adjustable wind speeds. The device does not execute the combustion program and can be used as a fan or exhaust fan.
  • Plateau Button: Due to low air pressure and oxygen content at high altitudes, the air-fuel ratio needs adjustment. When the plateau key is on, the device simulates high-altitude environments and adjusts oil pump frequency. It's recommended for 2000-5000 meters above sea level.
  • Scheduled Timing: The device can be set with multiple timers. For timed on/off to work, the heater must remain powered on. If power is off, the controller cannot execute timed commands.
  • Other Settings: The app includes other settings for language/temperature units and user feedback.

6. Maintenance

6.1 Self-Cleaning Function

The Hcalory TB3 features a one-click self-cleaning function to maintain your diesel heater and prolong its lifespan. This process helps to burn off carbon buildup and blow out carbon residue.

Diagram showing the 3 steps of one-click self-cleaning: Turn on, Ignite to burn off carbon buildup, Blow out the carbon residue.
Figure 5: One-Click Self-Cleaning Steps.

To activate: In the shutdown state, long-press the "⚙" + "▼" buttons simultaneously for 2 seconds. The screen will display "CLEA" and "MAX" will flash, activating the carbon removal function. It will automatically turn off after 20 minutes. During this period, you can long-press the "U" button for 2 seconds to manually deactivate this function.

6.2 Fuel Type Recommendations

It is recommended to use high-quality diesel appropriate for the ambient temperature to prevent waxing and clogging risks. All other types of fuel are strictly prohibited.

6.3 General Care

  • Ensure all air ducts are unobstructed and that there is no folding, compression, or blockage in the pipes to maintain heating efficiency and normal operation.
  • Regularly check for any fuel system leaks. If leaks are found, contact customer service for repair.
  • Keep the exhaust pipe clear of debris and ensure it is properly vented outdoors.

7. Troubleshooting (Error Codes)

The device may display error codes if a fault occurs. Refer to the table below for common error codes and their solutions.

Fault Code Cause Solution
E021Power supply voltage is too low1) Check whether the battery connection wires are damaged and whether the connectors are secure. 2) Check whether the fuse is aging.
E022Power supply voltage is too highThe power supply voltage is too high, reminding you to check the battery output voltage range.
E023Abnormal power supply voltageThe power supply voltage selection is abnormal, reminding you to check the battery output voltage range.
E031Ignition plug open circuit1) Check whether the connecting wires and connectors of the ignition plug are loose or broken. 2) Check whether the ignition plug connection plug is loose. 3) Connect the ignition plug to check if it is damaged.
E032Glow plug short circuit1) Check whether the connecting wire of the ignition plug is short-circuited. 2) The ignition plug is damaged or the main board reads incorrectly.
E041Oil pump open circuit1) Check whether the connecting wires and connectors of the oil pump are damaged, loose or broken. 2) Check if the oil pump is damaged.
E042Oil pump short circuit1) Check whether the connecting wire of the oil pump is short-circuited. 2) Check whether the oil pump is blocked or damaged.
E05High temperature alarm (housing > 230°C)1) Check whether the cold air inlet is blocked. 2) Check whether the hot air outlet pipe is bent or blocked. 3) Check whether the fan is running normally. 4) Check whether the sensor is damaged.
E061Motor open circuit1) Check whether the connecting wires of the motor are broken or loose. 2) Connect the motor to the power supply and check whether it rotates.
E062Motor short circuit1) Check whether the connecting wires of the motor are short-circuited. 2) The motor is damaged or the main board is misread.
E063Abnormal fan speed1) Check if the impeller is stuck. 2) The gap between the magnet on the wind wheel and the Hall sensor on the controller is too large.
E07Communication between the main board and the remote control switch board is abnormal1) Check whether the connection port of the remote control switch is loose. 2) Check if the connection line (blue) of the remote control switch is broken.
E08Turn off the flame1) Check whether there is oil shortage, oil freezing at low temperature, oil circuit blockage, oil pipe folding, too many steam drums in the oil pipe, or oil pump stuck. 2) Check whether the oxygen inlet and exhaust air ducts are unobstructed. 3) Check whether the housing temperature sensor is in full contact with the housing and whether the compression spring is strong. 4) Check whether the sensor is damaged.
E091Temperature sensor open circuit1) Check whether the temperature sensor connection wire and connector are damaged or loose. 2) Check if the sensor is damaged.
E092Temperature sensor short circuit1) Is the temperature sensor connection line short-circuited? 2) Check if the sensor is damaged.
E10Startup failed1) The casing temperature is too high and the casing cannot be cooled down after 3 minutes of startup. 2) There is a lot of white smoke at the exhaust port: Check whether the filter next to the ignition plug is clean; Check whether the oil pump sprays oil effectively; Check whether the ignition plug is aged. 3) The exhaust gas has a small amount of white smoke or no smoke: Check whether there is oil shortage, oil circuit is frozen or blocked; Check if the oil pump is stuck or damaged and unable to pump oil; Check whether the combustion air intake and exhaust passages are unobstructed; Check whether the ignition plug is damaged; Is the gap between the inner wind wheels too large? 4) Ignition is normal but ignition failure is still reported: Check whether the housing temperature sensor is in full contact with the housing and whether the compression spring is strong. Is the sensor normal?
E11Carbon monoxide concentration exceeds limitIncrease air exchange in the environment to reduce carbon monoxide concentration: evacuate personnel to a safe environment.

8. Specifications

Attribute Value
Brand NameHcalory
ModelTB3
Power (W)8KW
Diesel Consumption0.11 L/h (Level 1) - 0.34 L/h (Level 10)
Voltage12V / 24V DC / 220~240V AC
MaterialMetal and Plastic
Fuel Tank Capacity (Built-in)6L
Fuel TypeDiesel
External Testing CertificationCE
Operating Temperature-40℃~40℃ (-40℉~104℉)
Wireless Temperature SensorSupport
Bluetooth APP ControlSupport
Remote ControlSupport
LCD Panel ControlSupport
Auto Plateau ModeAutomatic Adjustment (Equipped with an altitude sensor)
Item Diameter9cm
Item Weight10.6kg
Item Height58.5cm
Item Width25.5cm
Item Length49.5cm

9. User Tips

  • Optimal Fuel Usage: To maximize runtime and efficiency, especially in varying temperatures, ensure you use the correct grade of diesel fuel. The 6L tank can provide up to 46 hours of heating on the lowest setting.
  • Altitude Adaptation: When operating in mountainous or high-altitude regions, remember to enable the plateau mode via the control panel or app. This ensures stable combustion and prevents issues like flameouts or black smoke.
  • Regular Cleaning: Utilize the one-click self-cleaning function periodically to prevent carbon buildup. This simple maintenance step significantly extends the heater's lifespan and maintains optimal performance.
  • Quiet Operation: The upgraded silent oil pump is designed for minimal noise (around 55dB). For an undisturbed rest, ensure the heater is placed on a stable surface and that air ducts are free from obstructions.
  • Smart Temperature Control: Leverage the ±2°C precision control for consistent warmth. For small spaces like RVs or tents, this feature minimizes temperature fluctuations, providing a stable and comfortable environment without constant manual adjustments.
  • Safety First: Always ensure the exhaust pipe is securely routed outdoors and away from flammable materials. Never operate the heater in an enclosed or unventilated space to avoid carbon monoxide hazards.

10. Warranty and Support

Thank you for your support and trust in us. Parking heater structures are complex, and you may encounter various unexpected situations. If you encounter difficulties that you cannot resolve, you can contact us, and we will guide you in adjustments or repairs.

If you need our after-sales technical support, or if you have any questions about our products, you can send an email to hcalory@hcalory.com or contact our after-sales personnel through the sales platform where you purchased the product. We will provide you with more detailed instructions or operational videos.

For a comprehensive guide, you can also refer to the User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.