Hcalory TB-MAX2

Contents

Hcalory TB MAX 2 Diesel Air Heater User Manual

Model: TB-MAX2

Brand: Hcalory

1. Introduction

The Hcalory TB MAX 2 Diesel Air Heater is an on-board heating device independent of the automobile engine. It features its own fuel lines, circuits, combustion heating devices, and control systems. Originally designed for preheating vehicle engines and cabs in cold environments, it now offers a wider range of uses, including space heating for tents, indoor spaces, and RVs, enhancing comfort for users during travel and living.

This manual provides detailed instructions for the safe and efficient operation and maintenance of your Hcalory TB MAX 2 Diesel Air Heater. Please read it carefully before use to understand all functions and operational requirements.

2. Safety Instructions

Read all safety warnings, instructions, illustrations, and instruction manuals provided with this diesel heater. Failure to follow all instructions may result in electric shock, fire, or serious injury.

General Safety Warnings

  • Do not replace important parts of the diesel heater without authorization. For repairs or part replacements, contact customer service for correct product specifications and models. Using incorrect specifications may damage the combustion system.
  • The heater must not be used in places where flammable vapors or dust may be present, such as:
    • Fuel depots, carbon depots, timber depots, granaries, and similar locations.
    • Diesel/gas stations. Keep away from fuel tanks, compression tanks, fire extinguishers, clothing, and other flammable items.
  • Use the machine safely and understand its hazards. Children are not allowed to play with this machine. Cleaning and maintenance must not be carried out unsupervised by children.
  • Do not go near flammable materials (the exhaust pipe operates at very high temperatures)! During installation, use, maintenance, and scrapping, ensure no flammable or explosive materials are around the exhaust pipe to prevent ignition and fire.
  • Ensure proper ventilation and keep pipes unobstructed. When installing, using, maintaining, and disposing of this equipment, ensure a ventilated area to prevent carbon monoxide poisoning. Place the metal exhaust pipe outdoors to prevent exhaust gases from entering the room.
  • Do not use the heater in an enclosed or unventilated place.
  • The heater should be turned off when adding diesel.
  • Do not cut off the power supply directly! After turning off the heating program, the equipment needs 3-5 minutes for extinguishing and cooling. Cutting off power during normal operation may cause abnormal shutdown and negatively impact future starts.
  • If the fuel system is leaking, contact after-sales personnel for parts and repair guidance.
  • During operation, it is strictly forbidden to directly cut off the power supply to stop the heater.
  • When installing the pipeline, ensure it is unblocked and not squeezed or blocked.
  • After overheating protection, the machine stops heating. Do not turn off the power. It can be restarted once it has cooled down naturally and shut down.
  • Do not disconnect the power supply immediately after turning off the machine. It takes 3-5 minutes for the machine to stop working completely.
  • The preheating and ignition stage takes 3-5 minutes after turning on, during which the ignition plug, oil pump, and fan operate according to the preset program. Hot air will blow out after a few minutes.
  • When starting, the ignition plug requires a relatively large current. Use a 12V/12A or greater adapter. After successful ignition, the equipment needs only 1-4A to work continuously.
Triple Safety Protection diagram
Figure 2.1: Triple Smart Protection. This diagram illustrates the three main safety features: Overheat Protection, Overvoltage Protection, and Flame Failure Cut-Off, ensuring 100% peace of mind.

WARNING: The exhaust pipe works at a very high temperature! During installation, use, maintenance, and scrapping, ensure no flammable or explosive materials are around the exhaust pipe. Take care to avoid igniting flammable materials that may cause fire.

3. Product Overview and Principles

3.1 Explanation of Principles (Heat Source, Heating, Control)

3.1.1 Heat Source

Upon starting, the ignition plug heats for 1-3 minutes. The fan then delivers air to the combustion chamber, and the diesel pump injects diesel. The atomized diesel mixes with air and ignites upon contact with the high-temperature ignition plug, generating significant heat. High-temperature exhaust gases are discharged from the exhaust outlet.

3.1.2 Heating

Heat from the combustion chamber is rapidly transferred to the aluminum heat exchanger and dissipated into the warm air duct via aluminum fins. An external fan blows air around the heat exchanger, and the heated air is expelled from the warm air outlet.

3.1.3 Control

The device has an embedded controller. Users can control the device via a connected switch panel, checking status, controlling gears, and setting appointments. Remote control is also possible via a dedicated Hcalory app or a physical remote control.

3.2 Internal Key Parts Terminology

Internal components diagram of the Hcalory diesel heater
Figure 3.1: Internal Components. This diagram shows the main internal parts including the Control box, Ignition plug, Safety plug, Air outlet, Combustion chamber, Heating zone, Air inlet, Air fan, and Flame retardant impeller.

4. Installation Instructions

4.1 Confirmation of Parts List

Before installation, please verify that all the following components are included in your package:

Item No.ComponentDescription
01HostMain heater unit
02AdapterPower adapter
03Wire harnessWiring for connections
04Silencer and accessoriesFor exhaust noise reduction
05Exhaust pipeTo vent combustion gases
06Air Outlet PipeFor heated air distribution
07Warm air outletOutlet for warm air
08ManualThis instruction manual
09Fixture Accessories setMounting hardware
10LCD SwitchControl panel for operation
11Remote control and USB charging cableFor remote operation and charging
12Controller extension cordExtends reach of control panel
13Exhaust Heat WrapInsulation for exhaust pipe
14BaseMounting base for the heater
15Foot padFor stability and vibration reduction

4.2 Installation Diagram and Steps

Hcalory TB MAX 2 Diesel Air Heater with exhaust pipe and power connections
Figure 4.1: Installation Overview. This image shows the main unit, exhaust pipe connection, and power supply. The heater is designed to be mounted outside the vehicle, with the exhaust directed away from living spaces.

Installation is straightforward. First, connect the exhaust pipe and route it to an outdoor area to safely vent combustion gases. Then, connect the heater to either the AC/DC power adapter or a DC 12V/24V power source. Ensure the exhaust pipe is securely fixed and extended outdoors before operation.

Please use a 12V or 24V DC power supply, or an AC to DC adapter. The discharge current is recommended to be greater than 15A (the device needs to heat the glow plug when starting, and the operating current may reach 12A and last for 3-5 minutes).

ECO Fuel Hose comparison
Figure 4.2: ECO Fuel Hose. This image highlights the durability and flexibility of the ECO Fuel Hose, which is resistant to cracking and aging, ensuring steady fuel flow even in extreme temperatures (-40°F to 248°F), unlike conventional hoses that can become brittle and leak.

5. Operating Instructions

5.1 Control Panel Overview

Control panel and remote control for Hcalory TB MAX 2
Figure 5.1: Control Panel and Remote. This image displays the main LCD control panel and the wireless remote control, showing various settings and display data.

The control panel allows you to manage all functions of the heater. Key elements include:

  • 1. Add key: Increase values or navigate menus.
  • 2. Power on/off key: Turn the device on or off.
  • 3. Minus key: Decrease values or navigate menus.
  • 4. OK key: Confirm selections.
  • 5. Settings: Access various settings.
  • 6. Altitude: Displays current altitude.
  • 7. Clock display: Shows current time.
  • 8. Power bar: Indicates power level.
  • 9. Display data and parameters: Shows various operational data.
  • 10. Host appearance: Visual representation of the heater.

5.2 Icon Meanings

IconMeaning
FanFan operation
Bluetooth symbolBluetooth connectivity
!Fault prompt
°C sensor failureTemperature sensor failure
Plateau statusAltitude mode active
AAutomatic start/stop function
Power failurePower supply issue
Timer alarmTimer function active
Ventilation statusVentilation mode active
Ignition plugIgnition plug status
Manual modeManual control mode
Fuel pumpFuel pump operation
High temperature alarmHigh temperature warning
Constant temperature modeConstant temperature control mode

5.3 Basic Operation

5.3.1 Power On/Off

  • Power-on: In the off state, press and hold the "Power on/off key" for 2 seconds to turn on the device.
  • Shutdown: In the power-on state, press and hold the "Power on/off key" for 2 seconds. The device will enter a shutdown and cooling process, displaying "OFF". It will shut down after cooling. Do not force power off when "OFF" is displayed, as high internal temperatures can damage accessories. Wait until the machine displays a shutdown state before powering off.

5.3.2 Heating Modes

  • Manual Mode: Offers 10 gears (H1-H10), with H10 being maximum power. Use the "Add key" or "Minus key" to adjust the gear.
  • Constant Temperature Mode: Use the "Add key" or "Minus key" to set the desired temperature from 0 to 40°C. Press and hold the "Power on/off key" for 2 seconds to switch between manual and constant temperature modes.
  • Automatic Start-Stop: In constant temperature mode, short press the "Power on/off key" to activate/deactivate auto start-stop. The icon "A" indicates activation. (Default settings: turns on when ambient temperature drops by 2°C below set temp, turns off when ambient temperature rises by 3°C above set temp. These values can be changed via the mobile app.)

5.3.3 Ventilation Operation

  • In the off state, press and hold the "Settings" key for 2 seconds to enter ventilation mode.
  • Use the "Add key" or "Minus key" to adjust fan speed.
  • Press and hold the "Settings" key for 2 seconds to exit ventilation mode.

5.3.4 Display Data Cycle

  • Briefly press the "OK" button during operation to cycle through display information: Shell Temp -> Voltage -> Ambient Temp -> CO Level (if CO-enabled remote is paired) -> Power Level (or Target Temp).

5.3.5 Unit Switching

  • Temperature: Press and hold the "Power on/off key" + "Add key" simultaneously for 2 seconds to switch between °C/°F.
  • Altitude: Press and hold the "Settings" + "Add key" simultaneously for 2 seconds to switch between KM/MFT.

5.3.6 Manual Oiling

  • In the off state, press the "Add key" + "Minus key" simultaneously for 2 seconds to manually control the oil pump. Release keys to stop. Use with caution!

5.3.7 One-Click Carbon Removal

  • In the shutdown state, long-press the "Settings" + "Minus key" simultaneously for 2 seconds. The screen will display "CLEA" and "MAX" will flash, activating the carbon removal function. It automatically turns off after 20 minutes. During this period, you can long-press the "Power on/off key" for 2 seconds to manually deactivate this function.

5.3.8 Altitude Enabling and Compensation

Adaptive Plateau Mode diagram
Figure 5.2: Adaptive Plateau Mode. This feature allows the heater to adjust combustion for optimal performance at various altitudes: 0-2000M (Standard Stable Combustion), 2000-5000M (Active Compensation Zone), and up to 5500M (Extreme Condition Built).
  • Altitude Enabling: Press and hold the "Settings" + "Add key" + "OK key" simultaneously for 2 seconds. The icon will display, activating plateau mode and including the air-oil ratio in altitude conversion. Repeat to deactivate.
  • Altitude Compensation: In power-on state, long-press the "Settings" + "Add key" simultaneously for 2 seconds to enter plateau compensation settings ("CALt"). Use "Add key" or "Minus key" to adjust altitude (calibration range ±3km). Press "OK" to save.

5.3.9 Scheduled On/Off Operation

Multiple Timed Settings via app
Figure 5.3: Multiple Timed Settings. This image shows the app interface for setting multiple timed on/off schedules for the heater, allowing for automated operation.
  • Press and hold the "OK" + "Minus key" simultaneously for 2 seconds. If no timer is set, it will activate and enter the timer setting interface. The indicator symbol will display.
  • "CLOS" sets shutdown time, "OPEN" sets startup time.
  • Use "Add key" or "Minus key" to adjust time. Use "Power on/off key" to switch adjustment digits. Press "OK" to save.
  • If the timer is already on, turn off all timers and the symbol will disappear.

5.3.10 Clock Synchronization

  • Press and hold the "Power on/off key" for 2 seconds to enter clock adjustment ("CLOC").
  • Use "Add key" or "Minus key" to adjust time (00:00-23:59). Use "Power on/off key" to switch digits. Press "OK" to confirm.
  • For weekday settings ("EE-1"), use "Add key" or "Minus key" to adjust. Press "OK" to confirm.
  • When the app is connected via Bluetooth, the phone time will automatically synchronize.

5.3.11 Wireless Remote Control Matching

  • In the off state, press and hold the "Power on/off key" + "Add key" simultaneously for 2 seconds. "HFA1" will display.
  • Use "Add key" or "Minus key" to adjust the 4th digit (remote control number 1-3).
  • Select the number and press any button on the remote to pair. Exit after successful pairing.
  • To clear pairing, long-press the "Settings" key for 2 seconds in the pairing interface. "CLEA" will display, and all paired remotes will be cleared.

5.3.12 Screen Brightness Adjustment

  • In the power-on state, press and hold the "Add key" + "Minus key" simultaneously for 2 seconds. The "AIRHEATER" icon will flash.
  • Use "Add key" or "Minus key" to adjust brightness. Press and hold "Add key" + "Minus key" again for 2 seconds to confirm.

5.3.13 Bluetooth Password

  • To check the Bluetooth password, press "OK" + "Add key" simultaneously. A 4-digit number will display (initial password is "0000").
  • To initialize the Bluetooth password, in the off state, press and hold "OK" + "Power on/off key" for 2 seconds. Enter "3333" as the password. Use "Add key" or "Minus key" to adjust numbers, "Power on/off key" to switch digits. Press "OK" to confirm.

5.3.14 Oil Pump Frequency Adjustment (For professionals only)

  • In the off state, press and hold "OK" + "Settings" for 2 seconds. Enter "3638" as the password.
  • "1-2.0" will display (1st gear frequency is 2.0, 10th gear is 'A'). Use "Add key" or "Minus key" to adjust frequency. Use "Power on/off key" to switch gears. Press "OK" to confirm.
  • To initialize oil pump frequency, in the off state, press and hold "OK" + "Power on/off key" for 2 seconds. Enter "6666" as the password. Use "Add key" or "Minus key" to adjust numbers, "Power on/off key" to switch digits. Press "OK" to confirm.

6. Bluetooth App Operating Instructions

If your heater has Bluetooth, you can control it via the Hcalory app. If unsure, contact customer service.

6.1 How to Download the App

Android users can download the installation package from the Google Play Store. Apple users can download from the App Store or scan the QR code below to install the "Hcalory" APP.

QR codes for Hcalory app download
Figure 6.1: App Download QR Codes. Scan the left QR code for Android devices (Google Play Store) and the right QR code for iOS devices (App Store).

6.2 Instructions for App Operation

  • Adding a Device: When you first open the app, click the "+" sign to add a device.
  • Bluetooth Permissions: When searching for devices, enable Bluetooth and authorize precise positioning. Refusing authorization may prevent device discovery.
  • Connecting to Device: Allow Hcalory to discover and connect to nearby devices. If the Bluetooth interface doesn't pop up, click the Bluetooth icon to search. Select the device with "hcalory" in its name. If your phone is already connected, other phones cannot connect until your phone disconnects.
  • After successful connection, the device can perform various operations via the app.
Hcalory app showing High Plateau mode
Figure 6.2: App Control - High Plateau Mode. The app allows activation of High Plateau mode for optimal performance at altitude.
Hcalory app showing Gear/Temperature Setting
Figure 6.3: App Control - Gear/Temperature Setting. Adjust heating intensity or target temperature directly from the app.
Hcalory app showing Blowing Mode
Figure 6.4: App Control - Blowing Mode. The app allows activation of a fan-only mode for air circulation without heating.

7. Maintenance

7.1 Efficient Self-Cleaning System

One-Tap Deep Carbon Clean feature
Figure 7.1: One-Tap Deep Carbon Clean. This feature extends lifespan and saves fuel by burning off soot deposits at 1000°C within 20 minutes, restoring heating efficiency and low fuel consumption. An intelligent maintenance reminder activates after 100 operating hours.

The one-tap soot cleaning feature burns off stubborn soot deposits at 1000°C within 20 minutes, restoring fast ignition, 47% heating efficiency, and extremely low fuel consumption of 0.13 l/h – without disassembly. An intelligent maintenance reminder after 100 operating hours automatically signals cleaning needs, protecting the alloy core and extending the life of the glow plug and motor. This process is safe, automatic, and tool-free.

7.2 General Maintenance Tips

  • Regularly check all air ducts to ensure they are unobstructed and free from folding, compression, or blockages. This ensures efficient heating and normal operation.
  • Only use fuel that meets the required standards to ensure normal use and service life of the equipment.
  • Keep the exterior of the heater clean.
  • Periodically check all electrical connections for tightness and signs of wear.

8. Troubleshooting

The control panel may display fault codes (e.g., "E-21") if an issue occurs. The fault symbol and corresponding faulty device icon will flash. Refer to the table below for meanings and solutions.

8.1 Error Codes and Solutions

Fault CodeCauseSolution
E021Power supply voltage is too low1) Check if battery connection wires are damaged or connectors are loose. 2) Check if the fuse is aging.
E022Power supply voltage is too highThe power supply voltage is too high. Check the battery output voltage range.
E023Abnormal power supply voltagePower supply voltage selection is abnormal. Check the battery output voltage range.
E031Ignition plug open circuit1) Check if connecting wires and connectors of ignition plug are loose or broken. 2) Check if ignition plug connection plug is loose. 3) Connect ignition plug to check if it is damaged.
E032Glow plug short circuit1) Check if connecting wire of ignition plug is short-circuited. 2) Ignition plug is damaged or main board reads incorrectly.
E041Oil pump open circuit1) Check if connecting wires and connectors of oil pump are damaged, loose or broken. 2) Check if oil pump is damaged.
E042Oil pump short circuit1) Check if connecting wire of oil pump is short-circuited. 2) Check if oil pump is blocked or damaged.
E05High temperature alarm (housing > 230°C)1) Check if cold air inlet is blocked. 2) Check if hot air outlet pipe is bent or blocked. 3) Check if the fan is running normally. 4) Check if the sensor is damaged.
E061Motor open circuit1) Check if connecting wires of motor are broken or motor connecting wire connector is loose. 2) Connect motor to power supply and check if it rotates.
E062Motor short circuit1) Check if connecting wires of motor are short-circuited. 2) Motor is damaged or main board is misread.
E063Abnormal fan speed1) Check if the impeller is stuck. 2) The gap between the magnet on the wind wheel and the Hall sensor on the controller is too large.
E07Communication between main board and remote control switch board is abnormal1) Check if the connection port of the remote control switch is loose. 2) Check if the connection line (blue) of the remote control switch is broken.
E08Turn off the flame1) Check for oil shortage, oil freezing, oil circuit blockage, bent oil pipe, too many steam drums, or stuck oil pump. 2) Check if oxygen inlet and exhaust air ducts are unobstructed. 3) Check if housing temperature sensor is in full contact with housing and compression spring is strong. 4) Check if the sensor is damaged.
E091Temperature sensor open circuit1) Check if temperature sensor connection wire and connector are damaged or loose. 2) Check if the sensor is damaged.
E092Temperature sensor short circuit1) Is the temperature sensor connection line short-circuited? 2) Check if the sensor is damaged.
E10Startup failed1) Casing temperature is too high and cannot be cooled after 3 minutes. 2) White smoke at exhaust port: Check/clean filter, oil pump spray, ignition plug age. 3) Small/no white smoke: Check for oil shortage, frozen/blocked oil circuit, stuck/damaged oil pump, unobstructed air intake/exhaust, damaged ignition plug, inner wind wheel gap. 4) Normal ignition but failure reported: Check housing temperature sensor contact and compression spring.
E11Carbon monoxide concentration exceeds limitIncrease air exchange in the environment to reduce carbon monoxide concentration; evacuate personnel to a safe environment.

9. Specifications

FeatureSpecification
Brand NameHcalory
ModelTB-MAX2
Power (W)8KW
Voltage12V / 24V DC / 220~240V AC
MaterialMetal and Plastic
Fuel Tank Capacity (Built-in)7.9L
Fuel TypeDiesel
External Testing CertificationCE
CertificationRoHS, FCC, CE
Operating Temperature-40℃~40℃ (-40℉~104℉)
Wireless Temperature SensorSupport
Bluetooth APP ControlSupport
Remote ControlSupport
LCD Panel ControlSupport
AC AdapterIncluded (220~240V)
Altitude ModeAutomatic Adjustment (Equipped with an altitude sensor)
Item Diameter9cm
Item Weight12.7kg
Item Height49cm
Item Width35cm
Item Length47cm

9.1 Package Contents

  • 1 x Diesel Air Heater
  • 1 x AC Power Adapter
  • 1 x Wireless Temperature Sensing Remote
  • 1 x Power Line
  • 1 x Muffler
  • 1 x Exhaust hose
  • 1 set Screw Accessory Kit

10. User Tips

  • Power Versatility: The Hcalory TB MAX 2 supports both 12V/24V DC power supplies and includes a 220V adapter. This means you can connect it to a standard wall outlet at home or directly to your vehicle's power supply, offering great flexibility for various applications.
  • Exhaust Placement: Always ensure the exhaust pipe is securely fixed and directed outdoors, away from any living or sleeping areas, to prevent exhaust gases from entering the room.
  • Initial Setup: Be patient during the initial 3-5 minute preheating and ignition phase. Hot air will start flowing shortly after.
  • Noise Reduction: The improved silent pump and muffler significantly reduce noise levels, making it suitable for quiet environments like RVs during the night.

11. Warranty and Support

Thank you for your support and trust in Hcalory products. Parking heater structures can be complex, and unexpected situations may arise due to varied outdoor or indoor environments. If you encounter difficulties that you cannot resolve, please contact us for guidance, adjustments, or repairs.

For after-sales technical support or any product-related questions, you can send an email to hcalory@hcalory.com or contact our after-sales personnel through the sales platform where you purchased the product. We will provide detailed instructions or operational videos as needed.

© 2024 Hcalory. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.